Francis Pelton Equipment
-
Manufactured by Wagstaff Applied Technologies - a division of Wagstaff, Inc.based in USA
Wagstaff Applied Technologies provides reconditioning services for Francis, Kaplan, Pelton, and other turbine runners. Wagstaff AT performs welding operations per AWS or ASME codes, using an established suite of welding procedures. Runners are typically machined on our CNC horizontal boring machines. Wagstaff AT inspects machined parts ...
-
Manufactured by Wasserkraft Volk AGbased in GERMANY
It combines the advantages of the Pelton and Francis turbines. Designed for water heads between 50 and 300 m, with very good partial-load efficiency, high floating-debris tolerance and power outputs of up to 10 MW; it is suitable for challenging sites with variable water ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
The Hydro Energia own hydroelectric Turbines technology is based on 25 years long experience in design and production of the main type of turbines such as: Kaplan, Francis and Pelton from 100 kW up to 40 MW, each ones with various setting according to the needs of our Costumers. In the last years almost 200 hydro units have been ...
-
Manufactured by S.W.H. GROUP SEbased in CZECH REPUBLIC
types - Crossflow, Francis, Kaplan, ...
-
Manufactured by F.Nencini Srlbased in ITALY
They allow a very high upstream pressure loss, without any risk of critical phenomena (cavitation, vibration, noise) even with little downstream head pressure. They are also used as synchronous discharge tool for turbine plants (mainly Pelton or Francis turbines) because they are able to work in high pressure condition. The discharge is ...
-
Manufactured by Potencia Industrialbased in MEXICO
Potencia Industrial designs and manufactures hydroelectric generators up to 30 MW, vertical and horizontal, suitable for Kaplan, Pelton and Francis turbines, for high or low speeds, with overspeed capacity up to over 200% nominal with high axial thrust. In the last 5 years we supplied over 60 MW of hydroelectric generators, installed at ...
-
Manufactured by Dependable Turbines Ltd. (DTL)based in CANADA
is thoroughly engineered and checked to provide the most cost effective option for your site. Our products include Pelton, Turgo, Francis, Kaplan, Propeller and Fixed Flow Pump turbines with a capacity up to 10 MW. With this superior range of turbine types, a turbine can be selected and designed specifically based on the site hydraulic conditions of ...
-
Manufactured by Sorgent.e Srlbased in ITALY
Thanks to the use of its own operating structures and resources and to partnerships with important international suppliers, STE energy is able to offer its customers the right technological solution with the best performance, product reliability and general cost-efficiency for the solution ...
-
Manufactured by Marelli Motori S.p.Abased in ITALY
An induction machine is capable to work as a motor or as a generator depending on the rotating speed. Below the synchronous speed the machine will act as a motor. At synchronous speed, the line supplies reactive power and machine losses, but no torque or power is generated. Above the synchronous speed the machine act as a generator. Induction generators works in the stable region between the ...
-
Manufactured by Marelli Motori S.p.Abased in ITALY
Applicable standards: Generators are designed in compliance with:, IEC EN 60034 - 1, BS 4999 - 5000, VDE 0530, NF 51 - 100, NF 51 - 111, OVE M - 10 NEMA MG 1.32, Generators conform to EU rules. UL/CSA certifications available on ...
-
Manufactured by Gilbert Gilkes & Gordon Ltdbased in UNITED KINGDOM
The Turgo Impulse turbine was developed by Gilkes to be a simple impulse type machine with a higher specific speed than a Pelton. The design therefore allows a larger jet of water to be directed at an angle onto the ...
-
Manufactured by ESPE Groupbased in ITALY
The hydraulic turbine is a machine that turns hydraulic energy into mechanical energy, with a conversion yield of approximately 90%. This mechanical energy is then converted into electrical energy by means of an alternator. ESPE turbines are directly engineered by our R&D Department. ESPE manages, checks and supervises the entire production process to provide highly customised and high yield- ...
-
Manufactured by Alstombased in FRANCE
All of our medium and large hydro generators (> 50 MVA) feature oblique elements. This mechanical design principle allows perfect concentricity and circularity of all generator components under any operating condition. Furthermore, it reduces the thermo-mechanical stresses on the generator structure, which contributes to an improved reliability and ...
-
Manufactured by Gamesa Electricbased in SPAIN
The hydroelectric sector is characterised by a high level of customisation, as each power station must be optimised according to the hydroelectric resource available and the configuration of the installation. ...
-
Manufactured by Tenmat ltdbased in UNITED KINGDOM
FEROFORM T814 is a composite material made from woven fibre bonded with resin with PTFE as a friction ...
-
Manufactured by Piedmont Hydro Technologies LLC. (PHT)based in USA
PHT specializes in small hydro control systems. We integrate commercially available components from trusted names, with custom software and programming specific to each plant, to provide reliable, cost-effective solutions. Standard features reduce cost and save time, while ensuring all aspects of your plant work together for optimal results, from under 100kW, to over 10 MW. PHT’s proven PLC ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you