Francis Runner Equipment
-
Manufactured by DynaVec ASbased in NORWAY
Innovative solution with exchangeable vanes allowing for fully hard-coated runners (HVOF), even for small sizes. The DynaVec Francis runner consists of separate crown, band and the optimal number of vanes that are bolted together instead of welded as for a traditional runner. This gives the opportunity to a fully hard coating of ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Forging could considerably improve metal’s organizational structure and mechanical property. Forging offers uniformity of composition and structure. Forging results in metallurgical recrystalisation and grain refinement as a result of the thermal cycle and deformation process. This strengthens the resulting steel product particularly in terms of impact and shear strength. Forged steel is ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis Turbine Runner is consisted of Crown, Band and Vanes which featured by hydraulic ...
-
Manufactured by Hydro Power Plant SAS (HPP)based in FRANCE
Designed for Heads from 20 m to 400 m, HPP Francis runners can achieve more than 94% ...
-
Manufactured by Kössler - Voith Hydrobased in AUSTRIA
Our range of Francis turbines includes open flume type turbines for low head, and spiral case turbines in horizontal or vertical designs for medium to high head. The Francis runner is often fitted directly to the generator shaft, which also ensures a compact construction and low maintenance. Francis turbines are characterised by ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Francis turbine is characterized by a fixed-blade Francis runner that is hydraulically optimized for a narrow operating range. Traditionally, Francis turbine has been considered to be a simple and robust machine suitable for exploitation of water energy at a wide range of head, from 30 m up to ...
-
Manufactured by Harbin Electric Machinery Company Limitedbased in CHINA
The types of hydro turbines we produced include: Francis, Kaplan, Bulb, Pump-Storage, Deriaz, Pelton and Huge Pump. The max dia of runner for Francis and Kaplan are 10.4m and the producing technology reaches to an international advanced level. The types of hydro turbines we produced include: Francis, Kaplan, Bulb, Pump-Storage, ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
The key Double Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, among ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water heads. This feature makes the Francis turbine type a widely used one around the world. The key Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water heads. This feature makes the Francis turbine type a widely used one around the world. The key Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Kaplan Turbine is suitable for medium & low water head and large flow power plants. With same water head, the Kaplan runner speed is higher than that of the Francis'. The Kaplan runner blade can be either fixed and rotatory. The key components include: Kaplan runner, Distributor, Main shaft, Main shaft seal, Turbine guide ...
-
Manufactured by Flame Spray SpAbased in ITALY
wear on critical components, such as needle valves and runners for Pelton turbines, and blades and runners for Francis turbines. The most appropriate solution, widely proven on several hundreds of components by Flame Spray, consists in tungsten carbide -cobalt chrome coating via ...
-
Manufactured by Nautilus LLCbased in USA
The 660 Ultra Low Head turbine (660-ULH) is a 150mm (6in) diameter Francis turbine with a bronze runner and bronze and stainless steel guide vane and gate assembly. It uses a water lubricated rubber bearing below water and heavy duty spherical roller bearings above water to support the shaft and pulley assembly. The turbine case is ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 1000 mm to 2500 mm. Head Range Up to 300 meters (1000 feet). Flow Range Up to 35 cms (1236 cfs). Power Output Up to 30 MW. Transmission Runner Assembled to Generator or Turbine ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 400 mm to 1400 mm. Head Range 15 to 300 meters (50 to 1000 feet). Flow Range 0.5 to 20 cms (18 to 706 cfs). Power Output 100 kW to 12 MW. Transmission Runner Assembled to Generator or Turbine ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
We supply Francis-turbines up to a 20 MW per unit. For medium head applications with medium flow. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary ...
-
Manufactured by Nautilus LLCbased in USA
The regulated CMC Ultra Low Head turbine (CMC-ULH) operates in a similar power range as the 660-ULH in an open flume and produces up to 1500 watts. The CMC offers better part gate regulation and efficiency than the other cylinder gate Nautilus ...
-
Manufactured by Nautilus LLCbased in USA
The Nautilus CMC Medium Head (CMC-MH) style turbine has been produced in the U.S. since the early 1900’s. This simple regulated Francis turbine is designed for heads of 3m to 12m and develops a maximum electrical output from 1,900 watts to 9.2 kw, depending on available ...
-
Manufactured by Nautilus LLCbased in USA
environments, where it is not possible to drain the pit, an optional cylinder gate is installed to shut down the turbine. This is an external cylinder and it helps to clean leaves and debris from the turbine when opened and closed. Like the CMC-ULH, the T-ULH is designed with runner passageways that are larger than the guide vane openings to avoid ...
-
Manufactured by Canadian Hydro Components Ltd. (CHC)based in CANADA
Francis turbines have been around for 170 years, and have more installations than any other type of turbine in the world today. Numerous designs offering variations in runner height, crown and band diameters, number of buckets, etc make Francis turbines a versatile option for a wide range of hydro projects with heads as low as 12 meters to as ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you