Francis Turbine Equipment
-
Manufactured by Hydrohrom, s.r.o.based in CZECH REPUBLIC
They are designed for heads from 20 up to 100 m. With both horizontal or vertical shaft arrangement and only with direct connection to the generator. Turbine either has its own shaft support, or the runner is directly on the shaft of ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water heads. This feature makes the Francis turbine type a widely used one around the world. The key Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, ...
-
Manufactured by Hydro Power Plant SAS (HPP)based in FRANCE
Designed for Heads from 20 m to 400 m, HPP Francis runners can achieve more than 94% ...
-
Manufactured by StrojÃrny Brno, a.s.based in CZECH REPUBLIC
Francis turbine is applied for middle/ high Heads and moderate/high Discharges We design our Francis turbines with adjustable Guide Vanes during operation ensuring optimisation of efficiency at varying ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbine could be designed for the hydropower resource with various heads ranged from 10m to 500m . The water pass the runner vanes gathered in radiation and flow out in axial finally. It is recommended for the plant with flexible heads and ...
-
Manufactured by Wasserkraft Volk AGbased in GERMANY
Operators can do almost nothing wrong when having this flexible turbine with the highest peak efficiency. Designed for water heads of up to approx. 300 m and power outputs of up to around 35 MW per ...
-
Manufactured by Hydroalp S.r.l.based in ITALY
Hydroalp installs Francis turbines for medium head plants from a few tens of meters up to about one hundred meters, with flow rates from a few tens of liters up to a few cubic meters per second. Francis turbines are the most efficient turbines available. On the other hand, their operating capacity is limited with ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbine could be designed for the hydropower resource with various heads ranged from 10m to 500m . The water pass the runner vanes gathered in radiation and flow out in axial finally. It is recommended for the plant with flexible heads and ...
-
Manufactured by Hidropower d.o.o.based in SLOVENIA
High peak efficiency Francis turbines for low head and spiral case turbines for medium to high head can be provided ...
-
Manufactured by HydroTech Engineering, LLCbased in USA
HTE Engineering and its partners have provided hundreds of Francis turbines all over the world, ranging in size from 145 kW to 750 MW. The Francis turbine is a type of inward-flowing reaction turbine. This turbine is named after James B. Francis (1815 – 1892), an American ...
-
Manufactured by Zeco Di Zerbaro & Costa & C. S.r.lbased in ITALY
Reliable turbine for medium hydraulic head and flow rates. High efficiency due to the possibility of regulating wicket gate according to the available flow rate. Supplied with runner directly hanged over to the generator shaft for a compact solution, wired on a single frame, ready to be installed downstream of the penstock and started ...
-
Manufactured by Ganz Engineering and Energetics-machinery Manufacturer Ltdbased in HUNGARY
The turbines are characterized by a simple, robust design that ensures reliable operation with minimal maintenance. The welded steel-structured spiral housing and the stay ring form a compact unit with the suction-pressure connections and the support legs, and the lifting tabs. This design provides a circular symmetrical flow to the ...
-
Manufactured by Suneco Micro Hydro Powerbased in CHINA
Francis turbine is a reaction turbine,is the most common water turbine in use today. Applicable water head 30m~700m. Specific speed:50~300rpm. The largest capacity of our single Francis turbine unit is 6000KW. Head range up to more than 300 m. Capacity up to about 20 000 kW. Excellent peak ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Francis turbine is characterized by a fixed-blade Francis runner that is hydraulically optimized for a narrow operating range. Traditionally, Francis turbine has been considered to be a simple and robust machine suitable for exploitation of water energy at a wide range of head, ...
-
Manufactured by Kirloskar Brothers Limited (KBL)based in INDIA
Francis turbines are inward-flow reaction turbines that combine radial and axial flow concepts. The Francis turbine contributes about 60% of the global hydropower capacity as it can work consistently under a wide range of operating conditions. KBL Francis turbines have the widest ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 400 mm to 1400 mm. Head Range 15 to 300 meters (50 to 1000 feet). Flow Range 0.5 to 20 cms (18 to 706 cfs). Power Output 100 kW to 12 MW. Transmission Runner Assembled to Generator or Turbine ...
-
Manufactured by Mavel a.s.based in CZECH REPUBLIC
Runner Diameters 1000 mm to 2500 mm. Head Range Up to 300 meters (1000 feet). Flow Range Up to 35 cms (1236 cfs). Power Output Up to 30 MW. Transmission Runner Assembled to Generator or Turbine ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
The key Double Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, among ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis Turbine Runner is consisted of Crown, Band and Vanes which featured by hydraulic ...
-
Manufactured by Rössl & Duso S.R.L.based in ITALY
Distributor Francis Turbine Ext. Diam. 3.000 mm. Height 2.000 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you