Only show results available in Virginia? Ok

Fuel Analyser equipment

  • CloudPoint - Model CP - Fuel Analyser

    Determines the lowest temperature at which a fuel may be used without wax formation. Cloud Point combines icon scientific’s innovative analytical engine into a next-generation analyser designed to deliver maximum performance.

    By Icon Scientific Limited based in Bath, UNITED KINGDOM. from Downstream Product line

  • FreezePoint - Model FP - Fuel Analyser

    Measures the lowest temperature at which selected fuels form a flammable vapour mixture with air. Flash Point enables you to determine safe temperatures for the storage and transportation of petroleum products.

    By Icon Scientific Limited based in Bath, UNITED KINGDOM. from Downstream Product line

  • Premium

    Lancom - Model 200 - Monitor Fuel Additive Performance In Oil/Coal Fired Boilers

    It is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Portable Gas Analysers Product line

  • UniSort - Analyser

    Increasingly, customers are demanding continuous real-time analysis of the materials being used in the production of substitute fuels (SF) for thermal recovery. Many common sampling methods and subsequent analyses used in practice in today’s laboratories have very high costs.

    By Steinert Elektromagnetbau GmbH based in Köln, GERMANY. from UniSort Product line

  • Biomass Processing and Handling System

    Biomass Processing Facilities: Walk-in trailer for biomass hauling and temporary storage, Batch autoclave that operates up to 2200 psi, 7.5-ton/day coal or biomass continuous process development unit, Complete fuel-handling, crushing, shredding, and chipping preparation facilities for developing and testing process methods for fuel preparation.

    By Energy & Environmental Research Center (EERC) based in Grand Forks, NORTH DAKOTA (USA). from Fuel Preparation Product line

  • MiniScan - Model IRXpert - Gasoline Diesel and Jet Fuel Analyzer

    The MINISCAN IRXpert is the first completely portable multi-fuel analyzer for Gasoline, Diesel, Jet Fuel and Biofuel Blends, which uses the advantages of full spectrum information and full spectrum comparison for utmost measurement accuracy. More than 70 fuel parameters are accurately determined by scanning the complete spectrum with superior ...

    By Grabner Instruments Messtechnik GmbH based in Wien, AUSTRIA. from Fuel Analysis Product line

  • Inray - Fuel - Solid Fuel Quality Control System

    INRAY FUEL continuously measures the quality of solid fuels using X-ray technology. The system produces real-time fuel quality data that can be utilized in e.g. fuel pricing and process optimization. The system is ideal for medium-sized and large power plants, fuel suppliers, and bio-refineries who wish to improve their production.

    By Inray Oy Ltd based in Mikkeli, FINLAND.

  • Solid Organic Fuels

    Wood is the most important bio energy carrier. Heating with wood has a long history and there are many different types of wood-burning appliances in use. About every fourth household in Germany is heating with wood. Every year approximately 38 million cubic meters used wood in the form of firewood, wood chips, pellets and briquettes in a total of ...

    By Biomass and Bioenergy Consulting based in Gülzow, GERMANY.

  • MBP - Biofuel

    MBP biofuels and bioliquids are carbon neutral and cost efficient alternatives to mineral oil based heavy fuels, light fuels as well as diesel.

    By MBP Trading SA based in Neuchâtel, SWITZERLAND.

  • ÖKOTHERM - Model 49 kW – 950 kW - Compact Biomass Heating Systems

    Furnace and boiler. Electronic control. Fully automatic fuel feed system, ignition and deashing. Flue gas cleaning systems

    By A.P. Bioenergietechnik GmbH based in Hirschau, GERMANY.

  • Solar Thermal Add-Ons/Combined Systems

    The principle of solar thermal add-ons combines a solar thermal collector field with an already-existing conventional power plant. The fuel of the power plant could also be provided by another renewable energy source (like biomass) or even nuclear, but the highest potential for these applications exists in installations using fossil fuels such as ...

    By Sustainable Heat & Power Europe GmbH based in Grabow, GERMANY. from Solar Thermal Power Plants Product line

  • Energy Efficient Systems

    The demand to optimise energy systems producing either heat or electricity or other fuel is high. The following systems are efficient (>80%) and enhance the performance of other renewable systems.

    By Thames Renewables based in Hampton, UNITED KINGDOM.

  • Biogas & Utilising Biogas Pants

    Landfill gases: The biodegradable waste in a landfill creates methane and carbon dioxide. The gases damage the atmosphere and must therefore be collected securely. This also reduces the smell nuisance. The landfill gas treatment plant measures and analyses the gases, removes condensation water and has at least a torch burner for the disposal of ...

    By Econet Ltd based in Helsinki, FINLAND. from Sludge Treatment and Biogas Product line

  • Model CHP & KomBiCon - Combined Heat and Power Plant (CHP)

    A combined heat and power plant (CHP) is a modular system for generating electrical energy and heat, which uses the principle of power-heat coupling. Here are two different concepts of combustion engines available: dual-fuel or gas engines.

    By Biogas-Ost Unternehmensgruppe based in Gehaus, GERMANY. from System Components Product line

  • LEMAG PREMET online - Electronic Cylinder Pressure Indicators

    The LEMAG PREMETonlinesystem is able to monitor and record the cylinder pressures of all cylinders of an engine permanently and in parallel. All data, e.g. Mean Indicated Pressure (MIP), maximum cylinder pressure, indicated power (KW/hp), torsional vibration and expansion pressure, is transferred to and displayed on a rugged industrial computer ...

    By Chris-Marine AB based in Malmö, SWEDEN. from Electronic Cylinder Pressure Indicators Product line

  • Solid Biofuels

    BIOENERGY 2020+ undertakes a variety of activities in order to estimate the resource potential of solid biofuels as well as to assess the fuel with respect to technological, ecological and economic aspects. In the field of raw material supply and logistics, BE2020+ deals with the assessment, development and optimisation of the entire resource ...

    By BIOENERGY 2020+ GmbH based in Graz, AUSTRIA. from Combustion Product line

  • MSI - Tidal & Hydro Turbines

    As the world shifts its energy supply from fossil fuels to renewable sources, many innovators are looking to capture the kinetic energy of water in tidal currents and river flows.  While the technology is substantially less developed than that associated with wind power, the first large-scale experimental fixtures have recently been deployed ...

    By Mechanical Solutions Inc. Testing & Troubleshooting based in Whippany, NEW JERSEY (USA).

  • Pelton Hydro Turbines

    Pelton turbines can operate under a wide range of heads, from 200 to 1,800 meters.Based on our experience in the field, we offer vertical shaft machines that are equipped with multi-jet collectors up to an output of about 350 MW, and with runner diameters up to 4 m.For smaller units, we provide horizontal shaft single or double runner Pelton ...

    By Alstom based in Levallois-Perret Cedex, FRANCE. from Hydro Turbines Product line

  • Vocgen - Gas Turbine Power Generators

    VOCGEN by Environment & Power Systems International are small scale, highly robust simple cycle industrial gas turbine power generators that cogenerate 0.560 MW(e) output power and an average 6.5MMBtu/hr high quality heat energy. When configured in combined heat and power (CHP) and VOC abatement applications, VOCGEN can achieve overall system ...

    By Environment & Power Systems International based in Tucson, ARIZONA (USA).

  • Ligento - Biomass Cogeneration Plants

    The production process of the modern plants of the Ligento® green power GmbH is based on power-heat cogeneration. Heat and electricity are produced from natural and renewable resources such as wood. For this purpose, Ligentoplant converts wood chips through thermochemical processes into clean, energy-rich generator gas. This gas is then burnt ...

    By Ligento green power GmbH based in Nuremberg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you