Only show results available in Virginia? Ok

Fuel Cell Monitoring equipment

  • CVM-System MCM IntelliProbe - Fuel Cell Monitoring at cryogenic temperatures

    The application of measurement technology within climate chambers makes high demands on the inserted components. The measurement modules (MCM IntelliProbe) and the process module (MCM-MasterModule) are housed in a heated aluminum body. This allows the reliable use of monitoring equipment at temperatures down to -40 °C. The internal heating ...

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • Fuel Cell Voltage Monitoring System

    A security system for a stackable fuel cell, with which 40 cell voltages, at the most, can be measured. Working: For experiments, carried out with fuel cells (stacks), it is necessary to measure all cell voltages; in case one of the cell voltages decreases below a certain level, the supervisory system has to be able to intervene, based on this ...

    By Energy research Centre of the Netherlands (ECN) based in Petten, NETHERLANDS.

  • PowerCell - Model S1 - Fuel Cell Stack

    PowerCell S1 is developed to run either with reformate fuel or pure hydrogen. It is used in applications such as telecom back-up, small generators and stationary power-generation from hydrogen and natural gas as well as biogas. PowerCell S1 is delivered globally, for example to the US, Germany, France, Taiwan, China, South Korea, and Sweden.

    By PowerCell Sweden AB based in Gothenburg, SWEDEN. from Fuel Cell Stacks Product line

  • PM - Model S25 - Hydrogen Energy System

    The PM Module S25 in the standard 19″ frame is designed for stationary use. PM Module S25 is developed by Proton Motor contains the PM 400 stack and includes the necessary balance of plant. As a result of the compact system architecture, the PM Module S25 can be integrated into any customer application.

    By Proton Motor based in Puchheim, GERMANY. from OEM Fuel Cell Products Product line

  • Model CVM1 - Cell Voltage Monitor

    Available for use to monitor voltages for either battery systems or fuel cells. This device provides a low overall cost, high speed system for measuring high quantities of voltages. Each system is capable of measuring 32 channels of isolated Analog Inputs at up to 5 kHz and a 16-bit (63 uV) resolution. The very low power (<2.5 W) means it can ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Cell Voltage Monitor Product line

  • Cell Voltage Monitor (CVM)

    Available for use to monitor voltages for either battery systems or fuel cells. This device provides a low overall cost, high speed system for measuring high quantities of voltages. Each system is capable of measuring 32 channels of isolated Analog Inputs at up to 5 kHz and a 16-bit (63 uV) resolution. The very low power (2.5 W) means it can be ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Voltage Monitor Product line

  • Premium

    Lancom - Model 200 - Monitor Fuel Additive Performance In Oil/Coal Fired Boilers

    It is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.

    By AMETEK Land based in Dronfield, UNITED KINGDOM. from Portable Gas Analysers Product line

  • Serenergy - Methanol Fuel Cell Cabinets

    Serenergy develops complete solutions power supply solutions incorporating the H3-series of reformed methanol fuel cell systems and auxiliaries, such as fuel tank, power distribution and wireless communication for remote monitoring. Serenergy’s fuel cell solutions work in parallel with an external battery pack on site or installed with the ...

    By Serenergy based in Hobro, DENMARK. from Cabinets Product line

  • Model Eye FE 4 UV/IR - Multi Fuel Flame Surveillance

    Multi -Fuel Flame Surveillance. Twin Channel Monitoring with Shutter Self Check. The UV and IR Cells are incorporated into a single head assembly, reducing the number of Viewing Heads required on multi-fuel burner applications. Both signal sources are passed from the Viewing Head to the Head Transmitter where they are conditioned into a single ...

    By Credfeld Ltd based in Fareham, UNITED KINGDOM. from Main Flame Monitoring Product line

  • Model 305 - Modular Fuel Cell System

    Designed around Intelligent Energy’s patented modular fuel cell architecture, the 305 fuel cell system provides our partners with an efficient and reliable solution to maintain their critical power systems 24/7. The Intelligent Energy 305 system utilises the latest hydrogen fuelled, proton exchange membrane (PEM) fuel cell technology and is ...

    By Intelligent Energy Limited based in Leicestershire, UNITED KINGDOM. from Distributed Power & Generation Product line

  • CVM-System MCM IntelliProbe - Voltage Monitoring System / Batteries / Fuel cells

    Multichannel voltage monitoring system for fuel cells and batteries. The system setup is modular. A complete measurement system integrates up to 42 ten-channel voltage monitoring modules, enabling users to concurrently acquire the voltages of 420 channels, a link module to connect to supply and communications lines. The last measurement module in ...

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • MCM-IntelliProbe U 10 - Cell Voltage Monitoring Module

    Ultra-compact 10-channel voltage measurement module with direct-mount attachment for a galvanically isolated voltage logging in groups of battery, fuel cell or electrolysis stacks with the following technical specification (excerpt): - Dimensions (WxHxL mm) 10.5 x 30 x 100 without guiding pins and bus connectors. - 10 measuring channels available ...

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • Fuel Cell System for Solar-Powered Airplane

    In 1998 AeroVironment began working under contract to NASA to produce a fuel cell system for Helios, the 247-foot wingspan solar-powered airplane. The proton exchange membrane (PEM) fuel cell system would enable Helios to fly for six months continuously. As a result of the NASA work, AeroVironment acquired expertise designing the balance-of-plant, ...

    By Aerovironment Corporate based in Monrovia, CALIFORNIA (USA). from Innovative Concepts & Solutions Overview Product line

  • CVM-System MCM IntelliProbe - Model MCM IntelliProbe - Cell Voltage Monitoring / Test Bench Equipment

    Plug 'n Play fuel cell monitoring system for test bench environments. The measurement modules (MCM-IntelliProbe) and the process module (MCM-MasterModule) are housed within a 19'-rack, which allows simple integration or removal. Thus, the cell voltage monitoring units (CVM) can be exchanged between the FMI in any order. The connection of the ...

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • Liquid Fuel Systems

    ICC has developed an innovative and simplified approach with the Fischer-Tropsch process that uses a sub-stoichiometric condition where the Hydrogen to Carbon monoxide ratio Is matched to the Anode exhaust of the Fuel Cell Energy methane powered fuel cell system. The ICC ftENERGY process will produce the equivalent of 4400L of fuel and wax each ...

    By International Composting Corporation (ICC Group) based in Victoria, BRITISH COLUMBIA (CANADA).

  • Powertech - Hydrogen Fueling Stations

    Powertech has designed and constructed modular compressed hydrogen fueling stations.  These stations are able to fill 700 bar (70 MPa) fuel cell vehicles in accordance with SAE J2601 fueling protocols.  Communication fills and -40˚C pre-cooling are features of our design.  The containerized assemblies allow for the easy ...

    By Powertech Labs, Inc. based in Surrey, BRITISH COLUMBIA (CANADA).

  • Pure Energy Centre - Hydrogen Fueling Station

    The Pure Energy Centre supplies and deploys hydrogen fueling station to support you in dispensing hydrogen into your personal or public hydrogen fuel cell vehicles. We deploy and operate fast hydrogen fueling stations with safety and reliable in mind. Our aim is to accompany you in delivering zero emission vehicles. 50 bar, 100 bar, ...

    By Pure Energy Centre based in Baltasound Unst, UNITED KINGDOM. from Hydrogen Products Product line

  • CONEFIRE - Model GB - Multi Fuel Burner/Process Burner

    Gas or multi fuel burner for process heating or drying processes, Capacity range from 125 – 4.000 kW, Fuel turn down gas up to 1 : 50, Fuel turn down oil up to 1 : 10, Flame monitoring by uv cell, ionization possible, Low air pressure demand, Modular design, Adaptable mixing unit, Fuel lances for gas, oil, gas oil or other gaseous or liquid ...

    By IBS Industrie-Brenner-Systeme GmbH based in Hagen, GERMANY. from Industrial Burners Product line

  • MCM-IntelliProbe-U10T - Voltage Monitoring Module

    Ultra-compact 10-channel voltage measurement module with integrated bus termination and direct-mount attachment for a galvanically isolated voltage logging in groups of battery, fuel cell or electrolysis stacks with the following technical specification (excerpt): - Dimensions (WxHxL mm) 10.5 x 30 x 100 without guiding pins and bus connectors. - ...

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • NI - Model 9225 - 3-Channel, 300 Vrms Analog Input Module

    The NI‑9225 performs differential analog input. The wide measurement range is well suited for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed simultaneous sampling. In addition, you ...

    By National Instruments based in Austin, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you