Fuel Cell Testing Equipment
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Single-cell testing is a great tool for the research and development of materials for fuel cells. Well-defined and repeatable conditions of Leancat PBT enable benchmarking of fuel cells also thanks to extensive scripting ...
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Research and development of solid oxide fuel cells poses specific requirements to the testing equipment, as it must operate at high temperatures. Leancat STS-10 satisfies all requirements of SOFC testing with the ability to preheat inlet gases and extensive scripting ...
-
Manufactured by LEANCAT s.r.o.based in CZECH REPUBLIC
Ideally suited for research and development of large-area single cells or verification of stack design on short-stack level. Well-defined and repeatable conditions of Leancat PTS-10 enable benchmarking of fuel cells also thanks to extensive scripting ...
-
Manufactured by Greenlight Innovationbased in CANADA
The G20 is an economical complement to our PEM test product line with expanded capability in low power fuel cell characterization. The G20 has been designed for small active area, single cell R&D and R & D testing—with all the capability and sophistication of our larger test ...
-
Manufactured by Fuel Cell Technologies. Inc.based in MEXICO
Mini-Test Station for low current fuel cell testing. The Mini Test Station has no software and is designed to be used with the customers' Potentiostat as a load and all the data is recorded by that unit. The test station includes Analog mass flow controllers for Anode and Cathode gas streams, ...
-
Manufactured by Hephas Energy Corporationbased in TAIWAN
HephaStation series are complete development and testing programs for short / long fuel stacks (5 ~ 300kW). HS station has accurate temperature, humidity, automatic pressure control and grid-connected electronic load. The equipment can monitor the partial voltage of the stack above 600chs, and observe the temperature and ...
-
Manufactured by Nexcerisbased in USA
Our nickel ink is an excellent contact paste for SOFC testing, and is especially good for enhancing the electrical contact on the anode side of a cell during fuel cell testing. The nickel ink can also be used as a reference electrode, but any electrical testing with the nickel paste will require ...
-
Manufactured by Fuel Cell Materials, Division of Nexceris Companybased in USA
The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...
-
Manufactured by Fuel Cell Materials, Division of Nexceris Companybased in USA
The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...
-
Manufactured by Smart Testsolutions GmbHbased in GERMANY
System that allows developers to test fuel cell control systems based on SIMATIC S7 without requiring a real fuel cell. The test system is based on the Hardware-in-the-Loop-principle – the voltages of the fuel cell stack als well as all relevant ...
-
based in USA
The NI‑9225 performs differential analog input. The wide measurement range is well suited for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed ...
-
Manufactured by Intepro Systems America, LPbased in USA
products. These loads are rated from 150 watts to 6000 watts. Typical applications that these model EL9700 series loads can be used for include research & development, production, solar cell loading, fuel cell testing and incoming ...
-
Manufactured by GasHub Technology Pte Ltd.based in SINGAPORE
GasHub’s GH 600 WEL & GH 1000 WEL are models for operation with fuel cell test stations, or as a source of clean-burning fuel for flame tooks and many others. Proton Exchange Membrane technology is employed as the electrolyte for water electrolysis, which features low power consumption, rapid startup and high pure gas ...
-
Manufactured by AVL List GmbHbased in AUSTRIA
During fuel cell system testing or development, an accurate, reliable and measurable supply of hydrogen is vital. With components resistant to hydrogen embrittlement, any delivery system must provide the fuel gas at the correct pressure and prevent emissions that could contaminate the stack catalyst. At AVL we have developed an ...
-
based in GERMANY
Modular test systems for fuel cell technology: With test systems, made by KRATZER AUTOMATION you will gain the benefit of having a solution which will allow you to carry out multiple tasks in the field of proving and testing of fuel cell technology for vehicle ...
-
Manufactured by Kolibrik.netbased in CZECH REPUBLIC
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM64H module is ideal for ...
-
Distributed by Robert Bosch Manufacturing Solutions GmbHbased in GERMANY
Regarding stationary fuel cells we are your industrialization partner for SOFC (Solid Oxid Fuel Cell) systems. We offer testing solutions for development and production of SOFC cell stacks. Our full stack and short stack test benches are designed for function ...
-
Distributed by Robert Bosch Manufacturing Solutions GmbHbased in GERMANY
For manufacturers as well as for users of PEM (Proton Exchange Membran) Fuel Cells moehwald offers testing solutions for: PEM Fuel Cell stacks (short- and full-stacks in various power ranges from 5kW up to > 160 kW) PEM Fuel Cell systems in different designs and power ranges ...
-
Manufactured by Kolibrik.netbased in CZECH REPUBLIC
Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. CVM24P module is ideal for ...
-
Manufactured by Hephas Energy Corporationbased in TAIWAN
HTS series are fuel cell membrane electrode (MEA) test and evaluation equipment. HTS station have temperature, humidity and pressure control systems, combined with fuel cell low voltage and high current power generation. It is used for MEA polarization curve analysis, endurance analysis, and pressure ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you