Refine by
Fuels And Lubricants Testing Instruments Equipment & Supplies
20 equipment items found
Manufactured by:PCS Instruments based inLondon, UNITED KINGDOM
Peak Hertzian contact pressures typically range from 1.8 GPa in gears and cams to 3.5 GPa in rolling bearings and toroidal traction drives. The PCS-ETM enables tribological phenomena to be studied over the full range of ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell stack without the need to integrate a real stack into ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
With test systems for Fuel Cell Control Units (FCCUs), developers can test the electronic components of fuel cell or battery systems without needing a real system. An essential component of the systems we develop for our customers is therefore cell voltage simulation (CVS). In addition to the cell voltages, the relevant environmental parameters are also ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model F-1/F-2 Combination CFR engine is used to determine the octane quality of gasoline and fuel blending components. This unit is recognized and approved by ASTM D2699 and D2700. This unit is equipped with a heavy duty CFR-48D type crankcase, variable compression cylinder, carburetor with adjustable fuel to air ratio, and knock measurement ...
Manufactured by:Camda Generator Work Co., Ltd based inDongguan, CHINA
Camda H Series is a an excellent type in the family of Camda"s gas generator sets. It is developed by Camda in cooperation with Cummins China, who authorize only Camda to convert its protype engine into gas engines. Fueled by biogas and natural gas, the capacity ranges from 24Kw to 500Kw. It has now been widely accepted in the globe, in operation in such countries as UK, France, Germany, Sweden, ...
Manufactured by:Camda Generator Work Co., Ltd based inDongguan, CHINA
Camda H Series is a an excellent type in the family of Camda"s gas generator sets. It is developed by Camda in cooperation with Cummins China, who authorize only Camda to convert its protype engine into gas engines. Fueled by biogas and natural gas, the capacity ranges from 24Kw to 500Kw. It has now been widely accepted in the globe, in operation in such countries as UK, France, Germany, Sweden, ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model F-5 CFR engine is a complete system for diesel fuel cetane number determination, conforming to ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil. This method is accepted worldwide as the standard for determining the ignition quality of diesel ...
Manufactured by:Twin Heat A/S based inGedsted, DENMARK
The ME system must be connected to an external silo via an auger conveyor. The boiler and burner are identical to types M and MCS, but the cell lock is replaced by a small fuel storage with an automatic gate on which the auger conveyor is connected. The storage is refilled by the auger conveyor which operates as and when ...
by:Kratzer Automation Test Systems based inUnterschleißheim, GERMANY
Modular test systems for fuel cell technology: With test systems, made by KRATZER AUTOMATION you will gain the benefit of having a solution which will allow you to carry out multiple tasks in the field of proving and testing of fuel cell technology for vehicle ...
Distributed by:Robert Bosch Manufacturing Solutions GmbH based inStuttgart, GERMANY
For manufacturers as well as for users of PEM (Proton Exchange Membran) Fuel Cells moehwald offers testing solutions for: PEM Fuel Cell stacks (short- and full-stacks in various power ranges from 5kW up to > 160 kW) PEM Fuel Cell systems in different designs and power ranges (from 30kW up to >300 kW, single system up to triple-box systems) moehwald provides reliable and high accurate ...
Manufactured by:GREGORY Technology GmbH based inWiesbaden, GERMANY
As an extended complete system on the basis of the sensor S8005C in combination with the heat exchanger HE8005 it is for engines with fuel supply to the engine and fuel return back to the tank. Extending the sensor with the optional heat exchange unit flowtronic HE8005 enables the system to operate also with engines which have a fuel supply system with fuel return back to the tank. In addition ...
Manufactured by:DC Scientific Glass, Inc. based inGlen Burnie, MARYLAND (USA)
AD Systems developed a new jet fuel thermal oxidation test rig (TO10) that ensures perfect fuel preparation, perfect fuel flow control, a perfect heater tube temperature profile and perfect thermal deposit quantification with the Deposit Rater – ...
Manufactured by:AVL List GmbH based inGraz, AUSTRIA
During fuel cell system testing or development, an accurate, reliable and measurable supply of hydrogen is vital. With components resistant to hydrogen embrittlement, any delivery system must provide the fuel gas at the correct pressure and prevent emissions that could contaminate the stack catalyst. At AVL we have developed an answer to this challenge. We have named it AVL ...
Manufactured by:DESMI A/S based inNoerresundby, DENMARK
Fuel transfer tank to tank, tank to vehicle or tank to aircraft including on board marine systems can be covered by our extensive range of transfer pumps with or without filtration ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model FIT (Fuel Ignition Tester) is a desktop analyzer designed to rate derived cetane number. The FIT conforms to ASTM D7170 and IP method #PM-DI-05 to provide automated analysis of diesel fuel DCN. The analyzer is easy to use, compact and robust with a simple computerized operator interface. Maintenance of the FIT is ...
Manufactured by:Schaeffer Manufacturing Co. based inSt. Louis, MONTANA (USA)
Extreme pressures and temperatures in high-pressure common rail fuel injection systems are creating an all too familiar problem: plugged fuel filters and foul ...
Manufactured by:Intelligent Energy (IE) based inLoughborough, UNITED KINGDOM
IE-DRIVE 100 is designed to meet the performance and space constraints of passenger and light commercial fuel cell powered vehicles (LCV), providing peak power up to 110kW in a compact, engine shaped format. The hydrogen fuel cell module and surrounding system has been designed specifically for integration into fuel cell powered vehicles, including cars or LCVs, replacing an existing fossil fuel ...
Manufactured by:CFR Engines Canada ULC based inOttawa, ONTARIO (CANADA)
The IQT-XLM Model is an advanced system designed for comprehensive testing and certification of diesel fuels and their alternative counterparts. Developed by CFR Engines Inc., this instrument incorporates a Constant Volume Combustion Chamber (CVCC) and has been a reliable tool since 1998 for refineries and laboratories worldwide. The IQT-XLM combines the capabilities of previous IQT models into a ...