Gas Assisted Flare Equipment
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased ...
-
Manufactured by MRW Technologies, Inc.based in USA
Gas-assisted flares mix fuel gas with the waste gas for applications requiring smokeless operation. Our flare tips can be engineered to mix this fuel gas with both high and low-pressure waste gas streams. MRW can supply these ...
-
Manufactured by Europem N.Vbased in BELGIUM
Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
Advanced Energy's E2T Quasar M8100 series instruments provide continuous monitoring and detection of flare stack pilot (PM), smoke (SM), and flares (FM). Flame detection up to 400 m away. Detection of hydrocarbon and hydrogen flames. CSA/US and ATEX explosion-proof housing. Automatic gain control for adverse weather conditions. Modular ...
-
Manufactured by MRW Technologies, Inc.based in USA
Horizontal pit flares designed and built by MRW are often a more economical alternative to vertical flares of the same type (see utility, air-assist smokeless, steam-assist smokeless, or gas-assist smokeless flares). These flares provide easier access to the ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT designs and builds stainless steel air-assist and gas-assist mobile flares in several sizes – 2” to 6”. Our flares can be configured with blowers, knock-out drums, and flow meters for a variety of applications and are designed to set up on site in under 30 minutes. This picture shows a ...
-
Manufactured by MRW Technologies, Inc.based in USA
An effective method for achieving smokeless flare operation is to use an air-assisted flare where forced air is mixed with the waste gas. MRW has air-assisted flares operating successfully at loading terminals, landfills, ethanol plants, chemical & petrochemical facilities, oil & ...
-
Manufactured by MRW Technologies, Inc.based in USA
Designed for vapors from PRODUCED OIL OR WATER TANKS as well as PRODUCED GAS, MRW Non-Assist Smokeless Flares don't require forced air for smokeless combustion at infinite turndown. Vapors from multiple low-pressure tanks and high pressure sources can be controlled with a single open flame system. Built to meet 40 CFR 60.18 and ...
-
Manufactured by Hilliard Emission Controls, Inc. / PURGITbased in USA
PURGIT operates a turn-key mobile flare service for sites all over the United States. Both enclosed combustors and open flares are kept in stock and ready to deploy for applications ranging from above-ground storage tank degassing to truck and railcar loading/cleaning events. Our project coordinators have over five decades of experience and ...
-
Manufactured by Hero Flare LLCbased in USA
When steam or electric is not available on-site, our high pressure gas assist or air assist technologies are viable options to achieve smokeless capacity. This technology can also be used to retrofit an existing flare stack that is experiencing smoke formation and outside of the environmental compliance ...
-
Manufactured by Airoil Flaregas Pvt. Ltd.based in INDIA
The Demountable Flare System features a derrick structure with the one or multiple flare risers, mounted in such a way as to permit the lowering of the flare burner to grade for service without the need for an expensive heavy-duty crane. Further the flare burner is lowered to grade without the need of any personnel to climb to ...
-
Manufactured by MRW Technologies, Inc.based in USA
Whether your application has low pressure or high pressure, combustible or non-combustible gas, small or large flow, MRW can offer a solution. Our systems have proven successful worldwide in industries ranging from: Gas Processing, Oil & Gas Production, Midstream, Chemical & Petrochemical, Landfill, Petroleum Refining, ...
-
Manufactured by Tornado Combustion Technologiesbased in CANADA
A flare stack refers to an elevated vertical stack used for burning off unusable waste gas in a variety of oil and gas production applications. Waste gases are either uneconomical to recover/retain, or released during planned or unplanned over-pressuring of plant equipment. Waste gases are released to the flare via piping ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Europem have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications.Europem’s extensive experience in flare design has resulted in a comprehensive range of elevated and ground ...
-
Manufactured by Europem N.Vbased in BELGIUM
Since the 1980’s, key staff of Nutara have been responsible for the design, fabrication, installation, commissioning and maintenance of numerous flare systems including some of the most stringent and demanding applications. Nutara designs are optimized towards flexibility, robustness, low emissions, high thermal efficiency and ...
-
Manufactured by Gasco Pty Ltd.based in AUSTRALIA
Flares, also known as gas flares and flare stacks, are a gas combustion device used in industrial plants such as petroleum refineries, chemical plants, and natural gas processing plants as well as at oil or gas production sites having oil wells, gas wells, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you