Gas Cleaning Equipment In USA
-
Manufactured by Biogasclean A/Sbased in DENMARK
Easy to ship worldwide; the gas cleaner can be shipped on a truck or in one 40 feet container. The PTU – the Process Technique Unit - is the machine room and contains PLC controller board, circulation pump, air blower, valves, flow meters and – if required – also gas detector system and heating system installed in a small ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
installed on a skid. The scrubber tank is manufactured in high quality fiberglass. The tank is supplied with ladder and handrail. The packing media is manufactured in plastic and shall be moved outside the tank for ...
-
Manufactured by Biogasclean A/Sbased in DENMARK
, air blower, valves, flow meters, gas detector system and – if required – also heating system installed in a custom built fiberglass container or a modified shipping ...
-
Manufactured by Jayne Products, Inc.based in USA
CONNTECT 7000 solvent based compressor cleaner for on-line & off-line use. Conntect 7000 is a concentrated solvent based gas turbine compressor cleaner designed for both ON LINE and OFF LINE cleaning. The combination of non-ionic surfactants, emulsifiers and organic solvents is specifically designed to remove deposits commonly found on ...
-
Manufactured by Jayne Products, Inc.based in USA
Methods, products, systems and service for on-line cleaning and treatment of the combustion side of boilers, process furnaces and incinerators burning gas, oil, coal, lignite and waste. Polarchem for cleaning and maintenance of process furnaces. By its flexible method for on-line cleaning Polarchem has created a useful ...
-
Manufactured by Tecogen, Inc.based in USA
The InVerde e+ module is the first and only clean natural gas engine-driven cogeneration system able to operate within the extremely low levels of regulated pollutants allowed by the distributed generation regulations for 2007 set by the California Air Resources Board (CARB). The InVerde e+ emissions not only meet but exceed the stringent ...
-
Manufactured by Frontline BioEnergy, LLCbased in USA
is not critical to its use, such as in a boiler to produce steam or in equipment that uses the hot gas to provide process heat. This technology can replace natural gas or propane fuels with biomass or waste-based solid fuels. Frontline’s gasification systems convert waste into valuable synthesis gas (syngas) and a biochar coproduct. ...
-
Manufactured by Frontline BioEnergy, LLCbased in USA
ALKOOL technology provides an alkali-free syngas while avoiding deposition and fouling normally encountered when processing feedstocks high in sodium and potassium. Removing these alkali metals protects equipment from ...
-
Manufactured by Frontline BioEnergy, LLCbased in USA
systems convert waste into valuable synthesis gas (syngas) and a biochar coproduct. Frontline BioEnergy has patented gasification technologies, the extensive know-how, and trade secret IP as ...
-
Manufactured by Jayne Products, Inc.based in USA
CONNTECT 6000 is a concentrated high performance, low foam water-based cleaner for on-line and off-line use. Field experience indicates that this non-toxic product attains cleaning efficiencies similar to solvent-based products without generating excessive foam, and any foam that is produced during cleaning quickly dissipates after ...
-
Manufactured by Jayne Products, Inc.based in USA
CONNTECT 5000 is a concentrated water based gas turbine compressor cleaner designed for both ON LINE and OFF LINE cleaning. Field experience indicates that this non-toxic product attains cleaning efficiencies similar to solvent-based cleaners. The combination of non-ionic surfactants and emulsifiers was specifically designed to remove ...
-
PremiumManufactured by HRS Heat Exchangers Ltd.based in UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
-
Manufactured by Vortex Ecological Technologies Ltd.based in ISRAEL
Wet-Vortex systems are especially efficient where the cleaning of both solid and gas pollutants is required. Solid particles, captured in the cleaning process, can be returned for reused when applicable. Furthermore, the absorption liquid used in the gas-cleaning process can be cleaned from the ...
-
Manufactured by DCL International Inc.based in CANADA
in its compact layout, DCL's SRT Systems can be delivered in a vertical package to further minimize its footprint, or horizontal for ease-of-access. With DCL's SRT System, there is no annual downtime or media changeover and less frequent maintenance required to maintain consistent and effective gas cleaning ...
-
Manufactured by Burnham RNGbased in USA
The company is focused on efforts to turn waste into valuable resources. Burnham manages and reuses organic waste and wastewater by transforming it into renewable natural gas, clean water, and high-value soil additives that enhance sustainability and profitability. Led by professionals with decades of bioenergy experience, Burnham ...
-
Manufactured by Cain Industries, Inc.based in USA
packager’s design needs. The capability of removing the core assembly without disturbing the exhaust gas connections, makes cleaning and inspecting the finned tubing fast and efficient. This is especially important when operating with fuel oil types which can foul the heating surface and require a periodic maintenance ...
-
by Waterleaubased in BELGIUM
The HELIOSOLIDS fluidized bed reactor is a fluidized bed furnace for the staged combustion of wastewater sludge, bio-solids, industrial sludge and fine solids. The reactor features integrated heat recovery, a stable fluidization and combustion process, and integrated flue gas ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
Wet process gas enters a coalescing pre-filter, then passes through the inlet valve assembly and is directed towards chamber 1 where the clean gas passes upward through the desiccant. Gas drying is doneby adsorption. Dry gas from chamber 1 outlet passes through the valve assembly and through the after-filter to ...
-
based in USA
CPC's BioMax Gasification Systems convert carbon-rich, biomass feedstocks into a clean producer gas (syngas) containing equal amounts of hydrogen and carbon monoxide, a small amount of methane, some carbon dioxide, water vapor and the balance nitrogen. CPC's proprietary gasification technology enables the producer gas stream from ...
-
Manufactured by Community Power Corporation (CPC)based in USA
The world's most advanced modular CHP gasification system. 145 kWe net. Commercially ready. Field proven. Uses no water and produces no waste water. Meets US EPA standards. Fully automated. Remote monitor and control. Operates 24x7. CPC's BioMax® Gasification Systems convert carbon-rich, biomass feedstocks into a clean producer gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you