Refine by
Gas Combined Cycle Equipment & Supplies
16 equipment items found
Manufactured by:MTR Carbon Capture based inNewark, CALIFORNIA (USA)
Membrane Technology and Research, Inc. (MTR) offers an advanced CO2 capture solution specifically designed for natural gas combined cycle (NGCC) power plants. This system utilizes a selective exhaust gas recycle (S-EGR) configuration that leverages incoming combustion air as a sweep to pre-concentrate CO2 from 4% to around 20%. ...
by:RedoxBlox based inSan Diego, ALABAMA (USA)
Our electricity-to-electricity energy storage modules enable natural gas power plants to be seamlessly transformed into renewable energy storage facilities by replacing the existing combustor in gas turbine engines. These modules range from MWh scale for micro gas turbines utilized in smart-grid applications to GWh scale for large natural ...
Manufactured by:EPT Clean Oil based inCalgary, ALBERTA (CANADA)
Rust and oxidation inhibited oils, also known as R&O Oils or Turbine oils, are designed for use in turbines, compressors and other rotating applications. Offering outstanding lubricating properties, these lubricants break down due to oxidation, creating dissolved contaminants from day one. These dissolved oil breakdown products accumulate until they saturate the oil, forming ...
Manufactured by:Braden Group based inTulsa, OKLAHOMA (USA)
Braden has designed and manufactured diverter isolators since 1985. The bulk of our diverter experience is in combined-cycle gas turbine power plants, where extreme and sudden thermal changes necessitate thorough design foresight. We have also designed diverters for desulfurization (FGD) applications with several unique and patented features for ...
Manufactured by:Dongfang Electric Corporation (DEC) based inChengdu, CHINA
Gas-fired power plants have the lowest C02 emissions of all fossil fuel-based power plants. DEC is a leading supplier of heavy-duty gas turbine and gas power integrated solutions in China. We are capable of designing, manufacturing, installing, commissioning and providing after-sales service for Gas Turbine ...
Manufactured by:Inerco based inSevilla, SPAIN
INERCO offers comprehensive and advanced energy storage solutions in the application areas of power generation (conventional and renewable), transmission, distribution and consumption. These systems allow the optimization and management of power generation sources and consumption, to ensure the grid stability and quality, deferral of infrastructure investments and to avoid electrical failures, in ...
by:Thermoflow Inc based inJacksonville, FLORIDA (USA)
GT MASTER® simulates performance of a given plant at different operating conditions, such as different ambients, loads and control set-points. A GT MASTER plant model is defined by its hardware, by contrast with a GT PRO model which is defined by the assumptions used to create the hardware. The 4,000+ inputs which define plant hardware and control set-points are all initialized upon ...
Manufactured by:Iqony GmbH based inEssen, GERMANY
They have to supply heat and power reliably – and increasingly sustainably and renewably, while ensuring a high level of availability. Cogeneration technologies, such as combined-cycle gas turbine (CCGT) power plants, the use of energy from renewable sources, the use of residual materials or waste generated in production, and the use of ...
by:Thermoflow Inc based inJacksonville, FLORIDA (USA)
PDETM (Plant Design Expert) is an intelligent shell that uses the GT PRO/GT MASTER design and simulation engines. PDE is a compact expert program, with built-in logic to create and configure suitable gas turbine power and cogeneration plants based on the user’s electricity and heat demands, site parameters, and constraints. It rapidly creates side-by-side comparisons of performance and ...
by:Calpine Corporation based inHouston, TEXAS (USA)
Combined-cycle plants integrate natural-gas-fired and steam turbines, are more efficient than simple-cycle plants and generate the most megawatts produced by Calpine's ...
Manufactured by:Maxim Power Corp. based inCalgary, ALBERTA (CANADA)
The Milner 2 (“M2”) power plant is currently a 300 MW state-of-the-art Combined Cycle Gas Turbine (“CCGT”) unit located at the HR Milner Generating Station near Grande Cache, Alberta. The M2 CCGT unit benefits from significant existing infrastructure at the brownfield site, including the existing M1 steam turbine generator ...
by:Thermoflow Inc based inJacksonville, FLORIDA (USA)
GT PRO® automates the process of creating a combined cycle or gas turbine cogeneration plant design, guiding the user to rapidly and easily attain an optimal configuration and technical parameters. The user inputs design criteria, starting with the big picture and progressing in a logical sequence into greater details. ...
Manufactured by:Royal Dahlman BV based inMaassluis, NETHERLANDS
Renewable energy, energy efficiency and energy independence are a hot topics nowadays. One energy source, with a large potential is biomass. Biomass is generally considered to be one of the most important renewable energy sources. Biomass is the only renewable carbon source! Another important energy source is waste. Land filling waste is limited and will be abolished in many regions. Mass ...
Manufactured by:Catalytic Combustion Corporation (CCC) based inBloomer, WISCONSIN (USA)
Co - Oxidation Catalyst / Natural Gas: A high performance oxidation catalyst system and carbon steel housing that can be designed and manufactured to fit all sizes of gas ...
by:ENGIE based inParis cédex 08, FRANCE
Beyond generating electricity by so-called “conventional” power plants, ENGIE operates combined cycle and cogeneration plants which use natural gas, resulting in diversified electricity production with a low level of CO2 emissions. These plants provide improved energy efficiency and help secure the power supply. Moreover, they are ...
Manufactured by:Dongturbo Electric Company Ltd. based inChengdu, CHINA
Steam turbine is a kind of rotary steam power plant. High temperature and high pressure steam passes through a fixed nozzle to become accelerated airflow and then is injected onto the blades to rotate the rotor equipped with blade rows while doing work externally. Steam turbine is the main equipment of modern thermal power plant, and is also used in metallurgical industry, chemical industry and ...