Gas Combustion Equipment
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 550P device is for the cleaning of gases and is suitable for use in conjunction with all gas measuring and analysis instruments. It is encased in a handy portable case. It is especially designed for use with the IMR 1400 and IMR 2800 series or any other type of combustion gas analyzer. The gas is filtered by the 3 micron ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 500-P is a portable A/C powered sample dryer. It can use used with any gas measuring instrument. IMR recommends pairing it with an IMR 1400 or IMR 2800 gas ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The GCU (Gas Combustion Unit) developed by SAACKE makes the safe transport of liquefied natural gas (LNG) at sea possible. It utilises surplus boil-off gas completely and with maximum ...
-
Manufactured by Hobre Analyzer Solutionsbased in NETHERLANDS
The WIM COMPAS™ adds to Hobré’s portfolio of process analyzers for (Fuel and flare gas combustion measuring) measuring the Wobbe Index, heating value (BTU) and the Combustion Air Requirement Index (CARI). Designed and manufactured in-house, the WIM COMPAS™ builds on hobré’s 20+ years of ...
-
Manufactured by Duiker Combustion Engineersbased in NETHERLANDS
The main reaction furnace is where the thermal stage of the modified Claus process takes place. In this thermal stage the majority of the sulphur recovered in the sulphur recovery unit is formed. Also impurities such as ammonia and aromatic hydrocarbons are destroyed here. The burner, naturally plays a crucial role in this through the degree of mixing achieved in the furnace as well as ...
-
Manufactured by Duiker Combustion Engineersbased in NETHERLANDS
When we consider fuel gas fired combustion equipment in the sulphur recovery unit, we can distinguish between the substoichiometric in-line re-heaters and reducing gas generators and the superstoichiometric incinerator. Some design considerations remain the same for every piece of fuel gas fired process ...
-
Manufactured by Sensit Technologiesbased in USA
SENSIT GOLD CGI is a gas leak detector and confined space monitor in one user-friendly instrument. Its durable design and easy operation makes finding gas leaks fast and accurate. The bright LCD display shows up to 4 gas concentrations simultaneously, fulfilling any confined space entry requirements. A bar-hole test feature helps to ...
-
Manufactured by Sensit Technologiesbased in USA
Trak-It IIIa is ideal for underground natural gas leak pin pointing, pipeline purging, and confined space applications. This multi gas detector is available for areas requiring UL, CSA and IECEx/ATEX ...
-
Manufactured by SAACKE GmbHbased in GERMANY
With the CCS-HT combustion chamber series, SAACKE offers standardized hot gas generators in a wide load range. Proven thousands of times in real applications, they are suitable for all standard fuels as well as numerous special fuels and can be used to operate any SAACKE burner in almost any installation ...
-
Manufactured by Leverage Incorporated NVbased in BELGIUM
Fuel gas/liquid skids for combustion plants : it is a modular unit complete with piping, supports, tubing, valve assemblies, filters, instrumentation, wiring on board and junction boxes. Engineering department develops detailed engineering starting from basic information and technical specifications complying with the main international ...
-
Manufactured by Encore Combustionbased in USA
Suitable for use in all bio-gas applications – landfill, wastewater treatment, food processing, breweries, etc.. Provides ground based, completely hidden combustion process. Provides smokeless combustion. The combination of residence time, elevated combustion temperatures, and a turbulent mixing zone create greater ...
-
Manufactured by Clyde Bergemann Power Groupbased in GERMANY
is for the control, modulation or isolation of air-gas flow, its long-term performance and cost-effectiveness are determined largely by the integrity of its design. A well-engineered damper serves its purpose effectively and efficiently, delivering many years of reliable service that contribute significantly to a plant’s smooth and safe operation. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
requires the logging and forwarding of the gas quantity and combustion data. In addition to flow rate and combustion measurement sensors with signal output, ennox delivers required gas flare systems, condensate drainage,gas cleaning, volume flow rate- and combustion temperature measurements ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
gas flares can be specially configured for the burning of biogas and biomethane. The fully customized burner technology and combustion chamber design guarantees an efficient and environmentally friendly combustion of the gas. The complete ennox reange of accessories i.e, compressor station, temperature monitoring and winter ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Following many years of R&D and development in the thermal treatment arena. Inciner8 have launched a range of cremation ovens. Most notably is the development of the world's first truly mobile cremator. Utilising hot hearth technology and 4 chamber post combustion gas processing these models are state-of-the-art and will provide many ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the ...
-
Manufactured by Biogaz System Depollution Valorisation (BSDV)based in FRANCE
The biogas extracted from the gasometer is directed to the destruction unit, where the gas mixture burns until the combustion of its main elements. The destruction unit has as a function to regulate the excessive gas, result of the difference between the production and the biogas consumption of the treatment station. The BSDV destruction ...
-
Manufactured by Infragas Srlbased in ITALY
INFRAGAS® radiant burners RHT are infrared pre-mix gas systems able to reach a surface temperature up to 950°C. Radiant High Temperature heaters are a safe and reliable source of heat generated by a gas combustion (Natural Gas or Propane) and transmitted through infrared rays in short wavelength. The infrared energy ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you