Gas Engine Equipment Available In Europe
-
ShowcaseManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The EGC2 is a highly advanced and versatile electronic gas volume corrector designed by Continental Controls Corporation. It accurately measures and corrects the volume of natural gas flowing through pipelines, helping to ensure accurate billing and compliance with regulatory requirements. Its compact design, user-friendly interface, and ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation’s VI200 is a versatile, microprocessor-based air-fuel ratio controller that can be used in a variety of combustion systems. It is designed to provide precise and accurate control of the air-fuel ratio, which can help improve fuel efficiency, reduce emissions, and extend equipment life. The VI200 is compatible with a wide range of sensors and actuators, ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its ...
-
based in IRELAND
The sail system is integrated with a Rolls-Royce gas spark ignition ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. For maximum ...
-
Manufactured by IGF Biogasbased in SWEDEN
We have experience in supplying various sizes of gas engines for a wide range of applications. Our largest customer group has been sewage treatment plants that want to exploit the gas that can be extracted from the products that the treatment plant can dispose of from its digesters. But we have also delivered to farmers who wanted to ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power ...
-
Manufactured by Caterpillar Energy Solutions GmbHbased in GERMANY
Gas engine TCG 2020 / TCG 2020 K - Facts and Figures,Output range from 1,200 to 2,000 kwe.Best electrical and thermal efficiency in its output class.Runs on all gas types: natural gas, biogas, landfill gas, sewage gas, mine gas, etc.TCG 2020 is mainly used for CHP plants in ...
-
based in NETHERLANDS
Natural gas or biogas from digestion processes and landfill sites are used to drive (static cogeneration) engines for power production. When the exhausts of these engines are connected to the Triogen ORC, the total electrical production of the plant will be increased by up to 10%. The engine condenser load as well as the ORC ...
-
Manufactured by Caterpillar Energy Solutions GmbHbased in GERMANY
Output range from 400 to 800 kwe. Runs on all gas types: natural gas, biogas, landfill gas, sewage gas, mine gas, syngas, etc.Mainly used for biogas plants and small CHP plants in Europe.Highest electrical efficiency in the output range up to 1,000 kwe.More than 1900 power generators with approximately 1,000,000 ...
-
based in AUSTRIA
Whether you’re seeking full power at high efficiency levels or a 10MW unit capable of start-up in 2 minutes, INNIO’s Jenbacher J920 FleXtra gas engine is a reliable solution for large gas engine power generation plants. This Jenbacher gas engine is designed to support a broad variety ...
-
based in AUSTRIA
Based on the proven design concepts of Jenbacher Type 3 and Type 6 engines, Type 4 gas engines are characterized by high power density and outstanding efficiency. Enhanced control and monitoring provide easy maintenance capabilities, as well as excellent reliability and availability. 5,800+ engines delivered since 2002. ...
-
Manufactured by Guascor Energy S.A.U.based in SPAIN
Ideal for power generation, cogeneration/trigeneration, mechanical drive and marine applications – the lean burn, electronically carbureted SL gas engines have an output range from 209 to 1150 kWb at 50 Hz and 60 Hz. Providing an excellent solution when fueled by natural gas, landfill and sewage gas, flare and well ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The VGF series of high-speed engines are built with the durability expected from a medium-speed engine. Purposefully designed for a wide range of stationary, spark ignited, gaseous fuel applications, the compact VGF engine has a high power- to-weight ratio. The foundation for exceptional long-term performance is attributed to the core VGF ...
-
Manufactured by Guascor Energy S.A.U.based in SPAIN
Robust and reliable, the rich burn, electronically carbureted SR Series gas engines offer great performance for power generation and cogeneration ...
-
Manufactured by Biogas Systems ABbased in SWEDEN
The gas engineuses the energy content of the gas to generate electricity. Biogas may need cleaning before it is fed to the engine. As a rule of thumb, one-third of the biogas is turned into electricity and two-thirds is turned into heat. The generation efficiency of gas engines run on biogas is around 38-40 per ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Based on the proven design concepts of Type-3 and Type-6, the modern Type-4 engines in the 800-1,500kWe power range are characterised by a high power density and outstanding efficiency. The optimised control and monitoring provides easy preventative maintenance and maximum reliability and ...
-
Manufactured by Guascor Energy S.A.U.based in SPAIN
Lean burn and electronically carbureted the SM series of gas engines provide an excellent solution for power generation, cogeneration and trigeneration ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you