Gas Engine CHP Equipment
-
Manufactured by Bücker + Essing GmbHbased in GERMANY
Refurbished AT engine, repaired according to RAL-GZ 797. Four-stroke Otto gas engine (190/210 kW). 6 cylinders in line. Turbocharging: Exhaust gas turbocharger with water-cooled turbine housing. Mixture cooler: two-stage mixture cooling with high and low temperature ...
-
Manufactured by Bücker + Essing GmbHbased in GERMANY
Refurbished AT engine, repaired according to RAL-GZ 797. Four-stroke Otto gas engine (250 kW). 8 V-shaped cylinders.Turbocharging: Exhaust gas turbocharger with water-cooled turbine housing. Mixture cooler: two-stage mixture cooling with high and low temperature ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the ...
-
Manufactured by GTP Solutions GmbHbased in GERMANY
State-of-the-art gas engine CHP-pants in container design or as building ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
This Burkhardt adaptation of the popular MAN D26 pilot injection gas engine of the CHP ECO 180 HG operates without pilot oil. Thus, it is operated on wood gas alone and is even easier to service. The pilot oil unit was removed. Instead, the wood gas-air mixture is ignited with spark plugs. The Burkhardt ECO 165 ...
-
Manufactured by Gastreatment Services (GTS)based in NETHERLANDS
GtS provides gas mixing systems to add natural gas to geothermal gas to achieve a minimum caloric value. Also for other gasses GtS can design and build gas mixing stations, for example for adding air to biogas in order to make Active Carbon work properly or if the natural gas quality fluctuates a lot. In order to ...
-
Manufactured by Zorg Biogas GmbHbased in GERMANY
Biogas, syngas, biomethane and landfill gas always contain water vapor in an unsaturated state. During combustion, the water vapor results in considerable corrosion damage to the gas engines and turbines. Malfunctions caused by damage leads to significant downtime and higher repair costs. The use of a gas dehumidification system ...
-
Manufactured by Combigas ApSbased in DENMARK
In the biogas plant, the waste products, also known as biomasses, are pumped into the oxygen-free reactors where they are heated. In the reactor a biological process takes place in which the bacteria produce ...
-
by Trevi nvbased in BELGIUM
Together with BiogasTec Trevi builds facilities for anaerobic digestion, also called biogas plants. A biogas plant is a plant which - as the name implies - produces biogas. This gas is a renewable energy source based on organic material. This organic material concerns manure, waste and energy crops. Biogas is certainly not new. ...
-
Manufactured by ARCHEA New Energy GmbHbased in GERMANY
The cultivated renewable raw materials are ensiled in a substrate storage and there stored until they are used in the plant. The most commonly used are corn silage, grass silage, manure, slurry and other renewable resources. All organic substances are introduced through the substrate entry. This mixing tank is connected with screw conveyors to the fermenter. These screws then dose very precisely ...
-
Manufactured by Eaton Corporationbased in USA
concept not only enables quick and easy installation and commissioning but allows users to maintain sensors on-site without the need for engineer site visits and expensive service contracts. The platform, modular design also offers the flexibility of upgrading or expansion to meet future demands as your plant’s measurement needs ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
BF-3000B Ultrasonic Biogas Flowmeter is based on technology combination of pressure differential and ultrasonic transit time differential measurement method. With a bypass structure in the flow meter, gas flow in the main line is inferred by measuring the gas flow in the small bypass line, it can effectively solve the problems such as ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy is an authorised distributor and service provider for Techno Project Industriale’s (TPI’s) biogas upgrading plants. These include both membrane and selective solvent-based washing systems. With Clarke Energy’s engineering, procurement, construction and aftersales support capabilities we are able to offer full ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you