Only show results in Virginia? Ok

Gas Engine Emissions equipment

  • Premium

    GE Jenbacher - Model Type-6 - Gas Engine

    Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Engine - Gas Engine Product line

  • Premium

    GE Jenbacher - Model Type-4 - Gas Engine

    Based on the proven design concepts of Type-3 and Type-6, the modern Type-4 engines in the 800-1,500kWe power range are characterised by a high power density and outstanding efficiency. The optimised control and monitoring provides easy preventative maintenance and maximum reliability and availability.

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Engine - Gas Engine Product line

  • Premium

    Coal Seam Gas / Coal Bed Methane

    Coal Seam Methane (CSM) or Coal Bed Methane (CBM) is primary coal seam gas collected from unmined coal seams. These coal seams are drilled down into, releasing the associated gas which is extracted and can be used to generate electricity. CSM consists of over 90% methane and can be harvested independently of coal mining in some locations. The gas ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Coal Gas Product line

  • Biogas-Upgrader

    The BMF HAASE Biogas-Upgrader refines biogas to biomethane by organic-physical scrubbing. This particularly efficient method is characterized by low methane emissions and low power consumption. The BMF HAASE Biogas-Upgrader displays a positive heat balance and upgrades biogas without any heat loss. The required process heat is produced by the ...

    By BMF HAASE Energietechnik GmbH based in Neum√ľnster, GERMANY. from Gas Engineering Product line

  • Premium

    BIDOX - Biological Desulphurization of Gas Streams

    One of the most efficient systems for the biological removal of sulphides from biogas is the BIDOX (BIological Desulphurization by OXidation). No chemicals are needed to operate the BIDOX system. The installation requires limited maintenance, is equipped with little process control and manages to reduce the amount of H2S in biogas to levels below ...

    By Colsen International b.v. based in HULST, NETHERLANDS.

  • Premium

    Gas Turbines - HRSG

    Co - Oxidation Catalyst / Natural Gas: A high performance oxidation catalyst system and carbon steel housing that can be designed and manufactured to fit all sizes of gas turbines.

    By Catalytic Combustion Corporation based in Bloomer, WISCONSIN (USA). from Power Generation Catalyst Product line

  • Premium

    Shand & Jurs Biogas - Model 97310 - Enclosed Flare

    The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burners and Flares Product line

  • Kawasaki Gas Turbine - Model GPB60/60D - Heavy Duty Single Combustor Gas Turbine

    Ideal for reliable on-site base load power generation requiring from 4.5 MW to 5.2 MW for co-generation applications.The GPB60/60D is based on Kawasaki's proven M7A heavy duty industrial gas turbine with over 15 years of commercial experience and proven reliability.  At 5.4 MW (ISO), it is ideal for cogeneration applications in offshore oil ...

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPB (Base Load) Series Product line

  • Premium

    Shand & Jurs Biogas - Model 97300 - Waste Gas Burner

    The Shand & Jurs Biogas 97300 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. The 97300 efficiently incinerates waste gases thus minimizing odors and VOC’s. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burners and Flares Product line

  • Kubota Engine - Model DG972-E2 - Spark Ignited Engines

    The Kubota DG Series offers a new solution to the increasing needs for natural gas engine. The diesel engine based Kubota DG Series gives users the same foot-print, reliability and durability of D902, WG972 acknowledged as the world's top quality small industrial engines.Kubota offers SAE Flywheel Housing and Rear End Plate specifications for the ...

    By KUBOTA Engine America Corporation based in Lincolnshire, ILLINOIS (USA). from Spark Ignited Engines Product line

  • Gas Gensets

    Guascor engines have a reputation of excellent quality and reliability and have been in use in all the oceans and continents over the last 35 years. Guascor produces gas engines with outputs from 150 kW to 985 kW and has developed their engine range on 4 basic platforms- 6 & 8 cylinder in line, 12 & 16 cylinder Vee. Over 90% of the parts ...

    By GGE Power Pvt. Ltd. based in New Delhi, INDIA. from Engines & Gensets Product line

  • Kawasaki Gas Turbine - Model GPB30/30D - Heavy Duty Single Combustor Gas Turbine

    Ideal for reliable on-site base load power generation requiring from 2000 kW to 3000 kW for co-generation applications. The GPB30 / 30D is based on Kawasaki's proven heavy duty single combustor engine platform with over 20 years of commercial experience and proven reliability. It is designed for installation in areas requiring ...

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPB (Base Load) Series Product line

  • Premium

    AEREON - Gas-Assist Flares for the Shale Play

    Gas-assisted flares are flares that use an additional source of fast-moving gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. Typically utilized when you have a readily available source of natural gas, and a preference to not use a ...

    By AEREON based in Austin, TEXAS (USA). from Flares for the Shale Play Product line

  • Premium

    Shand & Jurs Biogas - Model 97301 - Waste Gas Flare

    The Shand & Jurs Biogas 97301 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. Typical applications include anaerobic digesters, lagoons, landfills and methane offgas from other fermentation processes. The 97301 efficiently incinerates waste gases thus ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burners and Flares Product line

  • CataStak - Gas-Fired Turbines

    Similar to other combustion processes, the primary pollutants of gas turbines include NOx and CO. For turbines with heat recovery, the exhaust temperature can drop below 300°F. With those factors in mind, it only made sense that Nationwide Boiler developed CataStak™ SCR system technology for gas turbine applications.

    By Nationwide Boiler Inc. based in Fremont, CALIFORNIA (USA). from Lower Emissions - Environmental Solutions Product line

  • Premium

    GE - Model APG - Associated Petroleum Gas / Flare Gas

    Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Other Product line

  • Kawasaki Gas Turbine - Model GPB17/17D - Heavy Duty Single Combustor Gas Turbine

    Ideal for reliable on-site base load power generation requiring from 1200 kW to 1700 kW for co-generation applications.The GPB17/17D is based on Kawasaki's proven M1A heavy duty single combustor gas turbine with over 20 years of commercial experience and proven reliability.  At 1690 kW (ISO), it is ideal for cogeneration applications in ...

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPB (Base Load) Series Product line

  • MWM - Model TCG 2016 - Gas Engine

    Output range from 400 to 800 kwe. Runs on all gas types: natural gas, biogas, landfill gas, sewage gas, mine gas, syngas, etc.Mainly used for biogas plants and small CHP plants in Europe.Highest electrical efficiency in the output range up to 1,000 kwe.More than 1900 power generators with approximately 1,000,000 kwe already installed around the ...

    By MWM GmbH based in Mannheim, GERMANY. from Gas Engines / Gensets Product line

  • MWM - Model TCG 2020 / TCG 2020 K - Gas Engines & Power Generators

    The MWM gas engines of the TCG 2020 series are perfectly geared to the challenges of a dynamic market environment. Our models in the output range of 1,200 – 2,000 kWel meet the high requirements of a broad range of applications and guarantee efficiency, reliability, flexibility and environmental sustainability, together with low lifecycle ...

    By MWM GmbH based in Mannheim, GERMANY. from Gas Engines / Gensets Product line

  • MWM - Model Tcg 2032 - Gas Engine

    Gas engine TCG 2032 - Facts and Figures,Output range from 3,000 to 4,300 kwe ‒ MWM's largest series,Mainly used in large IPP projects with up to 100,000 kwe,Outstanding reliability and low maintenance costs, More than 400 power generators with approximately 1,400,000 kwe already installed around the globe

    By MWM GmbH based in Mannheim, GERMANY. from Gas Engines / Gensets Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you