Gas Engine Generator Equipment
-
Manufactured by Northeast Energy Systemsbased in USA
With our deep insights on project development of combined heat and power technologies, Jenbacher Type 4 installations provide substantial reduction of the environmental footprint in facilities that have consistent electrical and thermal requirements. Pushing the boundaries of efficiency in the 800 to 1500 kW power class, the Jenbacher Type 4 is characterized by its high power density and maximum ...
-
Manufactured by Camda Generator Work Co., Ltdbased in CHINA
Camda H Series is a an excellent type in the family of Camda"s gas generator sets. It is developed by Camda in cooperation with Cummins China, who authorize only Camda to convert its protype engine into gas engines. Fueled by biogas and natural gas, the capacity ranges from 24Kw to 500Kw. It has ...
-
Manufactured by Northeast Energy Systemsbased in USA
The Jenbacher Type 6 installations represent the future of power generation and thermal recovery in the 1800 to 4400 kW range. Featuring a 1,500 rpm engine speed that results in high power density, the Jenbacher Type 6 generates electricity at up to 46.6% efficiency, the top in its class. When installed as part of a cogeneration ...
-
Manufactured by Northeast Energy Systemsbased in USA
of gas types, and it can be configured as a generator set, cogeneration system, or containerized generator set/cogeneration unit. The Jenbacher Type 2 supports your clean energy initiatives by using biogas, sewage gas, and landfill gas to produce electricity and heat in an environmentally friendly manner. By ...
-
Manufactured by Camda Generator Work Co., Ltdbased in CHINA
Camda H Series is a an excellent type in the family of Camda"s gas generator sets. It is developed by Camda in cooperation with Cummins China, who authorize only Camda to convert its protype engine into gas engines. Fueled by biogas and natural gas, the capacity ranges from 24Kw to 500Kw. It has ...
-
Manufactured by Northeast Energy Systemsbased in USA
For power generation in the 600 to 1100 kW range, a Jenbacher Type 3 system will allow your facility to produce energy efficiently, reliably, cost effectively, and with an elevated level of environmental awareness. As the single point of contact, we manage our supply from engineering and configuration through installation, commissioning, and ...
-
Manufactured by Caterpillar Energy Solutions GmbHbased in GERMANY
The MWM gas engines of the TCG 2020 series are perfectly geared to the challenges of a dynamic market environment. Our models in the output range of 1,200 – 2,000 kWel meet the high requirements of a broad range of applications and guarantee efficiency, reliability, flexibility and environmental sustainability, together with low ...
-
Manufactured by Caterpillar Energy Solutions GmbHbased in GERMANY
The MWM gas engines of the TCG 2016 series are perfectly geared to the challenges of a dynamic market environment. Our models in the output range of 400 – 800 kWel meet the high requirements of a broad range of applications and guarantee efficiency, reliability, flexibility and environmental sustainability, together with low lifecycle ...
-
Manufactured by ETS Engine Technology Solutions S.p.A.based in ITALY
Technical data is based on a calorific fuel value of 10 kWh/Nm3 for natural gas and 6 kWh/Nm3 for special gas. The values are provided for information purposes only and are ...
-
Manufactured by ETS Engine Technology Solutions S.p.A.based in ITALY
Technical data is based on a calorific fuel value of 10 kWh/Nm3 for natural gas and 6 kWh/Nm3 for special gas. The values are provided for information purposes only and are ...
-
Manufactured by ETS Engine Technology Solutions S.p.A.based in ITALY
Technical data is based on a calorific fuel value of 10 kWh/Nm3 for natural gas and 6 kWh/Nm3 for special gas. The values are provided for information purposes only and are ...
-
Manufactured by ETS Engine Technology Solutions S.p.A.based in ITALY
Technical data is based on a calorific fuel value of 10 kWh/Nm3 for natural gas and 6 kWh/Nm3 for special gas. The values are provided for information purposes only and are ...
-
Manufactured by ETS Engine Technology Solutions S.p.A.based in ITALY
Technical data is based on a calorific fuel value of 10 kWh/Nm3 for natural gas and 6 kWh/Nm3 for special gas. The values are provided for information purposes only and are ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically ...
-
Manufactured by ETTES Power Machinery Corpbased in CHINA
Ettes Power Cummins series biogas engine generator & CCHPs, from 30kW to 500kW, high performance & high efficiency for project of cogenerator of WtE (waste to energy) & distributed energy ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Natural gas or biomethane can be transported in cylinders where there is no availability of gas distribution networks, via a virtual gas pipeline. This gas can be used in gas engines to generate electricity and heat at high efficiency through combined heat and power technology. ...
-
Distributed by Atlantic Power Solutionsbased in USA
Range of 4-2000 KW sizes. Used in numerous applications our electric generators have prove to be a dependable electric source. Powered by diesel, LPG and natural gas engines, our electric generators will help you generate your most efficient electric power. We offer a convenient range of electric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you