Gas Powered Turbine Equipment In Asia & Middle East
-
Manufactured by IHI Corporationbased in JAPAN
LM6000 is a simple-cycle, 2-shaft, high performance gas turbine derived from the core of GE’s reliable air craft engine, CF6-80C2. CF6-80C2 has logged more than 76,500,000 operational flight hours, a 99.97% dispatch reliability, and commercial aviation’s lowest shop visit ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX501-KB7 package builds on the reliable KB5 with the addition of a zero stage to the compressor inlet of the Siemens turbine. This increases mass flow and pressure ratio, thus increasing performance and efficiency and boosting power output to over ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
efficiencies of 80% or higher. Incorporating proven gas turbine technology, the CX400 engine offers cost-effective power for a wide range of ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
efficiencies of 80% or higher. Incorporating proven gas turbine technology, the CX400 engine offers cost-effective power for a wide range of ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX300 has a compact industrial design which enables high effIciency (nominal 31%) and excellent emissions performance. These characteristics provide the flexibilty to meet the needs of a broad range of power generation applications. The SGT-300 single-shafted industrial gas turbine is a proven unit for all electrical power ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. ...
-
Manufactured by Honeywellbased in USA
The HGT400 gas turbine auxiliary power unit (APU) is the next generation derived from the RE220 family of APUs. The HGT400 APU offers an integrated system that supplies pneumatic and electric power for the aircraft while on the ground or ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The FPP130 Floating Power Plant is a self-contained, modular electricity generating system designed to be easily transportable and positioned in ports, on rivers or in sheltered coastal locations. The Power Plant comprises two Centrax-manufactured Siemens Trent 60 gas turbine-powered generator sets. The ...
-
Manufactured by MAPNA Turbine Engineering & Manufacturing Co. (TUGA)based in IRAN
Cost, durability and flexibility are major challenges in the power generation industry. The quality of manufacturing, long life service, ability to fire with various types of fuels and capability of use in simple and combined cycles are among the characteristics that the MAPNA power gas turbine can offer to tackle those ...
-
Manufactured by JSC GRASYSbased in RUSSIA
turbine power plants without preliminary treatment, as well as by unprofitability of processing relatively small volumes of such gas with the use of conventional techniques. ...
-
Manufactured by Xi`an Shaangu Power Co.,Ltdbased in CHINA
The blast furnace energy recovery device of the coaxial system of the blast furnace blower and the blast furnace gas residual pressure turbine power generation device in the metallurgical industry, referred to as the BPRT (Blast Furnace Power Recovery Turbine) device, which will place the blast furnace blower and ...
-
Manufactured by Siemens AGbased in GERMANY
The SGT-100 gas turbine is an industrial gas turbine in the power output range from 5 to 6 megawatts (MW) which combines compact and rugged construction with advanced technology. For industrial power generation a single-shaft version of the SGT-100 is used which has a power ...
-
based in USA
We deliver solutions that cater to the needs of each customer. Interlink Power Systems has successfully completed highly complex engineering, procurement and construction projects for clients in remote and challenging locations across the globe in the energy services ...
-
based in SOUTH KOREA
90MW Medium-Size Gas Turbine for Flexibly Meeting Load Balancing Requirements. Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel ...
-
based in SOUTH KOREA
Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you