Gas Powered Turbine Equipment In Europe
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The 501-KB5 aeroderivative gas turbine engine shares commonality with the other single-shaft 501-K engines. Its low mass flow and high exhaust temperature makes the KB5 the ideal engine for ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
efficiencies of 80% or higher. Incorporating proven gas turbine technology, the CX400 engine offers cost-effective power for a wide range of ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX300 has a compact industrial design which enables high effIciency (nominal 31%) and excellent emissions performance. These characteristics provide the flexibilty to meet the needs of a broad range of power generation applications. The SGT-300 single-shafted industrial gas turbine is a proven unit for all electrical power ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The CX501-KB7 package builds on the reliable KB5 with the addition of a zero stage to the compressor inlet of the Siemens turbine. This increases mass flow and pressure ratio, thus increasing performance and efficiency and boosting power output to over ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
efficiencies of 80% or higher. Incorporating proven gas turbine technology, the CX400 engine offers cost-effective power for a wide range of ...
-
Manufactured by FAIST Anlagenbau GmbHbased in GERMANY
As an operator of a gas power station you are aware of the challenge: gas power stations are important elements in energy-generation mixes with their stand-by duty and flexibility in power generation in line with requirements. Yet the competition from modern coal-fired power plants and renewable ...
-
Manufactured by Iqony GmbHbased in GERMANY
Energy plants are the heart of your production. They have to supply heat and power reliably – and increasingly sustainably and renewably, while ensuring a high level of availability. Cogeneration technologies, such as combined-cycle gas turbine (CCGT) power plants, the use of energy from renewable sources, the use of ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. ...
-
based in NETHERLANDS
The most versatile LM2500 (+) maintenance dolly with many practical improvements. Applicable for LM2500 and LM2500+ versions; Can be used as stand alone gas turbine, gas generator or power turbine dolly; Can be used as transport or maintenance dolly; Secure transport through TMF aft flange support (thick and thin ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
In today's dynamic and fast changing power generation market, gas turbine power plant operators face ongoing challenges in terms of operational flexibility and a continuous need for CO2 emission reductions. Ansaldo Energia provides unprecedented solutions for future proofing Customerers' assets in this changing regulatory and ...
-
Manufactured by Ideal Electric Companybased in USA
The first IDEAL ELECTRIC branded, multi-megawatt permanent magnet synchronous generator was introduced in 2018. The air-cooled machine sets new benchmarks for power density and weight saving in mobile gas turbine power unit applications for electric hydraulic ...
-
Manufactured by Honeywellbased in USA
The HGT400 gas turbine auxiliary power unit (APU) is the next generation derived from the RE220 family of APUs. The HGT400 APU offers an integrated system that supplies pneumatic and electric power for the aircraft while on the ground or ...
-
Manufactured by Centrax Ltdbased in UNITED KINGDOM
The FPP130 Floating Power Plant is a self-contained, modular electricity generating system designed to be easily transportable and positioned in ports, on rivers or in sheltered coastal locations. The Power Plant comprises two Centrax-manufactured Siemens Trent 60 gas turbine-powered generator sets. The ...
-
Manufactured by Siemens Energy Global GmbH & Co. KGbased in GERMANY
Well-proven H-class technology backed by largest commercially operating fleet experience in the market. Simple cycle power generation (ISO), 450 MW(e), Combined cycle efficiency: 62%, Powerful gas turbine for highly efficient combined cycle ...
-
Manufactured by Braden Groupbased in USA
Braden has designed and manufactured diverter isolators since 1985. The bulk of our diverter experience is in combined-cycle gas turbine power plants, where extreme and sudden thermal changes necessitate thorough design foresight. We have also designed diverters for desulfurization (FGD) applications with several unique and patented ...
-
Manufactured by HEAT Gas Technologies GmbHbased in AUSTRIA
Fuel gas supply systems are used to condition the fuel (natural gas) for gas turbines or boiler units to the necessary data needed for the burners. Large consumers are usually supplied by a direct connestion tot he natural gas high pressure grid and therefore the pressure must be reduced to a lower level for the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you