Only show results in Virginia? Ok

Gas Turbine equipment

  • Flex Turbine - Model MT250 - Gas Turbines

    Ultra-clean electricity and useful thermal energy from a rugged and efficient gas turbine.250 kW Continuous Onsite Electrical Power with Integrated Heat Recovery

    By FlexEnergy Inc based in Portsmouth, NEW HAMPSHIRE (USA).

  • Kawasaki Gas Turbine - Model GPS1000 - Stand-by Gas Turbine

    The GPS1000 is ideal for facilities that require high quality and highly reliable standby (or emergency) power generation and a capacity from 600 kW to 800 kW.  The GPS stand-by gas turbine is designed for reliable emergency back up power for data centers, hospitals (non-life safety loads), prisons and other mission critical facilities.

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPS (Stand-by) Series Product line

  • GE - Model 7F-5 - Gas Turbine

    As part of the FlexEfficiency* 60 Portfolio of products, GE’s 7F-5 gas turbine incorporates advanced combustion technology to deliver operating flexibility, including better turndown capability, while sustaining higher levels of efficiency. This translates into increased revenue across a wide range of operating conditions.

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbine Product line

  • MHPS - Model H-25 & H-50 & H-100 - Gas Turbines

    The H-25 Series gas turbines are based on a rugged, single-shaft, heavy-duty type frame gas turbine design that has been successfully applied since 1988 in the oil & gas, as well as the power generation industry. The H-25 fleet is highly reliable and mature, with over 5,000,000 actual fleet operating hours.

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA). from Gas Turbines Product line

  • Siemens - Model SGT-100 - Gas Turbine

    The SGT-100 gas turbine is an industrial gas turbine in the power output range from 5 to 6 megawatts (MW) which combines compact and rugged construction with advanced technology. For industrial power generation a single-shaft version of the SGT-100 is used which has a power output of 5.05 MW(e) or 5.4 MW(e). It is ideally suited ...

    By Siemens Power Generation based in Erlangen, GERMANY. from Gas Turbines Product line

  • MHPS - Model J-Series - Gas Turbines

    With the highly efficient, advanced J-Series gas turbines, MHPS raised the bar for combined cycle performance. The J-Series gas turbine was the first commercially available gas turbine capable of sustained operation at turbine inlet temperatures of 1600°C. The design is based on the proven G-Series gas turbines, with enhancements to the ...

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA). from Gas Turbines Product line

  • GE - Model GE LM2500 - LM Series - Gas Turbines

    ap+m supplies parts and services for many types of GE aeroderivative gas turbines. Below are some of the more commonly used engine types. The GE LM2500 is the workhorse of aeroderivative gas turbines, with more than 1,500 units in service and over 22 million operating hours with a variety of fuels and fuel/water combinations. Availability for the ...

    By ap+m based in Boynton Beach, FLORIDA (USA).

  • Gas Turbines

    The compressed intake air and biogas are ignited in the combustion chamber. The gases then pass through the turbine at high pressure and drive the generator. A turbine installation consists of a complete turbine assembly with gas compressor and monitoring equipment, with or without a heat exchanger for producing hot water. Biogas Systems AB ...

    By Biogas Systems AB based in Sunne, SWEDEN.

  • Gas Turbines

    Johnson Matthey provides complete NOx and CO emission control systems for simple cycle gas turbines, from the gas turbine outlet through the stack. Our systems offer high availability and efficiency, while meeting all of today's stringent emission control standards. We also work with major leading HRSG manufacturers to provide complete solutions ...

    By Johnson Matthey Emission Control Technologies based in Royston, UNITED KINGDOM. from Applications Product line

  • FlexEnergy - Model MT333 - Gas Turbines

    Ultra-clean electricity and useful thermal energy from a rugged and efficient gas turbine. Now with increased power and efficiency.333 kW Continuous Onsite Electrical Power with Integrated Heat Recovery

    By FlexEnergy Inc based in Portsmouth, NEW HAMPSHIRE (USA).

  • Kawasaki Gas Turbine - Model GPB30/30D - Heavy Duty Single Combustor Gas Turbine

    Ideal for reliable on-site base load power generation requiring from 2000 kW to 3000 kW for co-generation applications. The GPB30 / 30D is based on Kawasaki's proven heavy duty single combustor engine platform with over 20 years of commercial experience and proven reliability. It is designed for installation in areas requiring ...

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPB (Base Load) Series Product line

  • Kawasaki Gas Turbine - Model GPB06 - Heavy Duty Single Combustor Gas Turbine

    Ideal for reliable on-site base load power generation requiring from 1200 kW to 1700 kW for co-generation applications. The GPB17/17D is based on Kawasaki's proven M1A heavy duty single combustor gas turbine with over 20 years of commercial experience and proven reliability.  At 1690 kW (ISO), it is ideal for cogeneration applications in ...

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPB (Base Load) Series Product line

  • Kawasaki Gas Turbine - Model GPB17/17D - Heavy Duty Single Combustor Gas Turbine

    Ideal for reliable on-site base load power generation requiring from 1200 kW to 1700 kW for co-generation applications.The GPB17/17D is based on Kawasaki's proven M1A heavy duty single combustor gas turbine with over 20 years of commercial experience and proven reliability.  At 1690 kW (ISO), it is ideal for cogeneration applications in ...

    By Kawasaki Gas Turbines based in Houston, TEXAS (USA). from GPB (Base Load) Series Product line

  • MAPNA - Model 160 MW - Gas Turbine

    Cost, durability and flexibility are major challenges in the power generation industry. The quality of manufacturing, long life service, ability to fire with various types of fuels and capability of use in simple and combined cycles are among the characteristics that the MAPNA power gas turbine can offer to tackle those challenges. Large-volume, ...

  • Gas Turbines

    The suction of oil mist in the bearings of gas turbines. The lube oil cycle of a gas turbine is a sensitive entity which should be protected from environmental influences. FRANKE-Filter Oil Mist Separators provide that protection. Humidity and contaminants are extracted, then filtered and led back into the lube oil cycle. Furthermore, the ...

    By Franke-Filter GmbH based in Bad Salzdetfurth, GERMANY.

  • Gas Turbine

    In Gas Turbine based Cogeneration is a natural gas (or diesel) turbine coupled with an electrical generator which produces electricity. The exhaust heat from the gas turbine is directed to a waste heat recovery boiler ('WHRB'). Here the heat from gases trapped and steam is produced. This steam can be used for process or for power generation. The ...

    By Anama Energies Pvt. Ltd. based in Pune, INDIA.

  • IAC Acoustics - Gas Turbine Acoustic Enclosures

    The enclosure for a gas turbine installation used for power generation serves a number of different purposes including weather protection, turbine cooling, fire protection and an effective acoustic barrier. IAC Acoustics has extensive experience built up over a number of years in providing the best possible acoustic enclosures for a wide variety ...

    By IAC Acoustics based in Winchester, UNITED KINGDOM. from Gas Turbines Product line

  • Model 9E - Heavy Duty Gas Turbine

    The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbines - Heavy Duty Product line

  • Model LM6000 - Sprint Aeroderivative Gas Turbines

    Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbines - Aeroderivative Product line

  • Model 9FA - Heavy Duty Gas Turbine

    The most experienced F-class 50 Hz product. First introduced in 1992, the 9FA heavy duty gas turbine is a popular choice for combined cycle, cogeneration, or simple cycle plants where flexible operation and high performance are prime considerations. Designed for 50 Hz applications, this advanced technology turbine delivers power with high ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbines - Heavy Duty Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you