Refine by
Gas Turbine Engine Equipment & Supplies
103 equipment items found
Manufactured by:Vericor Power Systems based inAlpharetta, GEORGIA (US) (USA)
The TF series marine gas turbines by Vericor Power Systems are a result of decades of engineering experience and technical innovation, rooted in the legacy of the Lycoming Engine Company. These turbines are designed for cantilever mounting off the reduction gear, optimizing both weight and efficiency. This design ...
Showcase
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Hydraulic Clutch Assemblies provide high-torque engagement for industrial applications. Available in variable and fixed displacement types, they operate at pressures up to 5,000 psig (350 bar). Designed for high-speed operation, these assemblies feature SAE mounting and spline shafts, ensuring compatibility with open and closed-loop circuits. Ideal for marine, oil & gas, and power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Electric Start Assemblies deliver reliable 24 V DC starting power with solenoid-actuated Positork drives. Designed for SAE-3 mounting, they offer clockwise and counterclockwise rotation options and deliver up to 80 ft-lb torque. Engineered for rugged industrial use, these starters ensure smooth, dependable engine starts in marine, power generation, and oil & gas ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
The Continental Controls Corporation Black Box, also known as the CCC Black Box (or Z-Box), is a specialized device used to monitor and control engines. It is a compact, rugged electronic control unit designed to withstand harsh operating conditions. The CCC Black Box is responsible for managing a wide range of functions, including engine speed control, fuel flow, temperature regulation, and ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
The AGV50 is a compact and efficient air-fuel ratio controller for industrial gas engines from 5,000 bhp to 38,750 bhp. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV50 is easy to install and compatible with a variety of carburetors and mixers. It can be ...
Premium
Manufactured by:AMETEK Spectro Scientific based inChelmsford, MASSACHUSETTS (USA)
The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...
Premium
Manufactured by:Continental Controls Corporation (CCC) based inSan Diego, CALIFORNIA (USA)
Continental Controls Corporation’s FT10 comes pre-assembled with 1 ½” valves, ensuring convenient installation. The FT10 is compatible with various fuels, including natural gas, propane, and more. The Fuel Train isolation valve provides shutdown on a gas turbine by rapidly halting gaseous fuel flow. The valve utilizes the supply pressure to move a spring-loaded piston. When the valve is ...
Manufactured by:Kexing Special Ceramics Co., Ltd. based inPingxiang City, CHINA
Cordierite has a superior thermal shock resistance due to their intrinsic low coefficient of thermal expansion (CET), coupled with relatively high refractoriness and high chemical stability. Therefore, it is often used as high temperature industrial applications, such as: heat exchangers for gas turbine engines; honeycomb-shaped catalyst carriers ...
Manufactured by:Solar Turbines Incorporated based inSan Diego, CALIFORNIA (USA)
The Titan 130 continues Solar Turbines' legacy of highly reliable and durable gas turbine engines with low maintenance requirements. Like our other turbines used for power generation, the Titan 130 is also available for compressor and mechanical-drive ...
Manufactured by:Magellan Aerospace based inMississauga, ONTARIO (CANADA)
In this niche, yet highly competitive market, we utilize many unique processes to manufacture shafts for both the hot and cold sections of a gas turbine engine. Shafts up to 120 inches long and 30 inches diameter are machined and/or fabricated to very tight tolerances. They may be machined, electron beam welded, and/or inertia welded. Because we ...
Manufactured by:Hengst Air Filtration Denmark A/S based inNakskov, DENMARK
Effective protection for maximum performance. Our Filter mats are ideal for use in coalescence filters for gas turbines and turbomachinery. They remove solid and liquid particles from the gas flow and ensure that the gas is clean, dry and free of liquids. Especially in environments with high humidity, coalescence filters are ...
Manufactured by:Solar Turbines Incorporated based inSan Diego, CALIFORNIA (USA)
The Titan 130 continues Solar Turbines' legacy of highly reliable and durable gas turbine engines with low maintenance requirements. Like our other turbines used for power generation, the Titan 130 is also available for compressor and mechanical-drive ...
Manufactured by:Special Metals Corporation based inHuntington, WEST VIRGINIA (USA)
NIMONIC alloy 75 (UNS N06075/W.Nr. 2.4951 & 2.4630) is an 80/20 nickel-chromium alloy with controlled additions of titanium and carbon. First introduced in the 1940s for turbine blades in the prototype Whittle jet engines, it is now mostly used for sheet applications calling for oxidation and scaling resistance coupled with medium strength at high operating ...
Manufactured by:Parker Hannifin Corp based inCleveland, OHIO (USA)
Parker designs and manufactures air turbine starters for a comprehensive range of aircraft, marine and industrial applications. Our air turbine starters are designed to meet the speed, power, safety and reliability needs of modern gas turbine engine starting systems. Parker’s unique features and innovative ...
Manufactured by:Solar Turbines Incorporated based inSan Diego, CALIFORNIA (USA)
A gas turbine engine is a type of internal combustion engine. Essentially, the engine can be viewed as an energy conversion device that converts energy stored in the fuel to useful mechanical energy in the form of rotational power. The term “gas” refers to the ambient air that is ...
Manufactured by:Advanced Technologies Group (ATGI) based inStuart, FLORIDA (USA)
When implemented into a new design, it can help reduce the overall rotor length, leading to lower weight turbomachinery. The ATGI HALO seal also adds damping to the rotor system, reducing engine vibration. The patented non-contacting seal has been proven to increase performance, lower fuel consumption for military and commercial gas turbine ...