Gas Turbine Plant Equipment
-
Manufactured by IHI Corporationbased in JAPAN
LM6000 is a simple-cycle, 2-shaft, high performance gas turbine derived from the core of GE’s reliable air craft engine, CF6-80C2. CF6-80C2 has logged more than 76,500,000 operational flight hours, a 99.97% dispatch reliability, and commercial aviation’s lowest shop visit ...
-
Manufactured by enkotherm GmbHbased in GERMANY
Hot water application. Turbine: Capstone CR800. Thermal output: 810 kW. Dimensions: 560 x 180 x 300 cm. Weight: 4400 ...
-
Manufactured by Iqony GmbHbased in GERMANY
Energy plants are the heart of your production. They have to supply heat and power reliably – and increasingly sustainably and renewably, while ensuring a high level of availability. Cogeneration technologies, such as combined-cycle gas turbine (CCGT) power plants, the use of energy from renewable sources, the use of ...
-
based in USA
GT MASTER® simulates performance of a given plant at different operating conditions, such as different ambients, loads and control set-points. A GT MASTER plant model is defined by its hardware, by contrast with a GT PRO model which is defined by the assumptions used to create the hardware. The 4,000+ inputs which define plant ...
-
based in USA
GT PRO® automates the process of creating a combined cycle or gas turbine cogeneration plant design, guiding the user to rapidly and easily attain an optimal configuration and technical parameters. The user inputs design criteria, starting with the big picture and progressing in a logical sequence into greater details. Built-in expert ...
-
based in USA
PDETM (Plant Design Expert) is an intelligent shell that uses the GT PRO/GT MASTER design and simulation engines. PDE is a compact expert program, with built-in logic to create and configure suitable gas turbine power and cogeneration plants based on the user’s electricity and heat demands, site parameters, and constraints. ...
-
based in USA
Our D400 and D600 type steam turbines primarily support F-class and H-class gas turbine plants. They were developed for high-efficiency power generation at larger single-shaft or multi-shaft plants and for sites with low to very-low exhaust pressure. The D type steam turbines feature a combined ...
-
Manufactured by ENVI-Filter A/Sbased in DENMARK
consists of polypropylen. The biggest advantage of this filter is that it is 100% waterproof. At a pressure loss in the filter house which reduces the efficiency of the Gas Turbine plant the filter cartridges can easily be washed clean and once again be fitted in the ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
In today's dynamic and fast changing power generation market, gas turbine power plant operators face ongoing challenges in terms of operational flexibility and a continuous need for CO2 emission reductions. Ansaldo Energia provides unprecedented solutions for future proofing Customerers' assets in this changing regulatory and economic ...
-
Manufactured by Braden Groupbased in USA
Braden has designed and manufactured diverter isolators since 1985. The bulk of our diverter experience is in combined-cycle gas turbine power plants, where extreme and sudden thermal changes necessitate thorough design foresight. We have also designed diverters for desulfurization (FGD) applications with several unique and patented ...
-
Manufactured by U.S. Bellows, Incbased in USA
Refractory lined expansion joints are typically used in Fluid Catalytic Cracking Units (FCCU), furnaces, hot gas turbines, styrene plants, fluidized bed boilers, kilns, power recovery trains, and thermal oxidizers. For hot applications (up to 1400°F), the bellows are packed with KO wool and lined with insulating refractory. ...
-
Manufactured by JSC GRASYSbased in RUSSIA
turbine power plants without preliminary treatment, as well as by unprofitability of processing relatively small volumes of such gas with the use of conventional techniques. ...
-
Manufactured by ULMA Forged Solutionsbased in SPAIN
ULMA supplies forged blades to various sectors and for many different applications, such as blades for cooling fans in power generation plants, gas turbines, hydroelectric turbines, etc. Blade geometry and, in some applications, the materials used to manufacture the blades make their manufacture possible in only certain ...
-
Manufactured by HEAT Gas Technologies GmbHbased in AUSTRIA
plants the gas will be heated to high temperatures (app. 215 °C, depending on turbine type and manufacturer) to increase the efficiency of the turbine. To protect the equipment used in the fuel gas systems from damaging and wearout in the entrance of the systems a efficient cleaning oft he ...
-
Manufactured by Oy Galvatek Abbased in FINLAND
Automated chemical stripping plants for the maintenance of land-based gas turbine components in demanding conditions. Turn Key supply of automated Chemical Stripping Lines to Land Based Gas Turbine Maintenance, Repair and Overhaul. Just like in aero engines, the blades and vanes in land-based gas ...
-
Manufactured by Eagle Filters Ltd.based in FINLAND
PanelS Pre-Filterseries are comparable to pocket filters in dust holding capacity but superior in performance compared to coalescher. They are small in size, have a rigid construction and are unaffected by ...
-
based in USA
We deliver solutions that cater to the needs of each customer. Interlink Power Systems has successfully completed highly complex engineering, procurement and construction projects for clients in remote and challenging locations across the globe in the energy services ...
-
Manufactured by Againity ABbased in SWEDEN
Installed capacity: 50 kW. Size (L+W+H): 4,1 x 1,7 x 2,5 m. Freq.:50-60 Hz. Voltage: 380-415 ...
-
Manufactured by Againity ABbased in SWEDEN
Installed capacity: 100 kW. Size (L+W+H): 4,1 x 1,7 x 2,5 m . Freq.:50-60 Hz. Voltage: 380-415 ...
-
Manufactured by Inercobased in SPAIN
INERCO offers comprehensive and advanced energy storage solutions in the application areas of power generation (conventional and renewable), transmission, distribution and consumption. These systems allow the optimization and management of power generation sources and consumption, to ensure the grid stability and quality, deferral of infrastructure investments and to avoid electrical failures, in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you