Gas Turbine System Equipment In USA
-
Manufactured by Concord Environmentalbased in USA
Concord Environmental has in-depth experience in the design, supply and optimization of SCR systems for both combined cycle (CC) and simple cycle (SC) power generation assets. Concord’s engineering and technology background provides the customer with a unique skillset because of its experience with all major HRSG, gas turbine, and ...
-
Manufactured by Braden Groupbased in USA
A gas turbine bypass system diverts flue gases from the Heat Recovery Steam Generator (HRSG) in combined cycle mode to a bypass stack with a silencer assembly to operate in simple cycle mode. Maintenance can then be performed on the HRSG as the diverter isolates it completely from the gas ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Gas turbines are an indispensable component in a wide variety of industries and industries. Their flawless and safe functioning accordingly has a decisive influence on the profitability and productivity of the operation as well as on the increasingly relevant energy efficiency. A tailor-made and optimal isolation of gas turbines ...
-
Manufactured by Braden Groupbased in USA
Consolidated Fabricators (ConFab) specializes in the engineering and manufacture of complex systems to support power generation, especially gas turbines. Both OEMs and their customers come to us to help produce complicated systems that incorporate mechanical, electrical and fluid control disciplines. With over 25 years of ...
-
Manufactured by Mee Industries Incbased in USA
generates proven results. Fact: A MeeFog™ Inlet Air Fogging System will increase your gas turbine power output at a fraction of the cost of new power generation equipment. As the original developers of inlet air fogging technology, Mee Industries will increase your gas turbine power output, period. Since ...
-
Manufactured by CECO Environmentalbased in USA
To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine ...
-
Manufactured by Combustion Associates Inc. (CAI)based in USA
CAI’s Spirit 2 MW is an Industrial Gas Turbine Power Generation package that is custom designed for continuous, reliable operation where power needs are most critical. It is ideal for Distributed Generation – power generated at the point of use. This one-module ISO containerized system that can be used in island mode or ...
-
Manufactured by Combustion Associates Inc. (CAI)based in USA
a proven aero-derivative gas turbine that gives over 40 million hours of operation and is specifically modified for alternative fuel operation. ...
-
Manufactured by Braden Groupbased in USA
The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...
-
Manufactured by CECO Environmentalbased in USA
Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules ...
-
Manufactured by CECO Environmentalbased in USA
Simple cycle gas turbine operation is a fast and reliable way to provide flexible power demand at short notice, and we provide a range of solutions that support effective cyclic operation and the changes in thermal load which are part of the frequent start and stop cycles. Each Peerless-Aarding brand Gas Turbine Single Cycle ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine exhaust Diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree ...
-
Manufactured by CECO Environmentalbased in USA
The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. ...
-
Manufactured by CECO Environmentalbased in USA
Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support ...
-
Manufactured by Schock Manufacturingbased in USA
Schock can custom design Inlet ducting and plenums to meet your acoustic and inlet flow requirements. We can design using internal or external ...
-
Manufactured by Schock Manufacturingbased in USA
We will optimize your Inlet silencers to be effective and cost efficient. We primarily use 304 Stainless Steel materials so that corrosion does not become a ...
-
based in USA
GT PRO® automates the process of creating a combined cycle or gas turbine cogeneration plant design, guiding the user to rapidly and easily attain an optimal configuration and technical parameters. The user inputs design criteria, starting with the big picture and progressing in a logical sequence into greater details. Built-in expert ...
-
based in USA
and control set-points are all initialized upon importing its GT PRO design. All these inputs may be adjusted and fine-tuned by the user. For example, the user may change the physical hardware of a heat exchanger within a HRSG, to make it match the specs provided by the HRSG’s vendor. As another example, the user may adjust a steam turbine nozzle ...
-
based in USA
PDETM (Plant Design Expert) is an intelligent shell that uses the GT PRO/GT MASTER design and simulation engines. PDE is a compact expert program, with built-in logic to create and configure suitable gas turbine power and cogeneration plants based on the user’s electricity and heat demands, site parameters, and constraints. It ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the engine, ensuring that the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you