Geothermal Cooling System Equipment
-
Manufactured by Dandelionbased in USA
Whether it’s a winter cold snap or a summer scorcher, the ground five feet below the surface maintains a constant temperature year round. This constant earth temperature is higher than average winter temperatures, and lower than average summer ...
-
Manufactured by Enertech Global, LLCbased in USA
Hydron Module Water-to-Water geothermal heating and cooling systems can deliver hydronic heat through radiant floor systems or forced air fans. Radiant heating and cooling creates a consistent room temperature with no moving air, eliminating the less comfortable aspects of forced air ...
-
Manufactured by EnergySmart Alternatives, LLCbased in USA
EnergySmart is a full service geothermal company. We can design, permit and install residential geothermal systems for your MA home. We have installed hundreds of geothermal heating and cooling systems in new construction and ...
-
Manufactured by Kupp Co., Ltdbased in SOUTH KOREA
interference between pipe and greatly improves the thermal efficiency of the geothermal cooling/heating system. ...
-
Manufactured by Taco Comfort Solutions - part of the Taco family of companiesbased in USA
Taco Freedom Flange ® fits all “00” Circulators and free you from scraped knuckles and jury rigged tools. Easy-On/Easy-Off and sweat designs, and two-piece bronze shut-off valves let you make quick work of pump installation and ...
-
Manufactured by Geothermal Design, Incbased in USA
Ponds with at least 10 feet deep water and a minimum half acre surface area make an excellent choice for a closed loop application. A pre-assembled heat exchanger made of polyethlyene plastic pipe is floated onto the surface of the pond, connected with an extended header, filled with a loop solution and submerged. Pond-coupled systems can ...
-
Manufactured by Geothermal Design, Incbased in USA
Where land space is more limited or no pond is available, vertical closed loop systems can be installed into the ground by utiliizing a drill rig which bores open a series of vertical shafts or bore holes. Two polyethylene coils connected at the bottom by a fusion U-Bend are pulled into each bore hole and then grouted closed. Each ...
-
Manufactured by Bostech Mechanical Ltd.based in CANADA
Our experts will come out to your home and do a no cost, no obligation consultation to see if a Geothermal System is right for you. They will do an energy analysis on your home and prepare a comparison report customized to your location. They also show pictures of the installation process from start to finnish and can provide references ...
-
Manufactured by Geothermal Design, Incbased in USA
Horizontal Closed Loop Systems are commonly installed using a backhoe which opens a trench 2 feet wide and 6 feet deep. Three rows of polyethylene pipe are installed into the bottom of the trench at 6 feet deep, covered by 2 feet of soil, and a second layer of pipe is installed at 4 feet deep. The entire trench is back-filled and the series of ...
-
Manufactured by Geothermal Design, Incbased in USA
If there is sufficient water quantity and water quality, the home’s water well can provide the water for both domestic household purposes as well as for the geothermal system. There will be a discharge of water to a drain, ditch, stream or ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you