Refine by
Geothermal Loop Equipment & Supplies
22 equipment items found
Manufactured by:Geothermal Drilling Solutions, LLC based inLombard, ILLINOIS (USA)
RIGINABOXtm is a one-person operable system that can drill and install a vertical loop field inside most basements, slab on grades or garages with a minimum ceiling height of 7’ – 0”. Exterior drilling can be done using the systems suitcase weights and earth anchors. It requires as little as 30” of access to yard area. ...
Manufactured by:Geotherm based inKyiv, UKRAINE
The COMB-2 manifold is a robust and adaptable solution designed specifically for managing two geothermal loops. Operating under a brine pressure of up to 5 atmospheres, this manifold ensures reliable performance even under demanding conditions, withstanding short-term pressure spikes up to 10 atmospheres. It functions efficiently in a wide temperature range from ...
Distributed by:Hole Products based inLittle Falls, MINNESOTA (USA)
Hole Products offers flush carts for flushing and removing air from closed loop geothermal systems. Flush carts are available to purchase or to ...
Manufactured by:GeoCool Heat Pump Systems based inChula, GEORGIA (US) (USA)
This kit will have all the parts and components needed to install a ground horizontal or slinky loop. If the loop needs to travel more than 100 feet to the loop field you may need extra pipe. Pipe going to and from the unit is not included. Can be purchased as a add-on option after travel distance is measured. ...
Manufactured by:Hydro-Temp Corporation based inPocahontas, ARKANSAS (USA)
This system proves to be one of our greatest achievements yet being the first residential and commercial variable-speed geothermal heat pump available anywhere, as well as being recognized as the highest rated closed-loop geothermal unit for 2013, 2014, 2015, and 2016 with EER's surpassing 49! Want unbelievably low electric bills? Look no ...
Manufactured by:GeoSmart Energy based inCambridge, ONTARIO (CANADA)
The Aerothermal air to water heat exchanger allows our NetZero heat pumps to use external air as source of energy, effectively turning NetZero Basic and Compact units into an air to water heat ...
Manufactured by:DeepRock Manufacturing Co. based inMarquez, ALABAMA (USA)
All the DR150 rigs feature a sliding tophead. With a press of a lever, the drilling motor assembly (the tophead) slides over to the left and gives completely clear access to the borehole for the winch. This is essential when installing the casing and pump into the finished well. The the winch sheave assembly at the top of the mast can be hydraulically extended to 21 feet for easy handling of ...
Manufactured by:Maritime Geothermal Ltd based inPetitcodiac, NEW BRUNSWICK (CANADA)
Using a standard geothermal ground loop, our high-temperature hot water heat pump (WC Series) delivers up to 160°F (70°C) hot water for high-temperature hydronic heating systems. We accomplished this by using a two-step system involving two refrigerant circuits and two compressors. ...
Manufactured by:Total Green Manufacturing (Mfg.) based inSt. Henry, OHIO (USA)
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Two-Stage Forced Air DX Heating and Cooling, Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Smart Logic Controller, Zoning Friendly Capabilities, Dual Fuel Friendly Controller, Enhanced Compressor Protection, 2 Stage Controller, ...
Manufactured by:Total Green Manufacturing (Mfg.) based inSt. Henry, OHIO (USA)
Standard Features: Refrigerant Based (Water-Free) Geothermal Heat Pump System, Single Stage Forced Air DX Heating and Cooling, Analog Electrical Controls, Commercial Off-The-Shelf Parts, Standardized Mechanical Refrigerant Controls, High-Efficiency Copeland Scroll Compressor, Compressor Protection Sensor, Closed Loop Geothermal Heat Pump, ...
Manufactured by:Geothermal Design, Inc based inFort Wayne, INDIANA (USA)
Horizontal Closed Loop Systems are commonly installed using a backhoe which opens a trench 2 feet wide and 6 feet deep. Three rows of polyethylene pipe are installed into the bottom of the trench at 6 feet deep, covered by 2 feet of soil, and a second layer of pipe is installed at 4 feet deep. The entire trench is back-filled and the series of 6 pipes is joined by a heat fusion process into 2 ...
Manufactured by:Geothermal Design, Inc based inFort Wayne, INDIANA (USA)
Ponds with at least 10 feet deep water and a minimum half acre surface area make an excellent choice for a closed loop application. A pre-assembled heat exchanger made of polyethlyene plastic pipe is floated onto the surface of the pond, connected with an extended header, filled with a loop solution and submerged. Pond-coupled systems can reduce excavation costs and provide a lower installation ...
Manufactured by:Geothermal Design, Inc based inFort Wayne, INDIANA (USA)
Where land space is more limited or no pond is available, vertical closed loop systems can be installed into the ground by utiliizing a drill rig which bores open a series of vertical shafts or bore holes. Two polyethylene coils connected at the bottom by a fusion U-Bend are pulled into each bore hole and then grouted closed. Each pipe is connected into a central extended header and into the ...
by:Underground Energy, LLC based inLancaster, MASSACHUSETTS (USA)
BTES is an improvement on conventional closed-loop ground source heat pump (GSHP) geothermal systems. The ground heat exchanger (GHX) array for a BTES system is designed and operated in a manner such heat is stored or abstracted seasonally, whereas conventional GSHP systems are designed to simply dissipate heat or cold into the subsurface. ...
Manufactured by:Geothermal Design, Inc based inFort Wayne, INDIANA (USA)
If there is sufficient water quantity and water quality, the home’s water well can provide the water for both domestic household purposes as well as for the geothermal system. There will be a discharge of water to a drain, ditch, stream or ...
Manufactured by:Total Green Manufacturing (Mfg.) based inSt. Henry, OHIO (USA)
Standard Features: Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Multi-Functional Capabilities, Two Stage Forced Air DX Heating and Cooling, Hydronic Radiant Heat Circuit, Eco-Friendly R-410A Refrigerant, High-efficiency Copeland Scroll Compressor, Commercial Off-The-Shelf Parts, Line Set Lengths (Up to 100 Ft. from Manifold to ...
by:Corix Group of Companies based inVancouver, BRITISH COLUMBIA (CANADA)
GeoExchange systems utilize a constant, renewable, and free energy source – the warmth that is naturally stored within the earth – to provide efficient heating, cooling, and domestic hot ...
Manufactured by:Total Green Manufacturing (Mfg.) based inSt. Henry, OHIO (USA)
Standard Features: Closed Loop Geothermal Heat Pump, Water-Free Copper Ground Loop, Hydronic Heating and Cooling, Heated & Chilled Water, Eco-Friendly R-410A Refrigerant, High-efficiency Copeland Scroll Compressor, Commercial Off-The-Shelf Parts, Line Set Lengths (Up to 100 Ft. from Manifold to Compressor), Stainless Steel Double Wall Plate ...
Manufactured by:G Stow PLC based inWallingford, UNITED KINGDOM
A geothermal ground source system is shown to be six times more efficient than conventional fossil fuel heating and cooling methods, with huge environmental advantages – by drilling a borehole into the ground and using geothermal energy, which is available everywhere, no fossil fuels are ...
Manufactured by:Fecon, Inc. based inLebanon, OHIO (USA)
The Fecon GL300 Geothermal Drill is a rubber track drill rig designed to meet the needs of the residential and small commercial geothermal industry. When it comes to drilling geothermal ground loops, crews want efficient access to the drill hole site, advanced drilling capabilities, and the ability to remove equipment with ...