Refine by
Head Turbine Equipment & Supplies
44 equipment items found
Manufactured by:Nautilus LLC based inGreenfield, MASSACHUSETTS (USA)
The Nautilus CMC Medium Head (CMC-MH) style turbine has been produced in the U.S. since the early 1900’s. This simple regulated Francis turbine is designed for heads of 3m to 12m and develops a maximum electrical output from 1,900 watts to 9.2 kw, depending on available ...
Manufactured by:Nautilus LLC based inGreenfield, MASSACHUSETTS (USA)
The Nautilus T Medium Head turbine has been manufactured for over 10 years. Many of these turbines are installed in the U.K. and the United States. The hydraulic design is based on a utility grade Francis turbine that is reduced in size and fitted with a trapezoidal section scroll ...
Manufactured by:Nautilus LLC based inGreenfield, MASSACHUSETTS (USA)
The regulated CMC Ultra Low Head turbine (CMC-ULH) operates in a similar power range as the 660-ULH in an open flume and produces up to 1500 watts. The CMC offers better part gate regulation and efficiency than the other cylinder gate Nautilus ...
Manufactured by:Nautilus LLC based inGreenfield, MASSACHUSETTS (USA)
The T Ultra Low Head turbine (T-ULH) is the most powerful open flume turbine built by Nautilus. This unregulated design produces from 500 watts to 3,300 watts with a head range from 1m to 3.7m. Often two or three units are installed to match streamflow variation or the T-ULH is installed in combination with the Regulated CMC. For ...
Manufactured by:Tecnoturbines S.L based inAlmoradí (Alicante), SPAIN
Water turbine designed and developed to generate energy from water resources through the use of natural water pressure jumps, up to 10 m. The innovative electrical power system allows you to adapt the turning speed to changes in flow, for maximum efficiency without the need for adjustable blades. The Hydro Low Head turbine was developed alongside ...
Manufactured by:Nautilus LLC based inGreenfield, MASSACHUSETTS (USA)
The 660 Ultra Low Head turbine (660-ULH) is a 150mm (6in) diameter Francis turbine with a bronze runner and bronze and stainless steel guide vane and gate assembly. It uses a water lubricated rubber bearing below water and heavy duty spherical roller bearings above water to support the shaft and pulley assembly. The turbine case ...
Manufactured by:Mavel a.s. based inBenesov, CZECH REPUBLIC
Head Range 1.5 to 6 meters (5 to 20 feet). Flow Range 0.15 to 0.4 cms (5 to 14 cfs). Power Output 5 to 20 ...
Manufactured by:Entec AG Consulting & Engineering based inSt Gallen, SWITZERLAND
The T15 crossflow turbine is the result of more than 30years experience in rural electrification projects in Nepal, Indonesia and other countries. About 600 T15 turbines are in operation world wide. T15 turbine design is offered by PT entec as a licence for diameter 300mm and 500mm covering most MHP potentials up to 250kW (300kW at ...
Manufactured by:Hidropower d.o.o. based inSpodnja Idrija, SLOVENIA
High peak efficiency Francis turbines for low head and spiral case turbines for medium to high head can be provided ...
Manufactured by:Hidropower d.o.o. based inSpodnja Idrija, SLOVENIA
High head Pelton turbines with excellent partial load performance:tenance free shaft seal ...
Manufactured by:A2S (Advanced Safety Solutions) based inAix en Provence Cedex 3, FRANCE
The motorized sirens are ultra powerful (power up to 140 dB at 1m). These warning sirens comply with the March 23, 2007 Order on the technical characteristics of the national warning ...
Manufactured by:VerdErg Renewable Energy Limited based inKingston upon Thames, UNITED KINGDOM
Tidal VETT is a patented bi directional VETT uniquely suitable for power generation from tidal flows such as estuaries and tidal channels because of its benign environmental footprint and competitive capital ...
Manufactured by:CINK Hydro - Energy k.s. based inSadov, CZECH REPUBLIC
Low-head, double-regulated Kaplan turbines. With compact structure and minimum requirements on excavation and civil works. Easily maintained, with long service life and high efficiency across the entire operation range (20% - 100% of design flow). Penstock-ready and available in four different layouts to suit the needs on every low-head dam or ...
Manufactured by:CINK Hydro - Energy k.s. based inSadov, CZECH REPUBLIC
Middle-head reaction turbine invented by James Bicheno Francis in 1848. Great for projects with constant flow, simplified design and two available layouts (vertical and ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
The cross-flow turbine is a type of impulse turbine. The design of this particular turbine was initially developed by Anthony Michell, an Austrian Engineer, in the early 1900’s. The idea was further developed by Donát Bánki, a Hungarian engineer, and even later it was improved upon again by Fritz Ossberger, a German ...
Manufactured by:WWS Wasserkraft GmbH based inNeufelden, AUSTRIA
The Francis turbine – also know as “excess pressure turbine” – is usually installed for medium heads of water and constant water quantities. This type of turbine mostly uses a steel spiral turbine, since there is often a tube line leading to the turbine at ...
Manufactured by:CINK Hydro - Energy k.s. based inSadov, CZECH REPUBLIC
High-head Pelton turbines brought to perfection. High efficiency (90% or more), no water hammer effect, increased safety of operation, stunningly simple installation and maintenance, minimal civil works, and three different layouts (vertical, horizontal and compact-vertical). ...
Manufactured by:Zeco Di Zerbaro & Costa & C. S.r.l based inFara Vicentino (Vicenza), ITALY
Classic solution for the exploitation of high water volumes and low heads, Kaplan Turbines benefit of high efficiency even with wide flow rate range, thanks to the runner and wicket gate regulation system. Zeco supplies Kaplan turbines both in vertical or horizontal solution, directly connected to the generator shaft or through the use of belts ...
Manufactured by:Vensys Energy AG based inNeunkirchen / Wellesweiler, GERMANY
The direct-drive system – all the advantages of gearless ...
Manufactured by:Canadian Hydro Components Ltd. (CHC) based inAlmonte, ONTARIO (CANADA)
Maximum output and control in higher head conditions. Specifically suited to high head hydro sites, CHC manufactures a range of conventional Kaplan turbines ranging in size from 500 mm to 3200 mm. Conventional Kaplan turbines feature adjustable turbine blades and wicket gates and are designed to optimize ...