heat and power equipment in Illinois

  • Premium

    GPE - Model 19140/13120 - Hydraulic Power Supply and Controller

    Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 PSI.

  • Premium

    GPE - Model 19111 - Hydraulic Power Supply

    The Model 19111 is a complete Hydraulic Pump Unit consisting of pump, motor, 30 gallon reservoir and necessary accessories. Designed primarily for hydraulic controller application, it can be used wherever hydraulic power is required.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Hydraulic Power Supply Product line

  • Inland Power Group - Power Generating Systems

    Electricity is an essential part of life at work and at home. Whether you require prime power when no utility is available, or stand-by backup power when your utility is temporarily unavailable, power generating systems from MTU Onsite Energy and GE's Jenbacher line offer quality and dependable power at a moment's notice. ...

    By Inland Power Group, Inc. Office in Carol Stream, ILLINOIS (USA).

  • thermolinePlus - Plate Heat Exchangers

    Perfectly chambered plate/gasket construction for high pressures of up to 63 bar. Six possible gap types (combined). Many years of experience in designing refrigerant equipment. NH3/CO2 cascade applications. Low refrigerant filling quantity/high power density. Cleaning at 50 bar possible

    By Güntner U.S. LLC. based in Schaumburg, ILLINOIS (USA). from Plate Heat Exchangers Product line

  • EcoSkid - Cooling /Heating Systems

    With the EcoSkid, the latest addition to our high energy efficiency Skids product range, Clauger aims at developing environmentally friendly equipment that is versatile and that has low energy consumption rates, in order to respond to the needs of the manufacturers.

    By Clauger Office in CHICAGO, ILLINOIS (USA). from Cooling /Heating Systems Product line

  • Vocgen - Gas Turbine Power Generators

    VOCGEN by Environment & Power Systems International are small scale, highly robust simple cycle industrial gas turbine power generators that cogenerate 0.560 MW(e) output power and an average 6.5MMBtu/hr high quality heat energy. When configured in combined heat and power (CHP) and VOC abatement applications, VOCGEN can achieve overall system ...

    By Environment & Power Systems International Office in Chicago, ILLINOIS (USA).

  • Waste Heat Recovery Boilers

    Indeck offers years of experience utilizing waste gases and recovering its energy in the form of steam. Steam generation is an ideal way to recover waste heat energy from these gases in a form most easily utilized. Enormous quantities of heat energy inherent in exhaust gases from various industrial processes can be recovered to reduce energy ...

    By Indeck Power Equipment Company based in Wheeling, ILLINOIS (USA). from Waste Heat Recovery Boilers Product line

  • Heaters And Heat Exchanger Coils

    Plating / pickling / rinsing anodizing / D.I. water / dyes acids / alkalies / cleaners and other aqueous solution. Material: SS, TI. Performance: Heaters.

    By Serfilco International Ltd based in Northbrook, ILLINOIS (USA). from Heaters And Heat Exchanger Coils Product line

  • Heatizon Radiant Heating Products

    Heatwave Systems LLC dba Heatizon Systems began making low voltage electric radiant snow melting, radiant in-floor space heating and radiant floor warming products over 27 years ago. As a pioneer in the area of electric radiant products, Heatizon Systems has been a trend setter for its industry. Heatizon Systems low voltage products utilize two ...

    By Kalb Corporation based in Oneida, ILLINOIS (USA).

  • Model SK 3212.024 - Wall Mounted Air/Water Heat Exchangers

    Output categories 375 – 5,000 W. For use in tough environments. Convenient mounting options and flexible water connection options. Partial or full internal mounting possible.

    By Rittal Corporation based in Schaumburg, ILLINOIS (USA). from Wall Mounted Air/Water Heat Exchangers Product line

  • EXPO Electric Drum and Pail Heaters

    Durable heaters install instantly with spring-loaded toggle clamp and spread heat over the entire heater surface.  Drum and pail heaters have internal fiberglass insulation (except LIMD55-115). Choice of three heating controls.  All are equipped with neon pilot light and 6´ power cord and are warranted for one year. Units are not moisture-proof or ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • Premium

    GIG Karasek - Thin Film Dryer

    Reliable solutions for solids load-currents to pourable products Also in the field of drying GIG Karasek provices a wide range of conventional dryer technologies. Get these systems in heat-sensitive products to their limits, the successful Thin Film Evaporator principle ensures gentle processes. Based on their wealth of experience and knowledge of ...

    By GIG Karasek GmbH Office in Chicago, ILLINOIS (USA). from Thin Film Dryer Product line

  • Fuel Fired & Electric Heaters

    The Vapor Power Superheater is a coil tube design, similar to our steam generators. Saturated steam enters at the inlet of the superheater, passes through a set of coils, and hot combustion gases envelop the entire tube surface to achieve very high heat transfer rates. Superheated steam leaves the superheater at the steam outlet manifold. The fuel ...

    By Vapor Power International based in Franklin Park, ILLINOIS (USA). from Fuel Fired & Electric Heaters Product line

  • Grieve - Inert Atmosphere Bench Furnaces

    Grieve standard Inert Atmosphere Bench Furnaces are specifically designed for heat treating applications requiring inert atmosphere protection. Inert atmospheres protect the work from oxidation even while being subjected to high temperatures. Five sizes to 2.0 cubic feet with temperatures to 2200°F. Precision microprocessor based temperature ...

    By Grieve Corporation based in Round Lake, ILLINOIS (USA).

  • Wabash - Gas Turbine Generators

    Wabash Power has over 60 years of experience in providing clients with exceptional power equipment. We stock a selective yet comprehensive range of gas turbine generators ranging from 200KW up to 100 MW.

    By Wabash Power Equipment Company based in Wheeling, ILLINOIS (USA). from Gas Turbine Generators Product line

  • Wachs - Model Grand LX-VMT - Valve Maintenance Trailers

    Grand LX (Diesel) - VMT: Twin turner valve maintenance trailer; includes Wachs 1,500 Ft/lb TM-7, Wachs 750 Ft/lb Extended Reach Valve operators and ruggedized HC-100 with GPS controller/datalogger. A Tier 4F compliant, Kubota 1.1L, I-3 4-stroke, liquid cooled, IDI diesel engine provides ample power for all contained functions, including an ...

    By E.H. Wachs based in Lincolnshire, ILLINOIS (USA). from Valve Maintenance Trailers Product line

  • Premium

    ACME - Model ES Series - Small Standard Electric Steam Superheaters

    ACME Electric Steam Superheaters are available for use with steam boilers as an auxiliary piece of equipment. Our superheaters are all custom made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating ...

    By Acme Engineering Prod. Ltd. Distributor in Elmhurst, ILLINOIS (USA). from Small Standard Electric Steam Superheaters Product line

  • Electric Hot Water Boilers

    Vapor Power electric hot water boilers are designed to provide fast, efficient, and economical hot water for heating and process through the use of electric resistance elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired water temperature. All boilers utilize ASME pressure vessels and all ...

    By Vapor Power International based in Franklin Park, ILLINOIS (USA). from Electric Hot Water Boilers Product line

  • Model STR - Electric Steam Boilers

    Vapor Power electric steam boilers are designed to provide fast, efficient, and economical steam for heating and process through the use of electric resistance elements. The boiler controls automatically energize/de-energize steps of elements to maintain the desired steam pressure. All boilers utilize ASME pressure vessels and all electrical ...

    By Vapor Power International based in Franklin Park, ILLINOIS (USA). from Electric Steam Boilers Product line

  • Dolmar - Model PC-6530 - Power Cutter

    Efficient and effective, DOLMAR power cutters cut throug the toughest materials while saving on time, energy and costs. Considered among the best on the market by experts in the fields such as construction, garden and acgriculture construction

    By Dolmar Distributor in Vienna, ILLINOIS (USA). from Power Cutter Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you