Only show results in Virginia? Ok

Heat Exchanger equipment

  • Premium

    GIG Karasek - Heat Exchangers

    Our comprehensive portfolio includes tubular heat exchanger with a pipe length up to 24m in various embodiments - from conventional exchangers to specialized equipment, tailored to customer requirements. Our experienced team works with modern weld- and roll Equipment and because of our in-house process Technology you can choose between exchangers ...

    By GIG Karasek GmbH based in Gloggnitz, AUSTRIA. from Special Process Equipment Product line

  • Premium

    ASTIM - Shell and Tube Type of Heat Exchanger

    A shell and tube type of heat exchanger consists of a shell with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Special Equipment & Vessels - Heat Exchangers Product line

  • Premium

    GE - Exhaust Gas Heat Exchangers (EGHE)

    Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised co

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Waste Heat Recovery for Ancillary Equipment Product line

  • Premium

    ASTIM - Pipe in Pipe Type - Tube Heat Exchanger (TTHE)

    Tube–tube heat exchanger (TTHE) is a low cost, vented double wall heat exchanger which increases reliability by avoiding mixing of fluids exchanging heat. They are manufactured as a fully-welded design, with removable end caps and insulated if requested.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Special Equipment & Vessels - Heat Exchangers Product line

  • Honeycombs - Heat Exchangers

    Our ceramic heat exchangers have been employed successfully in regenerative thermal oxidation, acting as an alternative to conventional fillings with ceramic bulk fill materials.

    By Porzellanfabrik Hermsdorf GmbH based in Hermsdorf/Thüringen |, GERMANY. from Heat Exchangers Product line

  • CorroHeat - Heat Exchanger

    Industrial plants in which the exhaust air is corrosive incur high energy costs due to the need for high rates of air change. Increased energy costs force us into saving and re-using energy.

    By AB Arex based in Valdemarsvik, SWEDEN. from Heat Exchangers Product line

  • Stokvis - Model Bare Plate - Heat Exchanger

    Compact Brazed plate heat Exchangers are one of the most efficient ways to transfer heat. They are designed to provide unparalleled performance with very low life-cycle cost. Choosing brazed technology for heating or cooling projects will bring many benefits, including savings in space, energy, and maintenance. Our CBEs are extremely compact ...

    By Stokvis Energy Systems based in Surrey, UNITED KINGDOM. from Heat Exchangers Product line

  • Votator II - Model Horizontal - Heat Exchangers

    For more than 60 years, Votator scraped surface heat exchangers have been replacing slow, inefficient batching operations with more uniform, controllable and repeatable continuous processing.  The Votator II incorporates the most popular features of the Thermutator and Votator lines, making it extremely easy to maintain. The Votator II and ...

    By F&H Food Equipment Company based in Springfield, MISSOURI (USA). from Heat Exchangers Product line

  • MEDIUM - Model T2 - Heat Exchanger

    AISI 316 Stainless steel plates.Stainless steel socket.Plates min. 9 – max. 65.

    By Varem S.p.a. based in Limena Padova, ITALY. from Plate Heat Exchangers Product line

  • HRS - Model G Series - Heat Exchanger

    The G series heat exchanger is a specially designed heat exchanger for thermal energy recovery from exhaust gases. Its design is based on the traditional K Series but with dimensions optimized for exhaust gas cooling applications. The G series has corrugated inner tubes, ensuring higher heat transfer ratios than smooth tube designs. This means ...

    By HRS Heat Exchangers based in Lorquí - Murcia, SPAIN. from Corrugated Tube Heat Exchangers Product line

  • Delta - Heat Exchangers

    Our steam-to-water and water-to-water heat exchangers represent the latest technology in performance.  All are designed for superb efficiency, low maintenance, long life and fitting into tight spaces. Understanding how important growing space is, Delta T’s heat transfer units use up to 80% less floor space than shell and tube models, ...

    By Delta T Solutions based in Temecula, CALIFORNIA (USA). from Greenhouse Heat Sources Product line

  • Heat Exchangers

    From pilot scale to commercial scale production, our custom fabricated heat exchangers provide the necessary heat transfer requirements, along with the corrosion resistance for the demands of your chemical or pharmaceutical production. Our alloy heat exchangers are constructed of Tantalum, Zirconium and Niobium and our exchangers with Silicon ...

    By Pfaudler India based in Mumbai, INDIA. from Heat Transfer Technology Product line

  • Platevarem - Model SMALL T1 - Heat Exchangers

    AISI 316 Stainless steel plates.Stainless steel socket.Plates 35

    By Varem S.p.a. based in Limena Padova, ITALY. from Plate Heat Exchangers Product line

  • Hydro Royal™ - Model HR 5 RA - Heat Exchanger

    Heat Exchanger: 100% Titanium Heat Exchanger. Min/Max Flow: 20/70 Gallons. Recommended Flow: 45 Gallons. Compressor: Scroll. Plumbing Size: 2'. Min Amps / Max Breaker: 37/40. Dimensions (Shipping): 31' x 31' x 38' (33' x 31' x 43'). Weight (Shipping): 218 Lbs. (253 lbs.).

    By Hydro Royal based in Bellevue, WASHINGTON (USA). from Models Product line

  • Flex Turbine - Model GT1300S - Heat Exchangers

    Integrating four (4) Flex Turbine GT333S into a single ISO container, the Flex Turbine® GT1300S provides a cost-effective energy solution for larger capacity energy projects. The Flex Turbine® GT1300S keeps the Flex Turbine® broad fuel flexibility, machine durability, and efficient full to part-power efficiency. Built-in redundancy ...

    By FlexEnergy Inc based in Portsmouth, NEW HAMPSHIRE (USA).

  • Kenics - Heat Exchangers

    Kenics® Static Mixer technology, available exclusively in Kenics® Heat Exchangers, offers the highest available coefficients for fast, uniform heat transfer. Capable of reliable operation in a wide range of process applications, including those in the polymer, plastic, and food and beverage industries, Kenics Heat Exchangers require less ...

    By National Oilwell Varco based in Dayton, OHIO (USA). from Kenics Product line

  • Heat Exchangers

    Heat exchangers are used for heating sludge before its recirculation into anaerobic digesters. The basic heat exchanger is a pair of concentric tubes; sludge flows through the smaller center tube, while water flows (in counterflow) in the annular space formed by the outside of the smaller pipe and the inside of the larger pipe. To increase ...

    By Progeco srl based in Brescia (BS), ITALY. from Digesters Ancillary Equipment Product line

  • Hydro Royal - Model HR 90 RA - Heat Exchanger

    Heat Exchanger: 100% Titanium Heat Exchanger. Min/Max Flow: 20/70 Gallons. Recommended Flow: 45 Gallons. Compressor: Scroll. Plumbing Size: 2'. Min Amps / Max Breaker: 36 /40. Dimensions (Shipping): 31' x 31' x 34' (33' x 31' x 39'). Weight (Shipping): 210 Lbs. (245 lbs.).

    By Hydro Royal based in Bellevue, WASHINGTON (USA). from Models Product line

  • Heat Exchangers

    EAS offers a great variety of heat exchangers for heating and cooling of air in ventilation systems and for industrial heating and cooling. All calculations are made in our own calculation programme CoilCalc which has been developed by EAS on the basis of more than 30 years´ experience with coil production. EAS' heat ...

    By Evapco Air Solutions a/s based in Aabybro, DENMARK. from Other Products Product line

  • Heat Exchanger

    Heat exchanger is used in the winterization (freezing-out) line and is intended to heat the product to increase the productivity of the filtration process. Apparatus is a cylindrical vessel with pipe coil. During circulation in the pipe coil the oil is heated from 6 ̊C up to 15 ̊C. The water is used as heating agent. Heat exchanger can ...

    By Metan FZCO based in Dubai, UNITED ARAB EMIRATES.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you