Refine by
Applications
- Turbulators for Gas Boilers
- Turbulators for Air Heaters
- Turbulators for Heat Exchangers
- Moving Bed Heat Exchangers for Cooling Biosolids
- Moving Bed Heat Exchangers for High-Efficiency Cement Cooling
- Heat Exchangers for Chemistry and Petrochemistry
- Heat Exchangers for Oil- and Gas Industries
- Heat Exchangers for Energy and Environmental Technology
- Conventional Power Generation Systems for Carbon-Negative Energy (CNE)
- Conventional Power Generation Systems for Fast Response, Peaking Power Plant/Black-Start Power Generator
- Conventional Power Generation Systems for Unlocking Resource Value
- Conventional Power Generation Systems for Zero Emissions Power Generation
- CHP Cogenerator Unit for Residential and Office Buildings
- Gas Engine and CHP Unit for Biogas Plants
- Gas Engine for Industry
- Turbulators for Biomass Boilers
- Spiral Heat Exchanger for Process Industries
- Hydrogen Fuel Cell System for Cars
- Fuel Cell System for Aviation Industry
Heat Exchangers Equipments Equipment & Supplies
343 equipment items found
Manufactured by:Sodistra based inCHÂTEAU-GONTIER, FRANCE
As a result of this selection of heat exchangers a large choice of combinations is possible. Sodistra chooses its suppliers on the basis of strict specifications with the objective of "Zero after-sales ...
Manufactured by:Technosystem Engineering Sp Ltd based inPlovdiv, BULGARIA
We manufacture custom made heat exchange equipment made of carbon or stainless steel. Product specifications vary depending on customers requirement, but some general characteristics can be found ...
Manufactured by:Aviteq Vibrationstechnik GmbH based inHattersheim, GERMANY
AViTEQ-vibrating heat exchanger are used in a number of processes in which bulk solids have to be cooled, heated, dried etc. These special-purpose units are able to perform the heat exchange process during transportation. Usually, this occurs indirectly through the use of double bottoms to accommodate the heat exchange medium (oil, water, air, etc.). AViTEQ heat exchangers are employed in ...
Showcase
Manufactured by:FARM2000 - M & K Products (Bromsgrove) Ltd. based inDodford, UNITED KINGDOM
FARM2000 High Temperature (HT) boilers are used for heating, hot water and hot air systems by efficient and controlled combustion of biomass. Biomass contain gases which represent half of the calorific value, and which can only be burned and release their energy at high ...
Premium
Manufactured by:Bionomic Industries Inc based inMahwah, NEW JERSEY (USA)
Efficiently recover valuable waste heat BTU’s from hot gases to heat water or other liquids the direct contact way with a QSense Heat Exchanger. An optimal solution to reduce energy consumption and save on expensive fuel costs, while at the same time cleaning the flue gas contaminants and reducing the exhaust temperature. ...
Manufactured by:Shanghai Heat Transfer Equipment Co., Ltd based inJinshan, CHINA
Advantages: T&P fully welded plate heat exchanger is a kind of heat exchange equipment combining the advantages of plate heat exchanger and tubular heat exchanger. It offers the benefits of plate heat ...
Manufactured by:FAMET S.A. based inKędzierzyn-Koźle, POLAND
FAMET owns a long years experience in design and manufacturing of modern and reliable heat exchange equipment. FAMET GROUP companies specialize in deliveries of shell and tube heat exchangers consistent with design and technological requirements indicated in TEMA standards. Besides refineries, petrochemical and ...
Manufactured by:KELVION INC. / PHE based inYork, PENNSYLVANIA (USA)
Most of the industrial processes require heat exchanger equipment and miscellaneous pressure vessels. The great variety of industrial processes and applications require a wide capability of performing complex thermal and mechanical design as well as the capacity and experience in manufacturing heavy equipment made of special ...
Manufactured by:Kodiak Group based inGrayling, MICHIGAN (USA)
Escher designs and manufactures recuperative heat exchangers and gas stream coolers for use in iron melting cupolas, glass melting, and other high energy use applications. Escher heat exchange equipment has been in use since 1956 and has earned a worldwide reputation for quality. Their recuperators capture energy ...
Manufactured by:Torq N Seal, a company of JNT Technical Services, Inc based inLittle Ferry, NEW JERSEY (USA)
The TORQ N' SEAL high pressure heat exchanger tube plug is designed to provide a versatile and user-friendly solution for sealing tubes in heat exchangers experiencing leaks. Suitable for a wide range of tube IDs ranging from .250” to 2.500”, these plugs can withstand pressures up to 7,000 psiG, demonstrating their ...
Manufactured by:Capital Coil & Air based inWest Chester, PENNSYLVANIA (USA)
Capital builds replacement tube bundles for water/water exchangers and steam/water exchangers. We can duplicate the bundle diameter, length, tubesheet, and bolt hole pattern. You slide the old bundle out and slide the new bundle in without a lot of extra work on the jobsite. Special materials are available for high pressure steam, boiler water, or high ...
Manufactured by:Ambica Boiler Private Limited based inAhmedabad, INDIA
Ambica - Heat Exchanger ...
Manufactured by:Wilk-Graphite GmbH based inLörrach, GERMANY
Sulfuric Acid Dilution Cooler for the dilution of sulphuric acid the unit is divided into two parts. In the upper part the acid gets mixed, diluted and distributed. This part consists of PTFE impregnated graphite and a two layer special mixing area for optimised mixing results. The lower part is a standard circular block heat exchanger unit used as a ...
Manufactured by:Ekoterm 2001 based inKragujevac, SERBIA
Liquid for filling only the latest generation of thermal systems: "Ion Master" and "Comfort Ion Master" (systems with heat exchangers - the primary systems). The concentration of the liquid works depending on the type of boiler located in the thermo block system (a specific concentration for each type of boiler). The customer order must specify the exact type of boiler that requires liquid ...
Manufactured by:Calderería López Hermanos, S.A based inPaterna, SPAIN
Calderería López Hermanos designs and manufactures heat exchangers in steel and stainless steel of different calibres. Our exchangers are designed to cater for the customer’s requirements and specifications to ensure maximum customer ...
Manufactured by:Wilk-Graphite GmbH based inLörrach, GERMANY
For the dilution of sulphuric acid: the unit is divided into two parts. In the upper part the acid gets mixed, diluted and distributed. This part consists of PTFE impregnated graphite and a two layer special mixing area for optimised mixing results. The lower part is a standard circular block heat exchanger unit used as a cooler. This unit is used to reduce the concentration of sulphuric acid ...
Manufactured by:U.S. Titanium Industry Inc. (USTi) based inBaldwin Park, CALIFORNIA (USA)
Easy to use and lightweight. Cleans easily with no oxidation, no bacterial formation, and contains cultivation with a bacteria free layer. It’s safe to use and performs well during long term cooking in high temperatures. Lifetime ...
Manufactured by:Ekstroms Varmetekniska AB based inAlvsjo, SWEDEN
Many years of experience over a wide range of applications enables us to develop and optimise tailor made Economisers for all forms of combustion processes and associated fuels. The economisers of Ekströms Värmetekniska AB design are manufactured and delivered in accordance with our customers’ requirements, and are shipped either as loose components suitable for on-site assembly ...
Manufactured by:DSD Chemtech GmbH & Co. KG based inCologne, GERMANY
TheMonPlex™ Heat Exchangeris compact and available in both cross flow and counter flow configurations. This modular design offers the most flexible and efficient flow ...
Manufactured by:HEXONIC Sp. z o.o. based inWarszawska, POLAND
HAD shell and coil heat exchanger is a fully equipped, installation-ready kit consisting of an exchanger, mount and ...