Heat Recovery Equipment Near Yukon
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive ...
-
based in CANADA
Although the concept has been around for well over 100 years, many smart decision-makers are taking a second look at district energy. Its centralized production and distribution of heating and cooling provides an economical, scalable, eco-friendly, and smart solution to many needs within a building complex, neighborhood, or community. Corix ...
-
Manufactured by International Composting Corporation (ICC Group)based in CANADA
ICC’s Modular Energy System ('MES') are designed to convert organic waste from food, yard & garden, wood, construction and demolition, etc., into Green Energy (heat & electricity). The conversion from waste to energy takes place through a series of ...
-
Manufactured by SHARC International Systems Inc.based in CANADA
The SHARC system exchanges energy with wastewater that would otherwise flow down the drain. The result is a limitless supply of thermal energy available for space conditioning and domestic hot water heating. The SHARC is suitable for multi-unit residential, commercial buildings, and district energy ...
-
Manufactured by Inproheat Industries Ltd.based in CANADA
Inproheat Industries offers Compact Welded heat exchangers from Tranter and Nexson. These heat exchangers are defined by an assembly of plates that are usually washboard-patterned-embossed or herringbone with almost all of the design material being involved in the heat transfer process. Every other plate is turned 180°, which causes the ...
-
Manufactured by Westland Environmentalbased in CANADA
The incinerator’s capacity is dependent on waste composition: Incineration Capacity: The higher the heating value of the waste, the lower is the capacity in terms of kg/h that can be incinerated. This can be explained by noting that waste that has a higher heating value requires more air per unit of mass to incinerate than does ...
-
based in USA
Our D400 and D600 type steam turbines primarily support F-class and H-class gas turbine plants. They were developed for high-efficiency power generation at larger single-shaft or multi-shaft plants and for sites with low to very-low exhaust pressure. The D type steam turbines feature a combined high pressure (HP)/intermediate pressure (IP) section and either one or two double-flow low pressure ...
-
Manufactured by Inproheat Industries Ltd.based in CANADA
Inproheat Industries offers plate and frame-gasketed heat exchangers manufactured by Tranter. The efficiency of plate and frame-gasketed heat exchangers is based on the flow directions and the plate pattern angles, which must be carefully calculated to achieve the necessary turbulence, temperature, and pressure drop. The closer the heat ...
-
Manufactured by Aritermbased in SWEDEN
The BioComp series is a new generation automatic bio heating boiler for use with wood pellets. The fire chamber of the BioComp boiler has been designed with a new round structure which improves heat recovery and energy ...
-
Manufactured by Nexterra Systems Corp.based in CANADA
Nexterra’s core technology is a fixed-bed updraft gasification system. These systems range in output from 2 to 40 MWth (8 to 140 MMBtu/hr) and 2 – 15 MW electric. Nexterra’s systems are simple in design, are able to handle a wide-range of feedstocks and produce very low ...
-
Manufactured by Rentech Boiler Systems, Inc.based in USA
Rentech’s cross flow HRSG is a compact design, engineered to fit in almost any footprint. These units can be provided in multiple gas flow configurations, adding to the design flexibility. Tube arrangements can be staggered or inline to maximize heat transfer and to minimize draft losses for maximum efficiency. Our cross flow boilers ...
-
Manufactured by Intercontinental Truck Bodybased in CANADA
insulation, fire supression systems, heat recovery systems, sub-base and day tanks, and sophisticated electronics. ...
-
Manufactured by TRAK International Green Energy Resources Inc.based in CANADA
Since 2003, TRAK's Heat Pumps had been limited to our design-build cleantech solutions that reduce energy consumption, CO2 emissions and operating costs. In 2018, TRAK began directly selling its heat pump modules to support any project. ...
-
Manufactured by TRAK International Green Energy Resources Inc.based in CANADA
TRAK Smart Energy Systems (SES) optimally integrate Onsite Electricity Generation, Heat Recovery and Thermal Storage to deliver and sustain ideal environments and improve production processes. SES use relevant energy techniques that include GeoExchange, Centralized Heat Pumps, Internal and Exhaust Heat Recovery, ...
-
Manufactured by Solex Thermal Sciencebased in CANADA
Powering the next generation of energy capture, storage and recovery. The energy sector is undergoing massive and exciting changes, with new renewable and alternative energy technologies becoming increasingly mainstream. With these innovations come new problems to be solved, from the need to reduce costs and improve commercial ...
-
Manufactured by Cleaver-Brooksbased in USA
The CBCW is the newest addition to the Cleaver-Brooks IWT family. Designed with a 100% membrane water-cooled furnace, this boiler system includes a high-efficiency boiler and burner, heat recovery economizer, advanced control system, and complete exhaust stack, ducting and platforms. All available at shortened lead times and includes ...
-
Manufactured by Cleaver-Brooksbased in USA
The Cleaver-Brooks Max-Fire boiler incorporates an integral furnace in a single shop-assembled package heat recovery steam generator (HRSG) that combines a furnace and evaporator and superheater, if applicable, with a natural circulation design. Capable of steam flows up to 500,000 lb/hr, the Max-Fire Series is offered in two different ...
-
Manufactured by Cleaver-Brooksbased in USA
The ProFire SBR-30 series is designed for a variety of boiler types such as firetubes, and watertubes. Capable of less than 30 ppm NOx emissions without FGR, the SBR-30 series features a unique firing head design to achieve controlled combustion leading to low emissions with 3% O2. Advanced technology allows the SBR-30 series to offer low-NOx, low CO emissions and up to 10:1 turndown on natural ...
-
Manufactured by Cleaver-Brooksbased in USA
Leveraging our extensive experience and expertise in heat and mass transfer to supply custom waste heat recovery units for turbine exhaust, process furnaces and other heat sources for water, glycol mixtures and thermal oil fluid heaters. Waste Heat Recovery Units (WHRUs) are available in ...
-
Manufactured by John Cockerill Groupbased in BELGIUM
Heat recovery steam generators constitute a key element in the energy performance of electric power plants. They are also at the heart of our history. To design and propose innovative heat recovery steam generators solutions, John Cockerill Energy is able to combine over 200 years of expertise with its desire to conceive the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you