Refine by
Hydraulic Drive Motor Equipment & Supplies
18 equipment items found
Manufactured by:Chance Foundation Solutions based inCentralia, MISSOURI (USA)
Type: Anchor/Pile Installation Tools. Dimensions: Weight-246.00 ...
Manufactured by:Advanced Sawmill Machinery Inc. (ASM) based inHolt, FLORIDA (USA)
Simple installation and minimal electronic controls, the articulating press rolls lift the lumber, positively indexing each board for smoother operation. Hydraulic drive eliminates bulky electric motors, gearboxes and hazardous drive ...
Manufactured by:NAF Neunkirchener Achsenfabrik AG based in
This directly driven planetary steering axle – by a hydro or electric motor – was developed for airfield vehicles (GSE) and mining machines, as it offers maximum reliability at high load ...
Manufactured by:SeaQuest Systems based inKillybegs, IRELAND
We manufacture a wide range of cable winches from 500kg pull upwards. All SeaQuest Cable Winches are fitted with direct-drive motors and brushless high-specification slip-rings, so when the winch is turning the signal is not ...
Manufactured by:RECK-Technik GmbH & Co. KG based inBetzenweiler, GERMANY
With special attachments for front loader, wheel loader, telescopic loader or excavator. The radial piston motor can be used with a volume flow up to 170 l /min and 250 bar. Lengths of the mixer rod are available from 4m to ...
Manufactured by:KRACHT GmbH based inWerdohl, GERMANY
Hydraulic Fan Drive Motors KM Functions KM 1 „space optimized” proportional valve and reversible unit KM 1 “standard” proportional valve and reversible unit KM 1 “space optimized” proportional valve KM 1 “standard” proportional valve KM 1 thermostatic valve and pressure relief valve KM 1 thermostatic valve and pressure relief valve with ...
Manufactured by:DODA Costruzione Macchine Agricole based inBuscoldo, ITALY
Similar to BG 80 series, it differs from it mainly for 2 aspects: this mixer can be equipped with electric motor complete with toothed belt or with a 500 RPM hydraulic motor; the drive line is tied up to frame with hydraulic pistons through a double joint which allow both vertical and horizontal ...
Manufactured by:Flight Dental Systems based inBrampton, ONTARIO (CANADA)
The Flight A6 Radius offers a hybrid model patient chair using both electric motors and hydraulic motors to drive the chairs movement. The Backrest is controlled with a reliable and robust Linak Actuated motor and the base up/down movement is controlled by a strong Fine Sinter Hydraulic ...
Manufactured by:API Heat Transfer Inc based inBuffalo, NEW YORK (USA)
API Heat Transfer’s full line of Thermal Transfer Products standard mobile oil coolers is proven to stand-up in some of the toughest off-road environments. Our oil coolers are available with a wide variety of standard options to best suit each application and offer maximum ...
Manufactured by:Maxi Mill, Inc. based inAlbany, OREGON (USA)
DC Carriage drives designed for your specific application. Horse power options from 50 HP to 300 ...
Manufactured by:Machinefabriek van de Weert b.v. based inHelmond, NETHERLANDS
The Wire cutter machine is used in the prefab floor and element production. The machine is provided with a hydraulically driven XYZ unit on which a grinder blade is mounted. Standard grinder blades can be used on the machine, also the machine is provided with a powerful vacuum system which is directly connected to the grinder blade. By using this vacuum system all grinding- and concrete dust will ...
Manufactured by:Convey-All Industries - Meridian Manufacturing Inc. based inWinkler, MANITOBA (CANADA)
This 1600 series of high capacity tube conveyors are equipped with a 10" tube and a 16" belt. The Belt width increases the capacity with a fuller tube and less roll back. They move product fast and efficiently. The conveyor is available in a multitude of lengths, to match your needs perfectly. Use the conveyor inside or outside, transportable, or in a permanent ...
Manufactured by:Convey-All Industries - Meridian Manufacturing Inc. based inWinkler, MANITOBA (CANADA)
This 2200 Series of high capacity tube conveyors is equipped with a 14" tube and a 22" belt. The extra Belt width increases the capacity with a fuller tube and less roll back. They move product fast and efficiently. The conveyor is available in a multitude of lengths to match your needs perfectly. Use the conveyor inside or outside, transportable, or in a permanent ...
Manufactured by:Tarmac International, Inc. based inLees Summit, MISSOURI (USA)
Cold Feed: Single bin powered by hydraulic motor Conveyor To Dryer: Slinger with hydraulic motor Counter Flow Dryer: 5’ x 22’ kiln with trunnion drive and hydraulic motor, Burner and controls Oxidizer: Burner, oil-fueled, with controls Baghouse: 6,000 ACFM Soil ...
Manufactured by:Linn-Pumpen GmbH based inSchalksmühle, GERMANY
Self-priming external gear pumps are designed for industrial applications. Positive displacement pumps with a wide range of capacities. Suction- and pressure-connections Whitworth pipe threads - opposite 180° (Series D5xx also available with ...
Manufactured by:China Deyuan Marine Fitting Company Limited based inZhuhai, CHINA
It can be designed and manufactured according to users’ requirements. Optional solutions are: power - electric motor-hydraulic drive, diesel engine-hydraulic drive and variable-frequency drive. Drive mode – pin or rack-and-pinion. Movement mode – intermittent or ...
Manufactured by:AW-Energy Oy based inVantaa, FINLAND
The back and forth movement of water driven by wave surge puts the WaveRoller panel into motion. To maximize the energy that the WaveRoller panel can absorb from the waves, the device is installed underwater at depths of approximately 8 – 20 meters, where the wave surge is most powerful. A single panel absorbs 1.5-2 MW of power from the wave surge. The panel spans essentially the entire ...
Manufactured by:AW-Energy Oy based inVantaa, FINLAND
WaveRoller is a device that converts ocean waves to energy and electricity. The machine operates in near-shore areas (approximately 0.3-2 km from the shore) at depths of between 8 and 20 meters. It is fully submerged and anchored to the seabed. A single WaveRoller unit (one panel) is rated at between 500kW and 1000kW, with a capacity factor of 25-50% depending on wave conditions at the project ...