Showing results for: Hydropower Equipment In Asia & Middle East
-
PremiumManufactured by Dragflow S.r.l.based in ITALY
Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...
-
Manufactured by Jiangxi Huawu Brake Co., Ltd.based in CHINA
SBHA series hydraulic power units are mainly applied to the matched drive of SB/SBD series safety brakes and other single-acting cylinders. One kind of hydraulic power units shall be used for safety brakes when after the type of this hydraulic power unit where add a suffix/1, which can be used to control the releasing and closing of brake at the same time; other kinds of hydraulic power units ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
-
Manufactured by Tri Tool Inc.based in USA
The Model 757RSS (remote start/stop) Hydraulic Power Supply is a variable volume (0 GPM to 12 GPM), pressure-responsive (0 to 1800 PSI), reversible-flow power unit for supplying hydraulic power to cutting and weld end preparation pipe lathes with integral hydraulic motors. A low voltage (24 volts) pendant provides start/stop control. The pendant allows operation up to 100 feet away from the power ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
-
Manufactured by Tri Tool Inc.based in USA
The Model 765 Remote Volume Control Hydraulic Power Source is variable-volume (0 GPM to 15 GPM), pressure-responsive (0 to 1800 PSI), reversible-flow power unit for supplying hydraulic power to cutting and weld end preparation pipe lathes with integral hydraulic motors. A low voltage (24 volts) pendant provides stop, start, volume control, and forward/neutral/reverse flow direction control. The ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
Hydroman™ hydraulic power pack can be electric motor driven or diesel engine driven. Best option is to use diesel engine driven in order for the whole setup to be used on construction sites without electricity supply. By using hydraulic drive slurry pumps, the maximum torque can be applied through the full speed range of the slurry pump. This is very useful in the applications such as heavy ...
-
Manufactured by Visco Engineersbased in INDIA
In the series of our products, we are also engaged in offering a wide range of light weight, movable Hydraulic Power Pack Machine to meet the demands of our customers. These machines are highly durable and are easy to operate. Our power packs are available in electric driven and diesel/petrol engine ...
-
Manufactured by Shand & Jurs (L&J Technologies & L&J Engineering)based in USA
Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 ...
-
Manufactured by Ranjit Hydraulics Engineers (Regd.)based in INDIA
Our organization is offering Hydraulic Press Machine to our clients. The sturdy construction of all presses guarantees stability and durability. The press is provided with a 2- stage hand pump. The low pressure pump is used for rapid advance of piston at pressure. The high pressure Pump is provided with a special material lining and is used for slow advance at high pressure. The winch provided ...
-
Manufactured by Taizhou Chuanhu Hydraulic Machinery Co., Ltd.based in CHINA
This pump has a variety of operation modes such as semi-automatic, full-automatic, and manual. It operates quickly and has high efficiency. It is the latest and most advanced gasoline-driven hydraulic pump on the market. The oil storage capacity is 10L, which can withstand a large amount of work, even if it works for a long time, it will not cause the engine to overheat. This hydraulic pump can ...
-
Manufactured by Rpmtech Co., Ltd.based in SOUTH KOREA
RPMTECH's DHP Power Cylinders are Electro-Hydraulic Power Cylinders built for damper valves. The DHP Power Cylinder is a compact, all-in-one solution that is capable of advanced control modes and supports various types of installation for maximum versatility. The actuators do not require a gearbox (the cause of many breakages) allowing for direct and efficient delivery of power for reliable ...
-
Manufactured by Rpmtech Co., Ltd.based in SOUTH KOREA
RPMTECH's MHP Power Cylinders are Electro-Hydraulic Power Cylinders built for damper valves. The MHP Power Cylinder is a compact, all-in-one solution that is capable of advanced control modes and supports various types of installation for maximum versatility. The actuators do not require a gearbox (the cause of many breakages) allowing for direct and efficient delivery of power for reliable ...
-
Manufactured by Joint-Stock Company `Tyazhmash`based in RUSSIA
Hydraulic turbines for Ust-Khantaiskaya HPP, Kurejskaya HPP, Serebrjanskaya HPP, Teriberskaya HPP are performed in northern variant. The turbine for Nizhne-Teriberskaya HPP is manufactured with usage of the materials, resistant to marine ...
-
Manufactured by Taizhou Chuanhu Hydraulic Machinery Co., Ltd.based in CHINA
The oil-filled pressure gauge can display the real-time working pressure of the pump, avoid damages from overloading. Two-speed hydraulic pump. Fuse: to protect the motor and machine safety while power overloading. Memory: an internal memory device is equipped to indicate the times of use, provide reference data for maintenance. It must change the hydraulic oil at least one time in a year, and ...
-
Manufactured by Shandong Storike Engineering Machinery Co., Ltd.based in CHINA
Model Number: ST13-30. Type: Hydraulic Power Units. Power: 13hp. Brand Name: Storike. Warranty: 1 Year. Quantity flow of Hydraulic oil: 20-30LPM. Lubricating oil capacity: 1.1L. Hydraulic oil capacity: 12L. Fuel tank Capacity: 6.5L. Maximum pressure: 155BAR. Speed: 3600rpm. Rate of fuel consumption: 313g/kWh. Weight:80KG. Working Weight: 115KG. Engine Model:HONDA GX390. Place of ...
-
based in ICELAND
Principal Particulars: Drilling depth theoretical: 1800 m. Year of construction: 1998. Trailer mounted hydraulic powered topdrive drilling rig, Drillmec - G102. Geothermal drilling rig. Not suitable for oil and gas drilling. Pull-Back Capacity, 100.000 kg. Loads, in Transport 30-40. Drilling Crew per shift: 6. Rig mechanic: ...
-
Manufactured by Hebei Tobee Group Co.,Limitedbased in CHINA
ydroman™ TQSY Hydraulic Slurry Pump with Diesel Power Pack is specifically designed for handling slurries with a high content of abrasive solids. The hydraulic submersible pumps have been extremely successful for clients operating in specialized sectors who face severe conditions and solve very difficult applications. The TQSY hydraulic slurry pumps are positioned as submersible dredge pumps for ...
-
Manufactured by Shanghai Rongde Mechanical and Electrical Equipment Co., Ltd.based in CHINA
The hydraulic pump station provides continuous operating pressure to the remote control valve connected to it. It is mainly composed of four parts: fuel tank, hydraulic pump, accumulator and control box. The volume of the tank is determined by the sum of the capacities of all the drives connected to the hydraulic pumping station. The accumulator is determined by the capacity required to operate ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you