hydraulic power equipment equipment in Europe

  • Premium

    Hilliard BrakeBoss - Model BBH2 - Brake Control System

    The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet ...

    By Hilliard Corporation Office in Duesseldorf, GERMANY. from Brake Control System Product line

  • Premium

    Hilliard BrakeBoss - Model BBH3 - Advanced Brake Control System

    The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise ...

    By Hilliard Corporation Office in Duesseldorf, GERMANY. from Advanced Brake Control System Product line

  • Premium

    AMS - Model 9580-VTR - Auger and Hammer System PowerProbe

    The New 9580-VTR PowerProbe™ is powered by a tier 4, 60 HP John Deere liquid-cooled diesel engine, and has an increased diesel fuel storage to 30 gallons. The new auger and hammer system has hydraulic pivot and locking systems, and the hammer, auger motor, winch, and auto-drop can all be positioned over the same borehole without realigning ...

  • Dragflow - Model 40 - 800 l/min - 24 - 490 kW - Hydraulic Power Pack

    Our hydraulic power pack, suitably sized for the pumps and cutters, can also be designed to drive hoist, winches and auxiliary equipments. Components and Preferred brands: Diesel Engine: IVECO or CATERPILLAR. Electric Engine: SIEMENS. Hydraulic Pumps: Rexroth.

    By Dragflow S.r.l. based in Villafranca, ITALY. from Hydraulic Power Pack Product line

  • Turbines

    For more than 100 years, Voith Hydro has developed, built and installed hydraulic machines for the development of hydro power. During this time, Voith Hydro has contributed significantly to the advancement of many types of hydro turbines. Voith is one of the world’s leading suppliers of hydraulic machines. Thousands of installed hydro power ...

    By Voith GmbH based in Heidenheim, GERMANY. from Turbines Product line

  • Model Z552 - Stationary Wrapper

    Z552 stationary wrapper is intended to be used as stationary equipment. It is connected to the tractor using a 3 point mounting system. It is powered by the hydraulic motor of the tractor pump. It is equipped with a 500 mm film pre-stretcher. Metal-Fach’s long experience in bale wrapper production guarantees a long and break free life of the ...

    By METAL-FACH Sp. z o. o based in Sokółka, ul., POLAND. from Stationary Wrapper Product line

  • Model WP6 - Vertical Mix Wagon

    Vertical augers with nettling knifes. Hydraulic steering system for mechanisms. Hand-brake. Power take off shaft (PTO). Ladder

    By METALTECH Sp. z o.o. based in Mirosławiec, POLAND. from Vertical Mix Wagon Product line

  • STI - Model CMV - Control Drive Large Enclosed Actuator

    CMV actuator is able to control final elements of modern power stations (dampers, hydraulic converters, etc.) using high power actuators to develop torque up to 20.000 Nm. In this series, the housing provides a double function of protection and bearing frame. This system assures maximum stiffness without making use of additional supporting ...

    By STI S.r.l. based in Levate, ITALY. from Control Drive Large Enclosed Actuator Product line

  • Lamor - Model LPP 6 C75 - Hydraulic Power Pack Suction Pump

    The Lamor Power Pack LPP 6 C75 is used as a suction pump and a power source for Lamor skimmers and smaller hydraulically operated equipment. The Power pack represents a light-weight, easily portable power solution for hydraulic equipment that can be operated in remote locations.

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Hydraulic Power Pack Suction Pump Product line

  • Tubular Conveyors

    Spirotech manufactures a large range of tubular conveyors driven by electric or fuel powered engines or by hydraulic systems. The conveyors can be assembled on a fixed truck or equipped with a monkey winch to change the discharging height.

    By Agritech s.r.l. based in Calvisano(Brescia), ITALY. from Tubular Conveyors Product line

  • NES - Containerised Mover

    The containerised version comes in a 20ft container certified for shipping. It has double doors at each end. Compartment 1- Machinery Room with double doors. Acoustic lined compartment fitted with a Diesel Driven Hydraulic power pack. Engine fitted with Spark arrestor, Chalwyn air shutoff valve and external Emergency stop. Hydraulic pump is a ...

    By Non Entry Systems Ltd based in Swansea, UNITED KINGDOM.

  • Storage Tanks with Sweeping Trays

    Ecoenergia company designs and supplies biomass steel tanks with sweeping trays. Tanks allow loading of biomass by traditional wheel loaders and have a capacity of 15 to 30m3. Tanks are equipped with a two-floor sweeping system (standard) powered by hydraulic actuators.

    By ECOENERGIA Sp. z o.o. based in Warszawa, POLAND. from Storage Tanks with Sweeping Trays Product line

  • NorLense - Hydraulic Power Units

    NorLense delivers a wide range of hydraulic power units tailor made for customer requirements. NorLense Power packs serves as a multipurpose unit designed for the flexible operation of a wide range of hydraulic operated oil spill clean-up equipment. NorLense can deliver from 35kW and up to 110 kW.

    By NorLense AS based in Strønstad, NORWAY. from Hydraulic Power Units Product line

  • Lamor - Model LPP 7 - Hydraulic Power Pack

    The Lamor Power Pack LPP 7 is used as a power source for the range of Lamor skimmers and smaller hydraulically operated equipment. The power pack represents a light-weight, easily portable power solution for hydraulic equipment that can be operated in remote locations.

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Hydraulic Power Pack Product line

  • Lamor - Model LPP 35 - Hydraulic Power Pack

    The Hydraulic Power Pack LPP 35 is used as a power source for skimmers and other hydraulically operated equipment such as boom reels, pumps etc. Equipped with 2 hydraulic circuits, the LPP 35 can power multiple pieces of equipment simultaneously (for example a skimmer and an oil transfer pump).

    By Lamor Corporation Ab based in Porvoo, FINLAND. from Hydraulic Power Pack Product line

  • Model C0 - 4 Blades Vertical Bar

    4 blades vertical bar (working cut of 1600 mm). Upper cutting bars with 2 blades (working cut of 800 mm). Hydraulic tilt adjustment with 1 piston. Hydraulic height adjustment with 1 piston. Upper bar hydraulic adjustment with 1 piston. Side bar (shifting) hydraulic adjustment with 1 piston. Antishock on vertical bar Special tempered 420 mm steel ...

    By VBC Company based in Colognola ai Colli (VR), ITALY.

  • Model DGK1 - Reversibility Hydraulic Regulation

    Reversibility hydraulic regulation. Hydraulic height adjustment with 1 piston. Hydraulic side adjustment with 1 piston. Hydraulic swinging adjustment with 1 piston. Cutting height 500mm. Powered by 2 hydraulics engines (it requires 150 bar pressure and 20 litres/min of oil). Pipes equipped. Working height from 600mm to 1100mm. Iron main frame. ...

    By VBC Company based in Colognola ai Colli (VR), ITALY.

  • Model EHM - Electro Hydraulic Orange Peel Grab

    Volume 5,0 m3, density 2,0 t/m3. Dead weight 8.000 kg. Motor output 45 kw. Voltage 400 v / 50 hz. Closing time 19,5 s. Opening time 11,5 s. Reversing operating system. Crane equipment necessary for power supply.

    By Orts GmbH Maschinenfabrik based in Sereetz, GERMANY. from Electro Hydraulic Orange Peel Grab Product line

  • Norcar - Model a6226 - Versatile Hydraulics Machine

    Norcar a6226 has the same compact design as the a6026, but with higher specifications as standard. Equipped with dual working hydraulic pumps, the machine is well prepared for attachments requiring high oil flow. Moreover, several functions can be used simultaneously without affecting each other, which makes work more efficient. The machine offers ...

    By Norcar-BSB Ab based in Nykarleby, FINLAND.

  • Model R1 DX-SX - Rake

    Hydraulic height adjustment with 1 piston. 3-controls distributor with variable speed drive. Pipes equipped. Iron main frame. Machine weight 150 kg. Hydraulic side adjustment with 1 piston. Powered by 2 hydraulic engines (it requires 150 bar pressure and 22 litres/ min oil).

    By VBC Company based in Colognola ai Colli (VR), ITALY. from Rake Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you