Hydroelectric Turbines Equipment
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
up to 10MW per unit. It has a very high degree of efficiency of more than 95 % and is an ubiquitously applicable turbine type. Foster Francis turbine is a complete set of hydroelectric generating units, including valve, governor, control system and ...
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
A turbine converts energy in the form of falling water into rotating shaft power. The selection of the best turbine for any particular hydro site depends on the site characteristics, the dominant ones being the head and flow available. Selection also depends on the desired running speed of the generator or other device loading the turbine. ...
-
Manufactured by Chengdu Forster Technology Co., Ltd.based in CHINA
Francis turbine definition is a combination of both impulse and reaction turbine, where the blades rotate using both reaction and impulse force of water flowing through them producing electricity more efficiently. Francis turbine is used for the production of electricity most frequently in medium or large-scale hydropower stations. These ...
-
Manufactured by Alstombased in FRANCE
Small standard hydro generators are defined as three-phase synchronous electrical machines for coupling to hydroelectric turbines - either with direct coupling type or via speed-up gear ...
-
Manufactured by ULMA Forged Solutionsbased in SPAIN
ULMA supplies forged blades to various sectors and for many different applications, such as blades for cooling fans in power generation plants, gas turbines, hydroelectric turbines, etc. Blade geometry and, in some applications, the materials used to manufacture the blades make their manufacture possible in only certain forges. ...
-
Manufactured by Fugesco Inc.based in CANADA
Radial type seals are used in hydroelectric turbines, pump-turbines and large pumps. The primary purpose of a mechanical radial shaft seal is to maintain a near watertight seal between the turbine shaft and the head cover. Depending on the pressure under the seal, two or more carbon segmented sealing rings are required. This seal ...
-
Manufactured by ATB Riva Calzoni SpAbased in ITALY
The Hydro Energia own hydroelectric Turbines technology is based on 25 years long experience in design and production of the main type of turbines such as: Kaplan, Francis and Pelton from 100 kW up to 40 MW, each ones with various setting according to the needs of our Costumers. In the last years almost 200 hydro units have been ...
-
Manufactured by I.I.A. Technologias Especializadas S.A.based in HONDURAS
IIA has engineering and expertises to create, design and implement the various turbines for hydroelectric projects , so we offer a complete package and ...
-
Manufactured by DLLD Power Limitedbased in CHINA
the parameters required, the power is monitored and that which is not used by the appliances is directed to an alternate load. The tubular turbine generator consists of three major components – a hydroelectric turbine, a generator and a control box with a built-in electronic load controller ...
-
Manufactured by DLLD Power Limitedbased in CHINA
the parameters required, the power is monitored and that which is not used by the appliances is directed to an alternate load. The tubular turbine generator consists of three major components – a hydroelectric turbine, a generator and a control box with a built-in electronic load controller ...
-
Manufactured by NuSTREEM LLCbased in USA
Our modernized kaplan turbine is a a modular, low-head hydroelectric turbine design for projects 75kW to 250kW depending on site needs that can also be combined & scaled to fit much larger site requirements (one sized turbine that can be used with multiple sized generators). The NuTURBINE is ideal for many applications, ...
-
Manufactured by Kirloskar Brothers Limited (KBL)based in INDIA
head and medium discharge. These turbines are the most preferred hydraulic turbines and are extremely reliable factotum of hydroelectric power stations. The turbines are able to sustain high mechanical stress resulting from high heads. KBL is a leading manufacturer of various proven & efficient models of Francis ...
-
Manufactured by Encosystbased in FRANCE
Our governors are developed on the basis of a PLC controller, which ensures the availability of specific spare part during the life time. Our regulators are in compliance with IEC-61362 and ...
-
Manufactured by DLLD Power Limitedbased in CHINA
This Tubular turbine generator unit is applicable to the low-head power station which has a head of less than 20m and the diameter of runner is less than 3m. With the merits of considerable and well-going flow, and high efficiency, this unit is perfectly suitable for developing water resources of low head and large flow in the areas of ...
-
Manufactured by ESPE Groupbased in ITALY
The hydraulic turbine is a machine that turns hydraulic energy into mechanical energy, with a conversion yield of approximately 90%. This mechanical energy is then converted into electrical energy by means of an alternator. ESPE turbines are directly engineered by our R&D Department. ESPE manages, checks and supervises the entire ...
-
Manufactured by DLLD Power Limitedbased in CHINA
The ZD series low head micro hydroelectric generators are designed for families in remote areas to product power for their households easily and inexpensively. Thousands of them has already installed throughout the world. ZD series are the perfect hydro turbine for slow moving rivers and streams. Small, natural waterfalls or dams provide the ...
-
Manufactured by DLLD Power Limitedbased in CHINA
XJ18-0.75DCT4 is an AC direct system consisting of a turbine-generator unit producing AC power which is used as needed. That is, it is fed directly to the appliances. No need for a battery and inverter, XJ18-0.75DCT4 offers a complete water-to-wire system with an integral Turgo turbine, generator, and valve flow control. Designed to deliver ...
-
Manufactured by DLLD Power Limitedbased in CHINA
XJ18-0.5DCT4 is an AC direct systems consisting of a turbine-generator unit producing AC power which is used as needed. That is, it is fed directly to the appliances. No need for a battery and inverter, XJ18-0.5DCT4 offers a complete water-to-wire system with an integral Turgo turbine, generator and valve flow control. Designed to deliver ...
-
Manufactured by DLLD Power Limitedbased in CHINA
XJ14-0.3DCT4 is an AC direct system consisting of a turbine-generator unit producing AC power which is used as needed. That is, it is fed directly to the appliances. No need for a battery and inverter, XJ14-0.3DCT4 offers a complete water-to-wire system with an integral Turgo turbine, generator, and valve flow control. Designed to deliver ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
It is widely used in hydro power stations with the head of 3--180 meters. With inclined jet turbine, the water flow output from nozzle flows along a certain angle of plane of rotation of the running wheel instead of flowing along the tangent of the turning wheel, and the water flow goes inside the blades from one side and goes out form blades ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you