Hydropower Water Equipment & Supplies
31 equipment items found
Manufactured by:Shenyang Getai Hydropower Equipment Co., Ltd based inShenyang, CHINA
Design for low head and large water flow hydropower station.Under the same water head, its specific speed is higher compared with the Francis turbine. Application water head is about 3-80m. Axial-flow turbine runner for Feng Huang ...
Distributed by:RenTech Global Solutions based inReno, NEVADA (USA)
This book "SMALL HYDROPOWER SYSTEMS” has been written according to the B.Sc., Renewable energy Management syllabus The subject matter had been discussed in 2 ch apters and sub units as under:chapter 1: introduction to Hydropower energy 2: Small Hydropower Systems. ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
Type: EXD(E) IIB ATEX. Output: 0,75kW – 355kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Framesize: 80–315. Protection: IP55. Temperature class: T4, T5. Cooling: IC411. Insulation class: F. Duty type: S1. Standards: IEC 60034-30-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V Δ – Motors ≥ 3 kW. Other voltages can be supplied on ...
Manufactured by:Suneco Micro Hydro Power based inDONGYING, Shandong, CHINA
Tubular turbine is widely used in a hydro power stations with the head of 2-30 meters. The blades are fixed or can adjust manually. The efficient turbine of this kind can produce a large quantity of water flow which passes ...
Manufactured by:Gilbert Gilkes & Gordon Ltd based inKendal, UNITED KINGDOM
The Pelton is an impulse type water turbine invented by Lester Allan Pelton in the 1870s. Peltons are the preferred turbine for hydro-power where the available water source has relatively high head at low flow rates. The jet(s) of water strike the splitter edge of the double bucket (runner) and is turned through an angle of nearly 180° before falling under gravity into the discharge channel or ...
Manufactured by:Pumptech AS based inStavanger, NORWAY
DYNASET HPW Hydraulic Power Washers and Water Pumps convert the hydraulic power of a mobile machine into high pressure water. HPW has the world’s best power-to-size ratio. The design is reliable and compact piston-to-piston structure with no rotating parts unlike traditional water pumps. There are models from 10 to 200 kW with up to 1600 bar and flows up to 300 ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
OMEC Motors’ Special Electric Motors are used within a wide variety of applications: Fans (airhandling units). Hydraulic power packs. Pumps (for water, fuels, oils). Shredders (granulation, crushing). Gears (gear reducers, gearmotors). Hazardous environments. Oil & Gas Industry. ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
IE Class: N/A. Output: 160kW – 2MW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 315–630. Protection: IP23| IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 | IC01. Insulation class: F. Duty type: S. Standards: N/A. Voltage: 3,0 kV|3,3 kV|6,0 kV|6,6 kV|10 kV|11 ...
Manufactured by:KELVION INC. / PHE based inYork, PENNSYLVANIA (USA)
Our range of transformers oil water coolers can be supplied in different mounting variants. The standard water cooler version is designed for direct mounting to the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. The coolers in general are used for specific types of transformers, such as furnace transformers ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
Output: 0,75kW – 355kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 80–160. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 | IC416 (option). Insulation class: F. Duty type: S1 | S2 | S3. Standards: IEC 60034-1-30. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
IE Class: IE1. Output: 0,75kW – 355kW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 56–200. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-2-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
IE Class: IE3. Output: 160kW – 2MW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 315–560. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-1-30. Voltage: 400V Y | 690V Y. Other voltages can be supplied on ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
IE Class: IE4. Output: 2,2kW – 230kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 100–315. Aluminium framesize: 100–160. Protection: IP55 | IP56 | IP65. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S1. Standards: IEC 60034-30-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V Δ – Motors ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
IE Class: IE2. Output: 0,75kW – 355kW. Poles: 2|4|6 pole. Speeds: 1000–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 80–160. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-2-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
Manufactured by:Omec Motors based inArnhem, NETHERLANDS
IE Class: IE3 | IE2 | IE1. Output: 11kW – 710kW. Poles: 2|4|6 pole. Speeds: 1000–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 160–355. Protection: IP23. Temperature class: B. Cooling: IC01. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-1-30. Voltage: 400V Δ. Other voltages can be supplied on ...
Manufactured by:Green Energy Development Co. based inTehran, IRAN
This product is an innovative micro-turbine utilized for distributed generation of hydroelectricity from the water streams (canals/rivers). The turbine is registered in the WIPO-PCT ...
Manufactured by:Suneco Micro Hydro Power based inDONGYING, Shandong, CHINA
Francis turbine is a reaction turbine，is the most common water turbine in use today. Applicable water head 30m~700m. Specific speed:50~300rpm. The largest capacity of our single Francis turbine unit is 6000KW. Head range up to more than 300 m. Capacity up to about 20 000 kW. Excellent peak efficiency. High efficiency also at partial water flow down to about 50%. Complete range of specific ...
Manufactured by:Gilbert Gilkes & Gordon Ltd based inKendal, UNITED KINGDOM
The Francis turbine, developed by James B Francis in Lowell, Massachusetts in 1849 is the most common water turbine in use today. A wicket gate around the outside of the turbines rotating runner controls the rate of water flow through the turbine for different power production rates. Francis are the preferred turbine for hydro-power where the available water source has medium head and flow ...
Manufactured by:Guangzhou Electway Technology Co., Ltd. based inGuangzhou, CHINA
It is widely used in hydro power stations with the head of 6--30 meters. It is suitable for hydro power resource of low water head and high flow, there are two types: fixed blade. and adjustable blade type. The fixed blade type is suitable for hydropower station with small capacity, the range is between 70. to percent, the adjustable blade type is larger with ...
Manufactured by:Etaeval GmbH based inHorw, SWITZERLAND
Transient operation is inherent to the operation of hydroelectric power plants and water supply systems, since machines are started, stopped or work at time varying operating ...