Hydropower Water Equipment Available In Canada
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Design for low head and large water flow hydropower station.Under the same water head, its specific speed is higher compared with the Francis turbine. Application water head is about 3-80m. Axial-flow turbine runner for Feng Huang ...
-
Distributed by Tuba Turbine GmbHbased in GERMANY
Hydropower plants harness water's energy and use simple mechanics to convert that energy into electricity. Hydropower plants are actually based on simple concept water flowing through a dam turns a turbine, which turns a generator. Here are the basic components of a conventional hydropower plant. ...
-
Manufactured by HydroSpin Power Solutionbased in ISRAEL
Hydrospin’s Hydrocharger converts AC power to DC, charging its internal battery and transferring the electric hydropower produced from the water’s Kinetic energy – to water sensors and monitoring devices. It is universally compatible with many devices and can be installed ...
-
Manufactured by RenTech Global Solutionsbased in USA
This book "SMALL HYDROPOWER SYSTEMS” has been written according to the B.Sc., Renewable energy Management syllabus The subject matter had been discussed in 2 ch apters and sub units as under:chapter 1: introduction to Hydropower energy 2: Small Hydropower Systems. ...
-
Manufactured by Valley Fabrication Inc.based in USA
Totes and Bulk Machine with standard pickup header and air jump. Supply water on the pickup belt for reduced friction and cooling. Standard Mol pickup belt. Standard 3/4″ nose bar. Adjustable float pressure. Stainless steel construction except for power train. 102″ folded width for Totes Machine, Under 120″ for Totes/Bulk ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
Type: EXD(E) IIB ATEX. Output: 0,75kW – 355kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Framesize: 80–315. Protection: IP55. Temperature class: T4, T5. Cooling: IC411. Insulation class: F. Duty type: S1. Standards: IEC 60034-30-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V Δ – Motors ≥ 3 kW. Other voltages can be supplied on ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
Output: 0,75kW – 355kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 80–160. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 | IC416 (option). Insulation class: F. Duty type: S1 | S2 | S3. Standards: IEC 60034-1-30. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: N/A. Output: 160kW – 2MW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 315–630. Protection: IP23| IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 | IC01. Insulation class: F. Duty type: S. Standards: N/A. Voltage: 3,0 kV|3,3 kV|6,0 kV|6,6 kV|10 kV|11 ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
OMEC Motors’ Special Electric Motors are used within a wide variety of applications: Fans (airhandling units). Hydraulic power packs. Pumps (for water, fuels, oils). Shredders (granulation, crushing). Gears (gear reducers, gearmotors). Hazardous environments. Oil & Gas Industry. ...
-
Manufactured by KELVION INC. / PHEbased in USA
Our range of transformers oil water coolers can be supplied in different mounting variants. The standard water cooler version is designed for direct mounting to the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. The coolers in general are used for ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: IE4. Output: 2,2kW – 230kW. Poles: 2|4|6|8 pole. Speeds: 750–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 100–315. Aluminium framesize: 100–160. Protection: IP55 | IP56 | IP65. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S1. Standards: IEC 60034-30-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V Δ – Motors ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: IE2. Output: 0,75kW – 355kW. Poles: 2|4|6 pole. Speeds: 1000–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 80–160. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411 Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-2-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: IE3 | IE2 | IE1. Output: 11kW – 710kW. Poles: 2|4|6 pole. Speeds: 1000–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 160–355. Protection: IP23. Temperature class: B. Cooling: IC01. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-1-30. Voltage: 400V Δ. Other voltages can be supplied on ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: IE1. Output: 0,75kW – 355kW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 80–400. Aluminium framesize: 56–200. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-2-1. Voltage: 400V Y – Motors ≤ 3 kW, 400V ...
-
Manufactured by Omec Motorsbased in NETHERLANDS
IE Class: IE3. Output: 160kW – 2MW. Poles: 2|4|6|8|10|12 pole. Speeds: 500–3600 RPM. RPM Frequency: 50 Hz | 60 Hz. Cast Iron framesize: 315–560. Protection: IP55 | IP56 | IP65 | IP66. Temperature class: B. Cooling: IC411. Insulation class: F. Duty type: S. Standards: IEC 60034-30 | IEC 60034-1-30. Voltage: 400V Y | 690V Y. Other voltages can be supplied on ...
-
Manufactured by Guangzhou Electway Technology Co., Ltd.based in CHINA
It is widely used in hydro power stations with the head of 6--30 meters. It is suitable for hydro power resource of low water head and high flow, there are two types: fixed blade. and adjustable blade type. The fixed blade type is suitable for hydropower station with small capacity, the range is between 70. to percent, the adjustable blade ...
-
Manufactured by Bio Global Group Incbased in USA
The growing demand for energy, as a result of our rapidly growing cities, Climate changing and dwindling fossil resources, are the reasons why In Bio Global Group, all our team is committed not only to the creation and construction of Green technology new buildings, but with the restructuration and remodilng of existing buildings introducing this Green technology, so they have a minimal impact on ...
-
Manufactured by Etaeval GmbHbased in SWITZERLAND
Transient operation is inherent to the operation of hydroelectric power plants and water supply systems, since machines are started, stopped or work at time varying operating ...
-
Manufactured by NuSTREEM LLCbased in USA
communities, retrofits of existing hydro sites, irrigation districts, municipalities & wastewater in pipe applications, and non-powered dams. The NuTURBINE based is on technological evolutions that significantly improve the performance of a long-accepted hydropower turbine paradigm. Those changes eliminate the need for a dam, offer a ...
-
based in ICELAND
The first hydropower plant in Iceland started operation in 1904 in Hafnafjörður. Reykjavík saw its first hydropower plant set up in 1921 and Akureyri in 1922. With these plants, the electricity market in Iceland was created. In 1965, Iceland established the national power company Landsvirkjun to “optimize the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you