Incineration Chamber Equipment
-
Manufactured by Raschka Engineering Ltdbased in SWITZERLAND
Static incineration chamber mainly used for liquid and off gas ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
For dense wastes such as wood or whole large animal carcasses, pre-treatment of the waste by crushing may be considered. Pre-treatment of this type of waste has several advantages. Large quantities of waste may be processed through the crusher and stored within a hopper irrespective of the incinerators ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The secondary chamber is where waste in the gaseous phase is treated. Combustion gases from the primary chamber are transferred into the secondary chamber for thermal treatment. Where necessary, the design and volume of the hamber will be established by the development of a computer Fluid Dynamic Model using Phoenics 2008 combustion and ...
-
Manufactured by Raschka Engineering Ltdbased in SWITZERLAND
A Rotary kiln is a pyroprocessing device used to raise materials to a high temperature in a continuous process, Raschka Engineering has applied such technology for solid waste incineration in combination with static (second) incineration ...
-
Manufactured by Ing.Gallaratibased in ITALY
These are pyrolitic static incinerators (furnaces), with static incineration chamber and separated post combustion chamber (P.B.), which can be mounted either vertically (PSV type, mounted on the furnace itself) or horizontally (PSO - mounted in line with the furnace). ...
-
Manufactured by Kapa Engineering Srlbased in ITALY
In red you can see the specifications as defined by the Legislation and in black the standards followed by HEFAISTUS incinerator system. "Waste should be driven with automatic loading in the incinerator chamber" hefaistus incinerators are equipped by full automatic loading system. "The loading door can not be opened before ...
-
Manufactured by GEI Works, LLCbased in USA
GEI Thermal Oxidizer Model A 1.5 is a solid waste thermal oxidizer. Built as a modular, multiple chambered incinerator, this product is engineered for all mixed composition, solid waste ...
-
Manufactured by Thermal Lining servicesbased in INDIA
Design of this waste incinerators is typical. Solid waste has built in carbon which supports self combustion if it is loaded in the chamber where temp of 750 c is maintained. Hence we maintain the loading chamber temp to 750 C through Automatic Gas Burner, at this temp waste release its in built Heat and raise temp of chamber to ...
-
Manufactured by Alfa-Therm Limitedbased in INDIA
Portable/Skid mounted Incinerator with dual chamber, dual burners. Double chamber unit. Completely self-contained unit. No pre-use construction at site. Ready to operate. Esthetically pleasing looks. Electrical requirement: 220 v AC. Height of stack - 3 mtrs. Burners- Diesel fired/Gas fired. Control Panel- Provided. Audio-visual ...
-
Manufactured by Radhika Engineersbased in INDIA
Small Animal waste incinerators to be used to incinerate dead animals like Dog, Goat, Pigs, Hen, Cat, Duck etc. It is commonly used in animal hospitals, clinics, animal shelters, animal control area etc. It is widely used to destroy to animal infection diseases, viruses and animal waste material. Dead animal incinerator with dual ...
-
based in INDIA
The design concept of this incinerator enables the use of only one burner in place of two, thereby enabling high cost savings. The incinerator contains two chambers housed in the same shell. Waste that is loaded in the primary chamber is burnt and the products of combustion flow across the hearth, into a secondary after-burn ...
-
Manufactured by Advanced Combustion Engineeringbased in AUSTRALIA
Advanced Combustion Engineering 'Controlled Air Incinerators' are primarily designed for batch operation with a burning cycle of approximately two hours and a cooling cycle also of approx, two hours, depending upon the density and calorific value of the waste. Unlike conventional multiple chamber incinerators which have large quantities of ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 13500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Radhika Engineersbased in INDIA
control system. Our incinerator utilizes the two chamber approaches that insures full combustion of waste in control parameters. Incinerator is available with Air Pollution Controlling Devices which enable us to remove all toxics gases from the emission and meet the air emission ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 13500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 13500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
-
Manufactured by Nanjing Clover Medical Technology Co., Ltd.based in CHINA
Solid Chamber temperature 8000C -10000C. Gas Chamber temperature 10000C -12000C. Chamber Anti-Rate 14500C. Residency time 2.0 Sec. Burning efficiency >98%. Waste Lower Calorific Power ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you