Refine by
Kaplan Turbine Equipment & Supplies
65 equipment items found
Manufactured by:Hydro Power Plant SAS (HPP) based inVANDOEUVRE LES NANCY, FRANCE
Designed for Heads from 1.5 m to 45 m and from 3 to 6 blades, HPP Kaplan runners can achieve more than 95% of ...
Manufactured by:HydroTech Engineering, LLC based inSandy, UTAH (USA)
With over 50 years in the industry, HTE Engineering and its partners have provided Kaplan turbines ranging in size from 200 kW to 400 ...
Manufactured by:MJ2 Technologie sas based inCavalerie, FRANCE
Noting that on a number of applications the VLH turbines were not necessarily the best solution for the site, we decided to develop a range of Kaplan conventional turbines, with vertical double or single adjustment as well as horizontal or inclined axial turbines, which we exclusively propose equipped with PMGA direct drive ...
Manufactured by:Suneco Micro Hydro Power based inDONGYING, Shandong, CHINA
Kaplan (Propeller type) Hydro Power Turbine Generator Plants. Suitable for low Head (2 to 50 m) and high Flow rate (1 m3/s to 60 ...
Manufactured by:Hydroalp S.r.l. based inCimego, ITALY
Hydroalp provides Kaplan turbines for low head plants, from a few meters to tens of meters, with discharge from a few cubic meters up to a few tens of cubic meters per second. Kaplan turbines are the best technical solution for all those sites where low head and high flow coexist. Kaplan turbines ...
Manufactured by:Hydrohrom, s.r.o. based inBystrice, CZECH REPUBLIC
Runner and guide wheel regulation. Used primarily at heads from 3,5m. Offers better machine efficiency which is achieved by relative motion of vanes and blades. Guide wheel performs the function of both operational and closure system whichis controlled by gravity or hydraulic pressure accumulator. Installation is almost exclusively with a direct connection to the ...
Manufactured by:Wasserkraft Volk AG based inGutach, GERMANY
The solution for high energy production with heavily varying flow rates at low heads. Designed for water heads between 2,5 and approx. 30 m and large water flows. Achieving high efficiencies, even at partial loads with single- or double-regulated systems. WKV offers power outputs of up to 10 MW per unit, others on ...
Manufactured by:Strojírny Brno, a.s. based inKurim, CZECH REPUBLIC
Kaplan turbine is applied for Low Heads and High Discharge. We design our Kaplan turbines with adjustable Guide Vanes and Runner Blades during operation ensuring optimisation of efficiency at varying head and ...
Manufactured by:Mavel a.s. based inBenesov, CZECH REPUBLIC
Runner Diameters 710 mm to 3000 mm. Number of Runner Blades 4, 5 or 6. Head Range 2 to 35 meters (6.5 to 115 feet). Flow Range 2 to 60 cms (70 to 2120 cfs). Power Output 30 kW to 20 MW. Transmission Direct ...
Manufactured by:Ganz Engineering and Energetics-machinery Manufacturer Ltd based inBudapest, HUNGARY
Adjustable guide vane ring for changing the water amount. The stainless steel guide vanes are powered by carbon steel levers with safety sliding clutches. The guide vanes rotate in maintenance-free pins, which are in the turbine covers with stainless steel protection. If necessary, they are equipped with a guide vane adjusting system, this ensures good efficiency in a wide operating ...
Manufactured by:Litostroj Power based inLjubljana, SLOVENIA
Design principle and range of use: Kaplan turbine is a double-regulated turbine. It is equipped with a Kaplan runner with variable-pitch blades that is hydraulically optimized for a wide range of discharge and a relatively wide range of head and is combined with regulated guide vanes, which makes a Kaplan ...
Manufactured by:Hidropower d.o.o. based inSpodnja Idrija, SLOVENIA
The Kaplan turbine with its adjustable guide vanes and runner blade allows for the optimal of varying water flow for lower heads and larger ...
Manufactured by:Hydrohrom, s.r.o. based inBystrice, CZECH REPUBLIC
Runner and guide wheel regulation. Designed as a monoblock and is used primarily in reconstruction of older plants. The guide wheel performs the function of both the operational and closure system solved by pressure accumulator. Installation is only with direct connection to the generator. Turbines are controlled by the PLC control system and the mechanical part is controlled by ...
Manufactured by:Mavel a.s. based inBenesov, CZECH REPUBLIC
Runner Diameters 850 mm to 5500 mm. Number of Runner Blades 4, 5 or 6. Head Range 1.5 to 35 meters (5 to 115 feet). Flow Range 3.5 to 200 cms (124 to 7060 cfs). Power Output 70 kW to 20 MW. Transmission Direct Drive, Belt Drive or Parallel ...
Manufactured by:Mavel a.s. based inBenesov, CZECH REPUBLIC
Runner Diameters 1050 mm to 5500 mm. Number of Runner Blades 3 or 4. Head Range 1.5 to 12 meters (5 to 39.5 feet). Flow Range 15 to 150 cms (530 to 5340 cfs). Power Output 400 kW to 8 MW. Transmission Belt Drive or Parallel ...
Manufactured by:Hydrohrom, s.r.o. based inBystrice, CZECH REPUBLIC
Runner and guide wheel regulation. Designed as a monoblock, and is used primarily in reconstructions of older plants. Guide wheel performs the function of both the operational and closure system which is controlled by gravity or hydraulic pressure accumulator. Installation is either with transfer belt or with a direct connection to the ...
Manufactured by:Mavel a.s. based inBenesov, CZECH REPUBLIC
Runner Diameters 1050 mm to 2500 mm. Number of Runner Blades 3 or 4. Head Range 1.5 to 12 meters (5 to 39.5 feet). Flow Range 5 to 45 cms (180 to 1590 cfs). Power Output 100 kW to 3 MW. Transmission Direct Drive, Belt Drive or Bevel ...
Manufactured by:Hydrohrom, s.r.o. based inBystrice, CZECH REPUBLIC
Regulation of the runner with runner blades fixed. Is the most frequently used machine for newly constructed small head hydropower plants. It is also used in the renovation of older plants originally equipped with vertical Francis turbines, which often achieves a better flow usage. The advantage is the low cost of the equipment. Installation is ether with a drive belt or directly connected to the ...
Manufactured by:Hydrohrom, s.r.o. based inBystrice, CZECH REPUBLIC
Control of the impeller and diffuser. Constructed as a monoblock and can be used in both vertical and horizontal versions. The guide wheel performs the function of operational closure and the system is contrlled by gravity or hydrualic pressure accumulator. Installation is almost exclusively a direct connection to the ...
Manufactured by:Canadian Hydro Components Ltd. (CHC) based inAlmonte, ONTARIO (CANADA)
Maximum output and control in higher head conditions. Specifically suited to high head hydro sites, CHC manufactures a range of conventional Kaplan turbines ranging in size from 500 mm to 3200 mm. Conventional Kaplan turbines feature adjustable turbine blades and wicket gates and are designed to optimize ...