Showing results for: Kaplan Hydro Turbine Equipment
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Kaplan water turbine is axial overpressure water turbine, which has a radial inflow, outflow, however axial. It is used for high flow rates and low lows. For a wide range of flow rate is achieved a very good yields, even more than 92%. More than 20 years of experience means the accumulation of experience and knowledge that ...
-
Manufactured by HydroTech Engineering, LLCbased in USA
The bulb turbine is a variation of the propeller-type turbine (similar to the Kaplan turbine). In the bulb turbine arrangement, the generator is encapsulated and sealed within a streamlined watertight steel housing mounted in the center of the water passageway. The generator is driven by a variable-pitch ...
-
Manufactured by Strojírny Brno, a.s.based in CZECH REPUBLIC
Kaplan turbine is applied for Low Heads and High Discharge. We design our Kaplan turbines with adjustable Guide Vanes and Runner Blades during operation ensuring optimisation of efficiency at varying head and ...
-
Manufactured by CKD Blansko Holding, a.s.based in CZECH REPUBLIC
Since 1904 CKD Blansko has manufactured more than 427 Kaplan turbines and they operate at 111 sites. Their total output amounts more than 5346 MW. We provide horizontal or vertical, spiral or flume arrangement, bulb, pit or S-type with fixed or regulated blades and/or wicket gates. All types of Kaplan turbine used for operation ...
-
Manufactured by GUGLER Water Turbines GmbHbased in AUSTRIA
We supply Kaplan-Turbines up to 20 MW per unit. The best solution for low pressures with high flow. Individualised design at state-of-the-art technology provides highest efficiency, longest lifespan and secures extraordinary ...
-
Manufactured by Kössler - Voith Hydrobased in AUSTRIA
Kaplan turbines are primarily used in the low head range with large volumes of water. The adjustability of the guide vanes and runner blades allows optimal use of varying water ...
-
Manufactured by WWS Wasserkraft GmbHbased in AUSTRIA
This type of turbine is primarily suitable for low pressure areas and large quantities of water. The head of water (1m to 40m) determines the number of blades on the rotor (3 to 6 blades). WWS supplies Kaplan turbines with vertical design with concrete or steel spirals as well as tube turbines – individual according to the ...
-
Manufactured by Zeco Di Zerbaro & Costa & C. S.r.lbased in ITALY
Represents the evolution of Kaplan turbine, developed to reduce civil works and the enviromental effects in HPP. Power from 80 kW up to 2 MW Horizontal or vertical ...
-
Manufactured by Zeco Di Zerbaro & Costa & C. S.r.lbased in ITALY
Classic solution for the exploitation of high water volumes and low heads, Kaplan Turbines benefit of high efficiency even with wide flow rate range, thanks to the runner and wicket gate regulation system. Zeco supplies Kaplan turbines both in vertical or horizontal solution, directly connected to the generator shaft or through ...
-
Manufactured by Canadian Hydro Components Ltd. (CHC)based in CANADA
Maximum output and control in higher head conditions. Specifically suited to high head hydro sites, CHC manufactures a range of conventional Kaplan turbines ranging in size from 500 mm to 3200 mm. Conventional Kaplan turbines feature adjustable turbine blades and wicket gates and are designed to ...
-
Manufactured by VAPTECH Ltdbased in BULGARIA
The axial turbines are designed for projects with low and very low heads with a strong flow variation. VAPTECH offers mainly the classic vertical shaft Kaplan turbine with 3 to 6 runner blades and with double regulation. For runner diameters up to 1400 mm we use a steel spiral casing and for bigger runner diameters we recommend a concrete ...
-
Manufactured by Hydro Energy Michal Twardziszewskibased in POLAND
Kaplan Turbines from 10 kW to 500 kW. Rotor diameter range – from D=300 to D=1100 mm. We produce Kaplan turbine with an efficiency of 92 %. With the right technological processes, sophisticated solutions and close collaboration with cooperators have possibilities to shorten the time to produce turbines and ...
-
Manufactured by Hydro Energy Michal Twardziszewskibased in POLAND
Propeller turbines – from 10 kW to 500 kW. We produce propeller turbines with a rotor diameter – from fi 300 mm to 1100 ...
-
Manufactured by Tschurtschenthaler Turbinenbaubased in ITALY
1913 the Austrian engineer Viktor Kaplan developed the Kaplan turbine, according to the basics of the Francis turbine. This turbine is excellent for small fall heights (from 1 to 15 metres) and for big water flow rates. A typical application example are the river hydraulic power ...
-
Manufactured by OSSBERGER GmbH Co. KGbased in GERMANY
When it comes to very small heads, other technical approaches can be advantageous in order to meet the needs of the customer. That is why OSSBERGER plans systems with Kaplan turbines here. The decision on the suitable type of power plant is made following an intensive examination of the customer's requirements and the planned ...
-
Manufactured by Alstombased in FRANCE
Alstom's Kaplan turbines in operation cover low head applications ranging from about 15 to 50 meters, and outputs up to 130 MW.Compared to Bulbs, their vertical configuration allows larger runner diameters (above 10 m) permitting to increase the unit power and thus minimising the number of units.Kaplan turbines have the same challenge as ...
-
Manufactured by Suneco Micro Hydro Powerbased in CHINA
Kaplan (Propeller type) Hydro Power Turbine Generator Plants. Suitable for low Head (2 to 50 m) and high Flow rate (1 m3/s to 60 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you