Lean Gas Equipment
-
Manufactured by Kraft Energy Systems LLCbased in USA
Lean and clean, the KN-L Series delivers the benefits of higher efficiency lean-burn engine technology and still produces low exhaust emissions without after-treatment. Our broadest range of Natural Gas CHP Modules, the KN-L Series includes 7 models, each configurable for indoor or outdoor installation. Compact and pre-engineered to ...
-
Manufactured by Blackwood Technologybased in NETHERLANDS
Blackwood Technology’sFlashTor ®technology is a unique process to produce torrefied biomass.FlashTor ®is a proprietary multi-stage process using a series of reactors to convert fibrous biomass feedstock into torrefied biomass. The volatiles released during the torrefaction process (torgas) are burnt in a lean gas combustor, ...
-
Manufactured by C-deg environmental engineering GmbHbased in GERMANY
Lean gases are gases that mainly consist of the inert components nitrogen and carbon dioxide and contain such a low concentration of oxidizable components as to preclude their use for energy utilization. Industrial exhaust air is a special kind of lean gas. Industrial exhaust air stands for air with traces of hydrocarbons below the lower ...
-
Manufactured by Leverage Incorporated NVbased in BELGIUM
Burners using lean gas or residual gas generally comprise a number of coaxial ducts or pipes arranged to supply a ring or rings of fuels centred on the axis of the burner and feeding liquids to the burner nose. These fuels are generally distributed in or around the circumference of a combustion air stream. The purpose of these ...
-
Manufactured by Issendorff TPT e.K.based in GERMANY
range in which metal fiber burners are used extends from a few kilowatts to several megawatts. Metal fiber burners can be operated with natural gas, LNG, biogas, methane, ethane, propane, butane, lean gas or also with hydrogen/methane ...
-
Manufactured by Uniflare Ltd.based in UNITED KINGDOM
The UF10 Lean gas range of flares are specifically designed for the closed and declining in gas landfill sites. Uniflare’s unique burner design has 100% proven track record with emissions standards set out by the Environment Agency and their guidance on flaring LFGTN-05 these units offer a cost effective solution to controlling the ...
-
Manufactured by Aurelia Turbines Oybased in FINLAND
Natural gas is a well-known fuel. Biogas can be regarded as “a renewable, but lean natural gas” – but where does it come from, what kind of role it can play in power generation? And what does it mean, when it is being said that “biogas does not have a ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
engine catalytic combustors replace existing lean premix gas turbine mixers and injectors in the combustor with integrated RCL® catalytic injectors, converting all combustion in the engine to catalytic ...
-
Manufactured by Koch Heat Transfer Companybased in USA
Koch Heat Transfer hairpins are the industry standard for efficient performance and proven reliability. Backed by more than 300 years of combined engineering and manufacturing experience, our innovative designs and unique closures are a key element of more economical designs that offer ongoing operational savings. Learn more about putting the industry-leading expertise of Koch Heat Transfer and ...
-
Manufactured by Wartsila Corporationbased in FINLAND
Our gas power plants are designed for a wide variety of baseload, load following and peaking solutions. The plants are based on modular engine units that can use various gaseous fuels and run even in the most challenging ambient conditions. We have gas power plants in 62 countries with a total combined output of 9.7 GW. Our largest gas power ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
of the benefits of a full catalytic combustor at a fraction of the cost, and perhaps as important, in a package that is more readily retrofittable to existing engines. PCI is developing catalytic pilot burners to allow conventional state-of-the-art natural gas-fired Dry Low NOx (DLN) gas turbine engines to achieve substantially lowered NOx emissions with ...
-
Manufactured by BDI-BioEnergy International GmbHbased in AUSTRIA
Since 2010, the innovative bioCRACK technology has been essentially driven forward by the cooperative alliance between the Austrian mineral oil company OMV and BDI. OMV supported the project with resources and subsequent processing of the materials, as well as evaluation of the liquid ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
This Burkhardt adaptation of the popular MAN D26 pilot injection gas engine of the CHP ECO 180 HG operates without pilot oil. Thus, it is operated on wood gas alone and is even easier to service. The pilot oil unit was removed. Instead, the wood gas-air mixture is ignited with spark plugs. The Burkhardt ECO 165 HG, together with the Burkhardt ...
-
Manufactured by Isotex Corporation Pvt. Ltdbased in INDIA
Capacity – up to 15 TPH. Pressure – up to 26 kg/cm2. Fuels – Natural Gas / LPG / Spent gas / Diesel / FO / LSHS ...
-
based in USA
The CONVERGE Academic Program empowers students, professors, and academic researchers globally to contribute to the advancement of science and technology. We offer exclusive license deals (free in the United States and Europe) for our industry-leading computational fluid dynamics software, CONVERGE, for academic research. In addition, we provide free support, training, and resources for our ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
This burner represents the latest development of our standard burners and was specially designed for use on rotary kilns and post-combustion ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Originally, the SWP burner was developed in order to be able to offer an optimised body design for pressure applications. The simple shape of the burner case, composed of mainly cylindrical and conical shapes, allows the construction of a cost-effective and material-optimised burner for pressure ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
The concept of the CS - SWB burner has been proven hundreds of times and the burner has been developed and optimised over ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
The V 3.90 Burkhardt wood gasifier, together with the ECO 180 HG (with pilot injection gas motor) combined heat and power plant or the ECO 165 HG (petrol engine), delivers electrical and thermal energy from wood pellets. Depending on which CHP we use, we are able to generate 260 - 270 kW heat and 165 - 180 kW of ...
-
Manufactured by CS Combustion Solutions GmbHbased in AUSTRIA
Designed specifically for operation with preheated combustion air, this burner series can have combustion air temperatures above 350°C up to 600°C. The air box of this burner is lined with fireproof concrete to prevent overheating - and above all to prevent unacceptable expansion - of the burner ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you