Only show results in Virginia? Ok

Medium Wind equipment

  • Medium Wind Turbines

    You can rely on our experience to give you the very best support and service every step of the way from your initial enquiry through to planning assistance, installation, commissioning and management of your new wind turbine. - See more at: http://www.dulas.org.uk/wind-info.cfm#medium_wind_turbines

    By Dulas Ltd based in Machynlleth, Powys,, UNITED KINGDOM. from Wind Product line

  • Model V136-4.2 MW - Medium Wind Turbines

    The V136-4.2 MW is designed for medium wind sites. It boosts performance by 11 percent compared to V136-3.45 MW and reaches a class leading 103.9 dB(A) max sound power level, enabling permitting and realisation of wind projects in sound critical areas.

    By Vestas Wind Systems A/S based in Aarhus N, DENMARK.

  • Turbowinds - Model T400-34 - Medium-Wind Turbines

    By choosing the Turbowinds T400-34 you are basing your investment on more than 25 years experience in wind energy generation. The T400-34 has been designed specifically for locations where larger turbines simply will not fit, due to planning or site accessibility, and where the producer wants a high annual energy yield. It fits in the same ...

    By Turbowind Energy based in Co. Kildare, IRELAND.

  • BE-Wind - Model EOW-300 - Small Wind Turbines System

    Medium-high power outputs 2, 3,4 kW is available 220 Voltage and 112 Voltage Output. This design has 2 x 96' helix blades peride. designed to capture 360 degrees of lir flow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s). Only 575 lbs (depending on generators, built from 6061 Aluminum that Is processed the same as commercial ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • BE-Wind - Model EOW-200 - Small Wind Turbines System

    The 200 has been our pilot system for more than 10 years. Designed for MEDIUM power Applications 1.2. 3 kW is available. This design has optional 2 x 60' or 3 x 60' helix blades per side, designed to capture 360 degrees of airflow, with a low wind speed kick in of only 3-4 mph. (1.5-2.0 m/s).  Only 450 lbs (depending on generators, built from ...

    By BE-Wind based in Winter Garden, FLORIDA (USA).

  • Model E3120 - Endurance Turbine

    Dulas installed the very first Endurance turbine in the UK in 2010 and have completed several installations during 2011 and 2012. The Endurance E3120 is a high performing medium scale wind turbine. Its proportionately larger rotor diameter and swept area are specifically well suited to UK wind conditions and wind speeds. The power generation from ...

    By Dulas Ltd based in Machynlleth, Powys,, UNITED KINGDOM. from Wind Product line

  • FusionDrive - Medium-Speed Permanent Magnet Generators

    The most compact medium-speed solution available on the market today, FusionDrive®, utilizes the same frame for both the generator and gearbox. FusionDrive® is the result of bringing together the world-class wind power technology of Moventas, one of the industry’s leading wind gear manufacturers, and The Switch. The generator active ...

    By The Switch a Yaskawa company based in Helsinki, FINLAND. from Wind - Permanent Magnet Generators Product line

  • Model PMG 1650 – 6400 KW, 136 – 414 RPM - Medium-Speed Permanent Magnet Generators

    The Switch medium-speed PMGs operate with a single- or two-stage gearbox at a generator speed of typically between 100 rpm and 500 rpm. Combining the advantages of low- and high-speed technology, these PMGs offer extremely high availability and reliability, resulting in increased annual energy production (AEP).

    By The Switch a Yaskawa company based in Helsinki, FINLAND. from Wind - Permanent Magnet Generators Product line

  • Model Exceed Series 3+ - Gears Box

    Highest torque carrying capacity product platform for high and medium speed drivetrains in 3 MW and up.

    By Moventas Oy based in Jyväskylä, FINLAND. from Onshore Wind Product line

  • BENZ - Model PMG DD 100kW - Direct Drive – Permanent Magnet Wind Turbine

    This amazing Direct Drive, Permanent Magnet Wind Turbine is specially designed for low and medium wind speeds and applies the latest design in wind turbine technology. The direct drive, permanent magnet design guarantees reliable performance, efficiency, convenient transport easy installation and most importantly, very low maintenance.

    By MyWindPowerSystem Ltd based in Temple Quay, UNITED KINGDOM. from Wind Turbine Product line

  • Northwind - Model 100 - Wind Turbine

    The Northwind 100 wind turbine gives economical, reliable power to grid connected systems all over the world.  Rated at 100 kW the Northwind 100 utilises the best technology available today, incorporating a permanent magnet generator and gearless design, maximizing the return on investment on small to medium sized wind energy projects.

    By Altergen Ltd. based in Shrewsbury, UNITED KINGDOM. from Wind Turbine Product line

  • Senvion - Model 2.XM Series - Wind Turbine

    The 2.XM series offers a choice of 4 models designed to reliably generate high yields at low to medium wind speed sites. With rated output ranging from 2.3 to 2.4 MW, hub heights from 90 to 120 m and rotor diameters from 109 to 124 m, the series provides the versatility to meet a wide range of specific site requirements, regulatory demands and ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 2.5/103 - Wind Turbine

    With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

  • Gamesa - Wind Turbines

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • Gamesa - Model G80 - Multi-megawatt Wind Turbine

    The track record built up coupled with deep knowledge of current market demands has enabled Gamesa to continue to add the finest technology developments to its 2.0-2.5 MW platform, bringing significant innovation in terms of design, product and performance. The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar ...

    By Siemens Gamesa Renewable Energy based in Madrid, SPAIN. from Wind Turbines Product line

  • GE - Model 2.2-2.4 MW - Platform Wind Turbine

    GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Wind Turbine Product line

  • EWT - Model DW52/54-500kW - Wind Turbine

    EWT’s DIRECTWIND 500kW is designed to maximise yield from low-medium wind sites. The DW52/54-500kW is a pitch controlled variable speed wind turbine that combines continuous market driven innovation with highly advanced direct drive technology. The 500kW turbine is being offered with a 52m and 54m rotor diameter in order to ...

    By EWT Holdings N.V. / EWT B.V. based in AL Amersfoort, NETHERLANDS. from Wind Turbine Product line

  • Nordex - Model N117/3000 (3.0 megawatts) - Wind Turbine

    The N117/3000 is designed for medium wind speeds (IEC-2) and has a 20 percent greater nominal output compared with its predecessor. Yet, despite this substantial increase in output, sound power levels have remained stable.

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • Nordex - Model N100 (2.5 Megawatt) - Wind Turbine

    The Nordex N100/2500 kW is a 2.5 MW wind turbine specially configured for moderate and low wind conditions. The N100/2500 is one of the largest turbines in the Nordex product line and its yield rates among the highest in its power class. With a rotor sweep of 7,854 square metres, this IEC-2 certified turbine operates particularly profitably in ...

    By Nordex SE based in Hamburg, GERMANY. from Wind Turbines Product line

  • aeroMaster - Model aM 1.5/83 - Wind Turbine

    With its 83 m rotor diameter and design for TC2A wind conditions, aeroMaster 1.5/83 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

    By aerodyn Energiesysteme GmbH based in Rendsburg, GERMANY. from Wind Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you