Module Solar Simulator Equipment
-
Manufactured by Supo(Xiamen)Intelligent Equipment Co.,Ltdbased in CHINA
Application:Mainly used in automatic test and result record of solar, mono-crystalline silicon, poly-crystalline silicon solar cell, module and thin-film module. Products Features: 1. Flash impulse continuous adjustable range 0-60ms, 2. Four-line measurement; 14-bit 4-channel high-speed synchronous acquisition card, 8000 data ...
-
Manufactured by Supo(Xiamen)Intelligent Equipment Co.,Ltdbased in CHINA
Application:Mainly used in automatic test and result record of solar, mono-crystalline silicon, poly-crystalline silicon solar cell, module and thin-film module. Products Features: 1. Flash impulse continuous adjustable range 0-60ms; 2. Four-line measurement; 14-bit 4-channel high-speed synchronous acquisition card, 8000 data ...
-
Manufactured by Endeas Oybased in FINLAND
QuickSun 800-series Module Solar Simulators use Xenon flash tubes for simulating solar irradiation. Complete IV-characteristics are recorded during one flash at desired intensity level when module is swept electronically from short circuit to open ...
-
Manufactured by Endeas Oybased in FINLAND
Accurate flash testing of high-efficiency solar cells and modules with QuickSun solar simulators using Capacitance Compensation (CAC). High-efficiency solar cells – such as passivated emitter and rear contact (PERC) cells, heterojunction technology (HJT) cells, and interdigitated back-contact (IBC) cells ...
-
Manufactured by PSE AGbased in GERMANY
In certification laboratories for photovoltaic modules, steady-state solar simulators are mostly used for stabilization / light soaking tests (MQT 19) and hot-spot endurance tests (MQT 09) according to IEC 61215 and IEC 61730. An initial stabilization is required for all PV modules that undergo a standard test procedure. For the ...
-
Manufactured by Eternalsun Spirebased in NETHERLANDS
Fast and high-resolution non-uniformity measurements of steady-state solar simulators. Light uniformity of a steady state solar simulator should be measured and calibrated regularly to maintain low non-uniformity values. The Uniformity Calibration Robot (UCR) improves the process of measuring the non-uniformity of a steady state ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you