Nuclear Power Equipment In Asia & Middle East
-
Manufactured by Dongfang Electric Corporation (DEC)based in CHINA
Nuclear is a zero-emission clean energy source. As an early starter in nuclear power industry, DEC is capable of mass-producing Nuclear Island main equipment and Conventional Island TG Packages with full coverage of technologies including 2 Generation+, introduced 3Generation (EPR/AP1000] and independent 3 Generation ...
-
Manufactured by Eugen Seitz GmbHbased in SWITZERLAND
Our company is a lead provider of class 1E Solenoid Operated Valves (SOVs) for nuclear power plants all over the world. Our products meet the highest quality and safety standards and have 40 years of successful operation in NPPs with no ...
-
Manufactured by Clariant International Ltd.based in GERMANY
Iodine Absorption in Nuclear Power Plants - For the removal of radioactive iodine in nuclear power plants and reprocessing plants there is a series of adsorber systems available, proven over decades. These are based on silver or potassium iodide, supported by acid resistant carriers. Products include: AC 6120 and ...
-
Manufactured by General Mechanical Works Pvt. Ltd.based in INDIA
GMW are fully equipped for design, fabrication and erection of Fixed or Floating roof storage tanks for oil and water services and have installed tanks for following applications: LSHS / HFO / NAPTHA, D.M. Water / CST, Potable/Service/Raw, LDO, Lube Oil. We have capacity for bending / Rolling of plates upto 50 mm thick for Tank Work. We are approved vendor for PSU’s like BHEL, NTPC, EIL, ...
-
Manufactured by CECO Environmentalbased in USA
In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or ...
-
Manufactured by CECO Environmentalbased in USA
A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final ...
-
Manufactured by CECO Environmentalbased in USA
Nuclear Moisture Separator Reheater Vessels (MSR) are installed between the high pressure and the low pressure steam turbines at a nuclear power plant. This technology is utilized to remove water condensed from the process steam to maximize thermal efficiency of the low pressure turbine and minimizes erosion/corrosion of steam loop ...
-
Manufactured by Nichias Corporationbased in JAPAN
This metallic heat-insulating material is used for the reactor pressure vessel, recirculation equipment, and all apparatuses and pipes. It is made of thin stainless steel sheet to prevent corrosion, has high mechanical strength, and can be easily and quickly attached or detached, reducing exposure dose during ...
-
Manufactured by Auro Pumps Pvt Ltdbased in INDIA
Molten Salts have been used as medium of heat transfer since many years in the Chemical, Metal refining, Glass, Nuclear and Solar Energy sectors. Molten Salts are usually a eutectic mixture of sodium, potassium, lithium or chloride based salts. A eutectic mixture is a mixture of two or more components which usually do not interact to form a ...
-
Manufactured by ENERTORK Co., Ltdbased in SOUTH KOREA
LTMD-Q Series, which developed for nuclear power use, especially Class-1E are available to multi turn valves such as globe, gate and so on. Also available to quarter turn valves like ball and butterfly in combination with gearbox. Robust and simple construction made of iron cast guarantees long lifespan and easy maintenance. It was ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Nuclear power plants use nuclear technology to generate energy and are therefore particularly obliged to pay attention to safety. The smooth operation of a nuclear power plant requires know-how and professional expertise - from conception to regular maintenance. ARNOLD supports you in the planning and ...
-
Manufactured by KAY BOUVET ENGINEERING LTD.based in INDIA
The nuclear industry in India has been expanding rapidly during the last 20 years. Continuous support from the government, and the persistent drive to power the nation using clean, emission free nuclear power has allowed this industry to thrive in the last decades. In 1999, Kay Bouvet began its collaboration with the Department ...
-
Manufactured by Balcke-Durr GmbHbased in GERMANY
As a pioneer of MSR technology since the beginning of nuclear power generation, with an experience of more than 50 years, we provide Moisture Separator Reheaters (MSR) and equipment for moisture separation for new builds, retrofits and power upgrades in the field of nuclear and solar thermal power plants of ...
-
Manufactured by Jiangsu Digital Eagle Technology Development Co., Ltdbased in CHINA
Application: political core areas, chief residences, major security tasks guard point surrounding, nuclear power plants, oil refineries and such flammable areas, and etc. Detection parameters: 1.Detection frequency range: Radio signal link band based on civilian-level drone, range 300-6000MHz. 2. Can identify the majority of drone ...
-
Manufactured by G-TOPS Co., Ltd.based in SOUTH KOREA
1) Piping Spool • Carbon, Stainless, Super Duplex/Alloy, Titanium, Copper/Nickel, Clad, GRE/FRP, Inconnel, Nimonic • Projects for Thermal/Combine Cycle/Nuclear Power Plant, Chemical Plant, On/Offshore Plant • Capacity : Carbon(6000 Ton/Year), Stainless(3,000 Ton/Year), Super Delux/Alloy(4500 Ton/Year) 2) Small Radius Bend ...
-
Manufactured by Plus Power Battery Co., Ltd.(Plus Power Battery)based in CHINA
Main Applications: Communication equipment; Telecommunication control equipment; Emergency lighting systems; Electric power systems; Power station; Nuclear power station; Solar powered and wind powered systems; Load leveling and storage equipment; Marine equipment; Power ...
-
Manufactured by AVIC-Tech (Xiamen) Electronics Co., Ltd.based in CHINA
ANP Series 1E UPS for nuclear plants, as a piece of equipment relevant to nuclear safety, is applied to provide reliable energy for instrument control, monitor and other active devices installed to guarantee the safety of nuclear plants. Although without MCU and DSP, its hard core employs pure hardware control circuit to ensure that ...
-
Manufactured by Ashtapad Overseasbased in INDIA
Since 2004, Ashtapad Overseas has manufactured ASTM B366 WP 904L Stainless Steel Socket weld fittings, flange, elbow, tee, reduction, caps, forged fitting materials for oil and natural gas pipelines, refinery and petro chemistry facilities, nuclear power and electricity production plants, refinement and extrication plants, dams and ...
-
Manufactured by Yantai Dongde Industrial Co.,Ltdbased in CHINA
very low pressure to 220MPa, it is used in industrial gases, food industry, petrochemical, nuclear power, aviation, aviation Aerospace, military equipment, scientific research and testing and other ...
-
Manufactured by Energy & Machinery Korea Co., Ltdbased in SOUTH KOREA
Develop and produce high precision power plant parts; Focused on the major assembly and part machining technologies required for high precision and accuracy in nuclear and thermal power generation facilities. EMK produces both technically demanding and basic power plant facility parts. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you