Nuclear Power Equipment In USA
-
by NATS, Inc.based in USA
Nuclear power is electricity generated by power plants that derive their heat from fission in nuclear reactors. Its share is rapidly growing in emerging economies with high energy growth demands. 2,586a: TERAWATT HOURS OF ELECTRICITY IN 2019. 10: EQUIVALENT TO THE GLOBAL ELECTRICITY GENERATION. 2nd: LARGEST LOW-CARBON ...
-
by AREVAbased in USA
As well as being integral to AREVA's operations, nuclear reactors are also central to the Nuclear Measurement business unit. The business unit offers solutions to meet all power plant ...
-
Manufactured by Clariant International Ltd.based in GERMANY
Iodine Absorption in Nuclear Power Plants - For the removal of radioactive iodine in nuclear power plants and reprocessing plants there is a series of adsorber systems available, proven over decades. These are based on silver or potassium iodide, supported by acid resistant carriers. Products include: AC 6120 and ...
-
Manufactured by GE Power & Waterbased in USA
The GE nuclear power conversion solutions for large and very large reactors are based on our Arabelle steam turbine technology platform. Arabelle steam turbines deliver power from 700MW to 1,900MW in both 50 and 60 Hz cycles and can be adapted to any heat sink conditions with a choice of low pressure modules and types of last-stage blades. ...
-
Manufactured by Teledyne Brown Engineeringbased in USA
TBE provides design, development, testing, and operation of systems and hardware that support nuclear power ...
-
Manufactured by CECO Environmentalbased in USA
In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or ...
-
Manufactured by CECO Environmentalbased in USA
A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final ...
-
Manufactured by CECO Environmentalbased in USA
Nuclear Moisture Separator Reheater Vessels (MSR) are installed between the high pressure and the low pressure steam turbines at a nuclear power plant. This technology is utilized to remove water condensed from the process steam to maximize thermal efficiency of the low pressure turbine and minimizes erosion/corrosion of steam loop ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Nuclear power plants use nuclear technology to generate energy and are therefore particularly obliged to pay attention to safety. The smooth operation of a nuclear power plant requires know-how and professional expertise - from conception to regular maintenance. ARNOLD supports you in the planning and ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
temperatures in turbines. Further areas of application for semi-finished products of Ni-based superalloys are chemical plants with extreme requirements for corrosion resistance as well as nuclear power ...
-
Manufactured by Advance Thermal Corp.based in USA
Advance Thermal Corp. has been working with the Nuclear Power industry for over 30 years. In fact, we service the largest Nuclear Power producers in the USA and Canada. Our two plants strategically located around the country allow Advance Thermal Corp. to participate in multiple Nuclear Plant refueling outages ...
-
Manufactured by CIPP Corporation, Inc.based in USA
Corezyn isophrhalic pulrrusion resins are used in diverse applications such as nuclear power plant cooling tower grids, fence stock, tubes and structural shapes, fuse bodies, walkway grids and window lincals. Formulated with a wide range of catalyst and physical capabilities, our pultrusion resins, designated with a prefix of "30," are ...
-
Distributed by QuakeWrap Inc.based in USA
The dry/wet loading cycle in cooling towers provides an ideal environment for corrosion of the structure. Many of these cooling towers are constructed with concrete, and the reinforcing steel corrodes after a short service life. In addition, larger cooling towers such as those used in the nuclear power industry include concrete beams and ...
-
Manufactured by DRS Consolidated Controls, Inc. (DRS-CCI)based in USA
PLµS 32 is an integrated control system designed specifically for the nuclear power generation industry. PLµS 32 provides a complete spectrum of functions including loop control, logic, analog and sequential control, and data acquisition and management. The hardware and software modularity of PLµS 32 provides ...
-
based in USA
The composite bell shield provides gamma and neutron shielding during dry cask operations. The cylinder provides shielding around the transfer cask and above the work platform. Typically, atop the cylinder is a 6” tall and 6” thick ring that reduces shine from the canister lid and annulus gap areas. The bell shield is supported by sitting atop the transfer cask, and can be ...
-
based in USA
Custom fit to any plant’s steam generators, these magnetically secured lead wool panels provide shielding between the worker and the side of the steam generator. The magnetism of these blankets allow for quick installation on any carbon steel surface while offering a significant dose ...
-
Manufactured by Wagner Plate Works (WPW)based in USA
Bertsch Bending Roll: Founded in 1879, Bertsch is a leader in the roll bending ...
-
Manufactured by Pawling Engineered Products, Inc.based in USA
Pneuma-Seal custom inflatable seals, inflatable clamps, and inflatable actuators have been used in thousands of applications worldwide. From inflatable seals used in conjunction with sliding doors in semiconductor processing equipment, to inflatable clamps used to bond aircraft wing sections, Pneuma-Seal profiles solve problems that conventional products cannot. ...
-
Manufactured by Advanced Ceramic Materials (ACM)based in USA
Boron Carbide, or B4C, is an extremely hard ceramic material discovered in 1899. The Mohs hardness of boron carbide is about 9.49, ranking the third hardest materials behind diamond and cubic boron nitride. It was applied widely in industries as wearing resistant material, ...
-
based in USA
The primary use of coal is for combustion processes that drive electricity generation, steel production and cement manufacturing. TerraPower is demonstrating technology that can convert – rather than burn – this abundant U.S. resource into high-value products suitable for transportation fuels, chemical industry feedstock and even advanced materials like carbon ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you