Nuclear Power Plant Equipment In USA
-
by AREVAbased in USA
As well as being integral to AREVA's operations, nuclear reactors are also central to the Nuclear Measurement business unit. The business unit offers solutions to meet all power plant ...
-
Manufactured by Clariant International Ltd.based in GERMANY
Iodine Absorption in Nuclear Power Plants - For the removal of radioactive iodine in nuclear power plants and reprocessing plants there is a series of adsorber systems available, proven over decades. These are based on silver or potassium iodide, supported by acid resistant ...
-
Manufactured by GE Power & Waterbased in USA
The GE nuclear power conversion solutions for large and very large reactors are based on our Arabelle steam turbine technology platform. Arabelle steam turbines deliver power from 700MW to 1,900MW in both 50 and 60 Hz cycles and can be adapted to any heat sink conditions with a choice of low pressure modules and types of last-stage blades. ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
Nuclear power plants use nuclear technology to generate energy and are therefore particularly obliged to pay attention to safety. The smooth operation of a nuclear power plant requires know-how and professional expertise - from conception to regular maintenance. ARNOLD supports ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
temperatures in turbines. Further areas of application for semi-finished products of Ni-based superalloys are chemical plants with extreme requirements for corrosion resistance as well as nuclear power ...
-
Manufactured by CIPP Corporation, Inc.based in USA
Corezyn isophrhalic pulrrusion resins are used in diverse applications such as nuclear power plant cooling tower grids, fence stock, tubes and structural shapes, fuse bodies, walkway grids and window lincals. Formulated with a wide range of catalyst and physical capabilities, our pultrusion resins, designated with a prefix of "30," are ...
-
Manufactured by CECO Environmentalbased in USA
Nuclear Moisture Separator Reheater Vessels (MSR) are installed between the high pressure and the low pressure steam turbines at a nuclear power plant. This technology is utilized to remove water condensed from the process steam to maximize thermal efficiency of the low pressure turbine and minimizes erosion/corrosion of steam ...
-
Manufactured by Wagner Plate Works (WPW)based in USA
Bertsch Bending Roll: Founded in 1879, Bertsch is a leader in the roll bending ...
-
Manufactured by Advanced Ceramic Materials (ACM)based in USA
Boron Carbide, or B4C, is an extremely hard ceramic material discovered in 1899. The Mohs hardness of boron carbide is about 9.49, ranking the third hardest materials behind diamond and cubic boron nitride. It was applied widely in industries as wearing resistant material, ...
-
based in USA
We have provided construction services for more than 100 years for marine-based infrastructure. In 2022, we acquired Harbor Offshore, Inc. (HOI). HOI is known globally as the standard for maritime security protection and is the first company licensed by the US Navy to reproduce its waterside perimeter barrier system for commercial application. HOI's experts joined our team, bringing their ...
-
Manufactured by AZZ Inc.based in USA
Around the world, AZZ’s isolated phase bus systems are found in a wide range of critical applications that demand the highest degree of reliability. For decades, plants and facilities have counted on AZZ’s knowledge and expertise in custom-designed solutions to deliver unmatched performance in isolated phase bus ...
-
Manufactured by Doosan HF Controls Corporationbased in USA
industrial standard interfaces to minimize impact to other plant systems and platforms. Based on these features, the HFC-6000 becomes the optimal choice for the functions being ...
-
Manufactured by CECO Environmentalbased in USA
A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used ...
-
Manufactured by Ansaldo Energia S.p.A.based in ITALY
cycle to provide the entire power island, to the complete turnkey ...
-
Manufactured by Howdenbased in UNITED KINGDOM
Spencer solves air and gas handling challenges that are so difficult, sometimes the only alternative to our involvement is to change the process. When you don’t have that option, Spencer capabilities and our Engineering Edge are your best resources. High-performance blowers and gas boosters can be built to handle corrosive and toxic sulfides, halogens, acids, flue and stack gases, cyanides ...
-
Manufactured by Heliix, Incbased in USA
Conventional solar thermal collectors increase the temperature of a working fluid to levels that existing technologies are unable to efficiently exploit. Heliix’s PhaethonTM is a completely innovative device, which efficiently transforms the heat of low temperature fluids into electricity, using a ground-breaking thermodynamic cycle. ...
-
by Jonas Inc.based in USA
Flow-accelerated corrosion (FAC) is the combined actions of corrosion and erosion in the presence of a moving fluid (liquid water or wet steam), resulting in the loss of material and localized reduction of wall thickness. The geometry of each piping component and the temperature of the fluid are the major influences on the rate of FAC. The highest wear rates are around 150°C (300°F). ...
-
Manufactured by COB Industries, Inc.based in USA
Qwik-Freezer equipment utilizes liquid carbon dioxide (CO2) to freeze stationary water in selected sections of pipe or tubing. By producing very low 'dry ice' temperatures, Qwik-Freezer forms a secure in-line ice plug. This temporarily isolates the water in the system and allows repairs or modifications to be made without draining down or shutting off ...
-
by NATS, Inc.based in USA
Nuclear power is electricity generated by power plants that derive their heat from fission in nuclear reactors. Its share is rapidly growing in emerging economies with high energy growth demands. 2,586a: TERAWATT HOURS OF ELECTRICITY IN 2019. 10: EQUIVALENT TO THE GLOBAL ELECTRICITY GENERATION. 2nd: LARGEST ...
-
Manufactured by VDM Metals International GmbHbased in GERMANY
Nickel alloys from VDM Metals are characterized by extreme corrosion resistance and heat stability and are easy to process. Their nickel content of at least 30 percent makes them an important material for use in the chemical process industry, in energy and environmental engineering, and also in the electronics and electrical engineering sectors. Each of our alloys has a unique combination of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you