Refine by
Overhead Line Equipment & Supplies
98 equipment items found
by:Safegrid Oy based inEspoo, FINLAND
Meet Safegrid’s wireless fault passage indicator (FPI) Grayhawk™ designed to monitor overhead lines with high-frequency measuring for accurate and fast ...
Manufactured by:Shine Industries based inVadodara, INDIA
OLIS provides retrofit insulation for overhead conductors to help prevent electrical outages caused by trees or wildlife coming into the contact with distribution lines. It is manufactured from high quality Non-Tracking Cross Linked Polyolefin material. Easy & quick installation widely used in the electrification railway and naked wire in substation for ...
Manufactured by:Sentient Energy, Inc. based inFrisco, TEXAS (USA)
The Sentient Energy ZM1 is an intelligent overhead line sensor with substation-class measurement, computing and processing capabilities. The ZM1 is battery-powered and can be deployed on power lines with lower current such as overhead low-load feeders, lateral lines, feeder tie points and rural distribution ...
Manufactured by:KONCAR - Electronics and Informatics Inc. based inZagreb, CROATIA
The converter is fed by 25 kV, 50 Hz overhead line. It is used in order to supply various loads inside the substation facilities (power supply for integrated lighting and information systems, railway signaling and protection systems, etc.). Overhead line might generate spikes, sags and surges caused by the current drawn from ...
Manufactured by:KONCAR - Electronics and Informatics Inc. based inZagreb, CROATIA
Converter is fed by 3 kV DC overhead line. It is used in order to supply various loads inside the substation facilities (power supply for integrated lighting and information systems, railway signaling and protection systems, etc.). Overhead line might generate spikes, sags and surges caused by the current drawn from locomotives. ...
Manufactured by:Romind T & G based inPANTELIMON City, ROMANIA
Intended use: live works on LV overhead lives with bare conductors, in order to maintain the continuity of power circuits. Application: from height by hanging the self-tightening clamp on the conductor and pulling down the ...
Manufactured by:R&S International Holding AG based inSissach, SWITZERLAND
Rauscher & Stoecklin offers a range of overhead line disconnectors and load-break switches designed for distribution overhead lines. These highly reliable switches can be installed horizontally or vertically on wooden, concrete, and steel poles, making them versatile for various applications. ...
Manufactured by:ABKELK based inBeylikdüzü / ISTANBUL, TURKEY
This protection cover used VHD pin type insulator in electricity distribution lines. Provide perfect electrical insulation, proven according to TS EN 60060-1:2013. V0 fireproof feature, according to TS EN 60695-2-11:2014. Halogen free structure acoording to ASTM D2702-05. This product has superior mechanical strength according to TS ISO 37. Lonf life and high resistance to UV rays. High ...
Manufactured by:T&R Test Equipment Ltd. based inGuildford, UNITED KINGDOM
The LLT-3.3kV Live Line Tester Kit by Edgcumbe is engineered for precise measurements in live voltage testing and phasing applications primarily on overhead lines, substations, and switchgear compartments. The kit is composed of robust materials including fiberglass rods and polycarbonate mouldings, making it apt for both indoor and outdoor ...
Manufactured by:Atriy Electronic Appliances Trading LLC based inDubai, UNITED ARAB EMIRATES
Lodestar CL25 models is a simple solution for fault detection. Optimal factory settings allow CL25 to be used without any configurations in most cases. Just activate the device and place it on a conductor - CL25 will do its job in the best possible ...
Manufactured by:Henan Qingzhou Cable Co., Ltd. based inGongyi City, CHINA
AAC – The full name: All Aluminum Conductor. It is for stranded 1350 aluminum conductors and is primarily used for overhead transmission and distribution services, where strength of standard ACSR cables is not required. These conductors are used in low, medium and high voltage overhead lines. Class AA for bare conductors used in ...
Manufactured by:Henan Honrey Cable Co.,Ltd based inZhengzhou City, CHINA
All aluminum alloy stranded conductor, aslo know as aaac sorbus conductor, is mainly used for long-distance overhead lines, but also can be used as overhead line bearing line or other cable core. Mainly ASTM B399 standard, BS EN50183 standard, BS3242 standard, IEC61089 standard, French standard, DIN standard and ...
Manufactured by:BHB Waschanlagen Vertriebs GmbH based inHolzmaden, GERMANY
Built as two self-driving wash carriages with 1-2 side brushes and an optional front brush on each side of the rails. Configured for washing trains in drive-through wash halls with overhead line, or for washing ...
Manufactured by:Techno Group of Trade and Industries based inDammam, SAUDI ARABIA
Description: Double Arming Plate ( 100 x 12 x 700 mm). Item code: FP 5000 09. Material: Mild Steel. Material Grade: ASTM A 36. Application: Overhead Line. Approval: Saudi Electricity company. Finish: Hot Dip galvanized as per ASTM A 123. Ordered by: Item ...
Manufactured by:Techno Group of Trade and Industries based inDammam, SAUDI ARABIA
Item code: FP 5000 26. Product range: 45 KN (UTS). Material: Aluminum Alloy. Material Grade: LM 6. Application: Overhead Line. Approval: Saudi Electricity company. Finish: Shiny finish for the body, Hot Dip galvanized as per ASTM A 123. Ordered by: Item ...
Manufactured by:Techno Group of Trade and Industries based inDammam, SAUDI ARABIA
Item code: FP 5000 10. Material: Mild Steel. Material Grade: ASTM A 36. Application: Overhead Line. Approval: Saudi Electricity company. Finish: Hot Dip galvanized as per ASTM A 123. Ordered by: Item ...
Manufactured by:ZMS Cable Group based inZhengzhou City, CHINA
The 2x25mm2 pre-assembled cable is used for the distribution of overhead lines up to 1,1 kV. It is usually placed with supports on the posts or on the exterior walls. Its main advantages are low cost, easy installation and short placement time. ...
Manufactured by:Nortroll based inLevanger, NORWAY
LineTroll 110Eμ is a line mounted indicator for detection of PtG and PtP faults in overhead line networks. The indicator is powered by replaceable long-life lithium batteries which have a life expectancy of 10-15 years. It provides a 360 degree visibility for indication both for transient faults and permanent ...
Distributed by:InterEng Messtechnik GmbH based inZschorna, GERMANY
The InterFlex 130 can be used by all utility companies to determine the location of cable faults in energy and control cables (underground cables and overhead ...
Manufactured by:Tesmec S.p.A based inGrassobbio (BG), ITALY
The current method for replacing overhead lines conductors involves attaching a new conductor to the existing conductor, placing conductor travellers at each intermediate structure and then winching in the existing conductor and coiling it onto an old ...