Refine by
Partial Discharge Testing Equipment & Supplies
24 equipment items found
Manufactured by:Wuhan UHV Power Technology Co., Ltd. based inWuhan City, CHINA
The UHV-2000A multi-channel partial discharge detector is a 2-channel, desktop, TFT LCD display with reliable system and low failure rate. In addition to being used for partial discharge measurement of high-voltage electrical equipment (standard), it can also be used for online continuous monitoring of partial ...
Manufactured by:Solfas Technologie GmbH based inBerlin, GERMANY
The GHV2000 is a high-voltage safety tester designed for precise dielectric testing of electronic devices such as transformers, chokes, and coils. This tester features a 6kV AC output with adjustable voltage regulation and overcurrent protection up to 100mA, ensuring accurate and safe testing processes. It supports both AC and optional DC high-voltage ...
Manufactured by:Vidac Solutions based inFenton, MISSOURI (USA)
Partial Discharge testing is a way of detecting voids or imperfections in insulators that would lead to overheating and breakdown under normal operating conditions. Due to the nature of the signal being measured, this test is very susceptible to electronic and RF noise and a proper corona-free properly isolated ...
Manufactured by:Jay Industrial Repair based inBirmingham, ALABAMA (USA)
Rewind and Recondition for Ratings through 13.8 kV, Field Testing and Inspection of Hi-Voltage Motors and Generators, 100,000-LB lift capacity, No-load Test Run at full voltage, Hot Press B-Stage 13kV Precision Coil Insulation Systems, Global VPI 13kV Precision Coil Insulation Systems, Coil Tan Delta, VET and Partial Discharge ...
Manufactured by:Vidac Solutions based inFenton, MISSOURI (USA)
This Partial Discharge tester allows for increased production throughout by testing multiple parts at one time. Vidac Solutions was able to build a tester that could Hipot two parts simultaneously and then perform the Partial Discharge testing one part at a time. It is critically important to ...
by:OMICRON Energy Solutions Private Limited based inNew Delhi, INDIA
Our UHF 800 system enables you to perform partial discharge (PD) measurement and analysis with high sensitivity in the ultra-high frequency (UHF) range of 100 MHz to 2 GHz. It offers a reliable partial discharge testing alternative to conventional PD measurements according to the IEC 60270 standard for ...
Manufactured by:Lint Top Cable Technology Co., Ltd. based inXuzhou City, CHINA
Long-distance high-voltage XLPE cables have been widely used in urban construction. In order to ensure the safe operation of the line, the handover acceptance test must be carried out before the power cable is put into operation, so as to avoid the loss of operation failure caused by mechanical damage, installation process defects and other problems. The basic design of the AC ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The PD-SG1 is a dual transducer Switchgear PD detection instrument. The unit detects TEV signals generated by internal discharge, as well as acoustic discharge generated by surface tracking or corona. Partial discharge activity inside metal clad high voltage plant induces small voltage impulses (called Transient Earth Voltages) on the surface of the metal cladding. TEVs travel around the cladding ...
Manufactured by:Powerhv based in, CHINA
High-voltage dividers are used to measure voltages and decouple partial discharges in high-voltage test systems. Depending on the specific type, they are used to measure alternating voltage (AC), direct voltage (DC), lightning impulse voltage (LI), and switching impulse voltage (SI) systems. High-voltage dividers by PowerHV comply with the ...
Manufactured by:Varelen Electric Co., Ltd. based inChangsha City, CHINA
High short circuit withstand ...
Manufactured by:Varelen Electric Co., Ltd. based inChangsha City, CHINA
Non-flammable and self-extinguishing. Insulated with an epoxy resin - environmentally ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The PD Detector is an on-line partial discharge (PD) spot tester for HV assets. The instrument detects TEV signals generated by internal discharge in Air Insulated Switchgear (AIS), acoustic discharge generated by surface tracking or corona, high-frequency signal generated by cable partial discharge, and ultra-high frequency signal generated by internal discharge in Gas Insulated Switchgear ...
Manufactured by:Hans von Mangoldt GmbH based inAachen, GERMANY
Filter chokes protect reactive power compensation equipment from overload caused by excessive harmonic levels in medium and low voltage distribution systems. They are also used in a variety of configurations of harmonic filters to remove unwanted harmonics from electric power systems. MANGOLDT produces iron core filter chokes for low and medium voltages, in single- or three-phase construction, ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
The PD Alarm is an asset mounted device for indicating the presence of partial discharge in high voltage switchgear, ring main units (RMUs) and dry type transformers. Designed for use in small substations, the instrument can activate local and remote alarms in addition to local ...
Manufactured by:CEEG Transformer CO., Ltd (CEEG) based inNanjing City, CHINA
First-class product quality in ChinaThe first-class R & D team in the industry ensures that the performance indicators of products meet or exceed the national standards, introduces scientific management mode, and standardizes the operation of each process to ensure the excellent quality of each product. Flexible design to meet the needs of different users. According to the actual needs of ...
Manufactured by:Quantel Pte Ltd based inSingapore, SINGAPORE
The Chroma 19501-K Partial Discharge Tester integrates hipot testing and partial discharge (PD) detection in a single device. It offers a maximum output of 10kV AC, a leakage current measurement range from 0.01uA to 300uA, and a minimal PD detection capacity of 1pC. This tester is particularly designed for ...
Manufactured by:IPEC Ltd based inManchester, UNITED KINGDOM
PrecisePD is an on-line Partial Discharge Spot Testing and Location System for Cables and Switchgear with advanced signal processing, used for the detection of PD in high noise environments. PrecisePD allows users to investigate and locate Partial Discharge sources on live electrical equipment, helping to prevent ...
Manufactured by:Solcon-IGEL based inDortmund, GERMANY
The HRVS-DN is a heavy-duty Medium Voltage Soft Starter, designed for all Medium Voltage AC induction motors running any industrial application. Designed with sophisticated motor control technology that ensures smooth acceleration and deceleration as it significantly reduces the effect of high in-rush current and mechanical torque shock. The flexible design, enhanced motor protection and a ...
Manufactured by:ZMS Cable Group based inZhengzhou City, CHINA
Like other power cables, High voltage XLPE cables typically consist of one or three conductors, insulation, and a sheath structure. High Voltage Underground Wire Cables differ from low voltage cables in that they also have an inner layer within the insulation sheath to control the electric field around the conductors. For circuits running at relatively high voltages between conductors, the ...
Manufactured by:Taurus Powertronics Pvt Ltd based inBengaluru, INDIA
LID-UPD ( Leaky Insulator Detector, Ultra Sound Partial Discharge Detector); Complete Solution FOR SUBSTATION ASSET MONITORING- An early warning before ...