Only show results in Virginia? Ok

Photovoltaic Cell equipment

  • Photovoltaic (PV) Cells

    Photovoltaic (PV) cells use sunlight to generate electricity. The modules Hallmark Power use are LG, Schott, REC and Suntech – poly and mono construction combined with SMA or Fronius inverters. These are high quality panels which are very efficient & have a very low rate of degradation over their lifetime. Installation schedule is 3 ...

    By Hallmark Power Limited based in Leicestershire, UNITED KINGDOM. from Solar PV Panels Product line

  • Multicrystalline Photovoltaic Solar Cell

    KPE's calibration standards shall be in compliance wit※h the standards applied by ECN.

    By KPE Co., Ltd. based in Busan, NORTH KOREA.

  • Calibrated Reference Photovoltaic Solar Cell

    To insure repeatable testing on any solar simulator, OAI offers 2cm x 2cm calibrated reference cells. Standard reference cell calibration cycles can be set up by OAI's calibration laboratory to insure that your reference cell maintains certification.

    By OAI based in San Jose, CALIFORNIA (USA).

  • GPP - Solar Cells

    Solar cells on a silicon basis pass through several process stages during automated manufacturing. Testing is necessary in every critical process stage to be able to provide for constantly good quality.

    By GPP Chemnitz mbH based in Chemnitz, GERMANY. from Photovoltaics Product line

  • Model 4JET - Laser Edge Deletion of Thin Film Solar Cells

    Our systems for laser edge deletion of thinfilm solar panels offer numerous advantages over mechanical sandblasting or the use of grinding wheel technology.Touchless process without glass damage or micro cracks. Dry process without blasting grid or chemicals, less waste Volume, more environmentally friendly. Effective ablation of TCO, ...

    By 4JET Technologies GmbH based in GERMANY. from Photovoltaics Product line

  • Centrosolar - Model B-Series 60 Cell - Photovoltaic Modules

    The Centrosolar B-Series module is powered by some of the highest performance and most reliable silicon cells in the solar industry. The B-Series module is engineered and tested to the highest possible standards and is recognized throughout the world for its ability to deliver lifetime performance and, most importantly, maximized kWh yield.

    By Centrosolar based in Scottsdale, ARIZONA (USA). from PV Module Product line

  • PLASMA - Model PECVD - Batch Type System

    Batch-type system for passivation and nitride coating in c-Si solar cell processing. centrotherm is the world market leader in the field of Plasma Enhanced Chemical Vapor Deposition (PECVD) for passivation and anti-reflective coating processes in the manufacturing of c-Si solar cells.

    By centrotherm photovoltaics AG based in Blaubeuren, GERMANY. from Photovoltaics Product line

  • ASLS - Model 40 - Laser Scribing System

    The Laser Scribing System (ASLS) is a high-precision laser cutting tool used in photovoltaic module manufacturing lines. Its purpose is to cut the deposited layers of the panels thus dividing them into individual solar cells. Continuously adjusted infrared and visible Nd:YAG lasers cut the silicon, metal and metal-oxide layers, while they move ...

    By Greensolar Equipment Manufacturing Ltd based in Budapest, HUNGARY. from Photovoltaic Product line

  • ASLS - Model 30 - Laser Scribing System

    The Laser Scribing System (ASLS) is a high-precision laser cutting tool used in photovoltaic module manufacturing lines. Its purpose is to cut the deposited layers of the panels thus dividing them into individual solar cells. Continuously adjusted infrared and visible Nd:YAG lasers cut the silicon, metal and metal-oxide layers, while they move ...

    By Greensolar Equipment Manufacturing Ltd based in Budapest, HUNGARY. from Photovoltaic Product line

  • GPP - Robot Control

    The GPPVision-module RobotControl serves to recognize the position of solar cells and solar cell panels and transfers these data to the robot control.It can be used for the handling of solar cells but also in string and panel manufacturing.A vacuum gripper handles the cells and places them above the vision system. SolarCellInspect inspects the ...

    By GPP Chemnitz mbH based in Chemnitz, GERMANY. from Photovoltaics Product line

  • GPP - Solar Panels

    The intake control in string manufacturing is a quality control of the solar cells supplied. Moreover, a classification of cells according to technical and also optic-visual parameters is often executed at this stage in order to produce panels with balanced characteristics.

    By GPP Chemnitz mbH based in Chemnitz, GERMANY. from Photovoltaics Product line

  • GPP - Electroluminescence

    The electroluminescence measurement is typically used for cell characterizing in cell testers. Crystalline silicon solar cells are tested and classified before the solar panel manufacturing. The GPP Vision system SolarCellInspect.EL is able as manual standalone system as also as inline system. It especially detects optical-unvisible defects, like ...

    By GPP Chemnitz mbH based in Chemnitz, GERMANY. from Photovoltaics Product line

  • Trosifol - Model R100 - Solar PVB Films

    If Trosifol Solar PVB films are to be used in a conventional module type or in a module type with a new cell technology, Trosifol's Technical Service should be contacted. For the crystalline solar cells most frequently produced and processed internationally, PVB films Trosifol Solar R40 and Trosifol Solar R100 transparent are used, and exclusively ...

    By Kuraray Europe GmbH - Division Trosifol based in Troisdorf, GERMANY. from Photovoltaics Product line

  • Jonas & Redmann - Model WIL and WIU - Wet Inline Loader & Unloader

    As a rule, the wafers in the manufacture chain for silicon solar cells also undergo wet chemical procedures. The wafers are cleaned in an etching bath, saw damage is eliminated and they are textured. Another treatment removes the phosphorus silicate glass, which is formed as a by-product of the diffusion process. These process steps can be carried ...

    By Jonas & Redmann Group GmbH based in Berlin, GERMANY. from Photovoltaics Product line

  • BIPV-Building Integrated Photovoltaics

    Building integrated photovoltaics have to satisfy two principal needs: the production of renewable energy and the fulfilment of an architectural function. In brief, they have to serve the needs of man and those of the environment in which he lives. Architectural creativity and design must be expressed in harmony with functionality, ecology and ...

    By FAR Systems S.p.A. based in Rovereto, ITALY. from Photovoltaic Product line

  • Silicon Thin-Film Cells

    Silicon thin-film solar cells are based on amorphous (a-Si) or microcrystalline silicon (μc-Si). These solar cells require semiconductor layers (absorbers) of a thickness up to 2 μm. The semiconductor layers are deposited at low process temperatures on large-area, low-cost materials, primarily glass, but also on metal strip or polymer films. ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CdTe Thin-Film Solar Cells

    CdTe thin-film solar cells are composed of a transparent conductive front contact layer,a thin n-conducting CdS-layer, a p-conducting CdTe absorber layer and a metallic back contact. The preferred substrate material is glass, just like with a-Si/µc-Si and CIGS thin-film cells. However, the use of metal strip and polymer films (PI) is also ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Micromorph Thin-Film Solar Cells

    Micromorph thin-film solar cells combine both amorphous and microcrystalline silicon in one cell and belong to the group of the so-called multi-junction cells for which two (tandem cell) or more semiconductor layers are deposited alternately one above the other. As for micromorph silicon tandem cells, the absorption spectra of amorphous and ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • CIS Thin-Film Solar Cells

    The basis of a CIS thin-film solar cell is a compound semiconductor based on copper, indium, selenium and/or sulfur – CuIn(Ga)(Se, S)2. The p‑conducting CIS layer of up to 3 μm thickness is combined with an n‑conducting CdS‑buffer layer (up to 50 nm). Adding gallium to the semiconductor increases the energetic efficiency ...

    By VON ARDENNE Anlagentechnik GmbH based in Dresden, GERMANY. from Photovoltaic Layer Systems Product line

  • Topsun - 300W to 320W in 72 Cells - Photovoltaic Modules

    Topsun's Crystalline Photovoltaic Modules are manufactured under Integrated Management System (ISO 9K: ISO 14K: BS 18K) for quality and safety environment. Offers high efficiencies, consistent performance life, quality workmanship and AR coated antimony free glass material. High power modules precisely manufactured to achieve better module ...

    By Topsun Energy Limited based in Gandhinagar, INDIA. from Solar Crystalline Photovoltaic Modules Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you