Photovoltaic Mounting Equipment In Europe
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
Our company has been one of the most successful German suppliers of PV mounting systems on the ground-mounted market for many years. However, our C and U profiles made of high-alloy steels with the characteristic rows of holes have not only been used "in the field" over the years. In fact, we have been able to realize a number of ...
-
Manufactured by S:FLEX GmbHbased in GERMANY
The advantages of the S:FLEX insertion system at a glance: Can be installed as a PV facade system or used on noise barrier walls and solid balustrades on balconies. Components for a special look also available in black. Suitable for module frame heights of 25 to 45 mm - using just one type of insertion rail. Thanks to the hollow chamber profile, the rail has a very high static load-bearing ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
Incorrectly installed support systems can cause damage to the sensitive roof cladding. The result is moisture damage inside the building as well. In order to optimally protect the roof cladding, the mounting racks we install are always placed on weather-resistant building protection mats. The triangular constructions pre-assembled on the ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
The two-support system is a very cost-efficient solution with two vertical columns and additional bracing by a diagonal strut. Instead of one or two solid supports without additional bracing, this system creates a flexurally rigid truss via the diagonal. This has equivalent load-bearing properties while using less material. Furthermore, the bearing forces on the ground are significantly reduced, ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
The photovoltaic mounting system consists of only one support and a diagonally running strut and can be used worldwide. As with the other systems, the module type and arrangement can be freely selected. A characteristic feature of the system is the deliberate omission of further supports. The solution is particularly suitable for very ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
Orienting the modules to the east and west can make economic sense if the following applies to the planned photovoltaic system: North-south oriented systems can shade each other and must therefore be installed with sometimes quite large row spacing. This effect does not occur with an east-west arrangement: The row spacing can be ...
-
Manufactured by Profilodomibased in GREECE
Mounting System PD.4I.2P on a single driving pile with 2 panels portrait for open field areas. One IPE120 steel beam driving pile, Hot-Dip Galvanized, All parts are made of high strength galvanized steel. Strong rafter with 3 points of support Diagonal braces. Clamps are made of stainless steel. Wind Resistibility: Up to 33m/sec ...
-
Manufactured by Corab S.A.based in POLAND
Corab WS-024R is one of the options of universal WS-024 system, adapted to modules with a width of 990-1149 mm and a height of 1650-2220 mm. WS-024R is fixed to the ground with a system of hammered pipes without any special equipment. Made of high quality Magnelis steel. It comes in three varieties that differ in the method of fixing to the ...
-
Manufactured by Aerocompact GmbHbased in AUSTRIA
The demand for ground mounted photovoltaic systems have changed. Due to falling prices of solar modules; land, assembly and installation costs currently make up a larger share of the overall system costs. This results in tighter and denser module layouts; the horizontal alignment of modules is preferred in order to reduce losses from the ...
-
Manufactured by PohlCon Solar GmbH & Co. KGbased in GERMANY
be used in all system variants from single-support systems to east-west systems. Thin-film or crystalline modules can also be used. Mounting is done by means of the usual standard fastening. There are no additional costs for our customers when using ...
-
Manufactured by Premium Mounting Technologies GmbH & Co. KGbased in GERMANY
As a photovoltaic mounting system, PMT EVO 2.1 EW is the best solution for flat roofs with an east-west elevation of the modules. With PMT EVO 2.1, PMT focuses on safety and quality as well as short installation time and cost ...
-
Manufactured by Premium Mounting Technologies GmbH & Co. KGbased in GERMANY
The innovative, pre-assembled solution with high installation friendliness and maximum reliability: As a photovoltaic mounting system, PMT EASY is the prerequisite for efficient and safe installation of solar modules on flat ...
-
Manufactured by Premium Mounting Technologies GmbH & Co. KGbased in GERMANY
As a photovoltaic mounting system, PMT EVO 2.1 EW is the best solution for flat roofs with an east-west elevation of the modules. With PMT EVO 2.1, PMT focuses on safety and quality as well as short installation time and cost ...
-
Manufactured by Bisol Group, d.o.o.based in SLOVENIA
Simply use the EasyTool, a project and design tool to plan your solar power plant in detail with your wishes and needs in ...
-
Manufactured by Ptolemeo SAbased in GREECE
Suitable for all kind of photovoltaic modules. Maximum mounting flexibility, efficient design and ease of assembly. Galvanized in hot steel components with warranties exceeding life-span. Reduced material and labor ...
-
Manufactured by Omnia Spatial Structuresbased in ITALY
Our Photovoltaic Panels Mounting System is simple, practical, easy to be installed and made to measure. The Omniablok system has been designed to facilitate and speed up the laying, mounting and fitting of the photovoltaic panels that make up the entire solar plant. Each Omniablok photovoltaic panel structure is ...
-
Manufactured by Praxia Energy S.L.based in SPAIN
, StructuralNorms:EUROCODE(Europe);ASDyLFRD(USA);JISC(Japan), Structural calculations arespecifically doneforeachproject, Stainless steel fasteners AISI 304 A2 for the modules and galvanized for the steel profiles. Procedure: Structural calculations, Design of the mounting system, Lay Out, Supply to any part of the world. Production: Design and structural ...
-
Manufactured by National Oilwell Varco (NOV)based in USA
SunLink’s HomeRun LTE line of solar combiner boxes feature a lower price point, more compact enclosures and a streamlined feature set without sacrificing the signature quality of the HomeRun ...
-
Manufactured by Pure Energy Centre (PEC)based in UNITED KINGDOM
The Pure Energy centre are specialist solar photovoltaic system designers and installers. We supply complete solar photovoltaic systems including modules, mounting kits, batteries and inverters. We work closely with developers, architects, farmers, crofters, businesses and the public sector as well as homeowners in designing, ...
-
Distributed by ATB-Becker Photovoltaik GmbHbased in AUSTRIA
Also in the field of mounting systems, we only rely on components which have been successfully proven over the recent years. Due to our close cooperation with the Schletter company we are able to integrate our requirements on new products and therefore expand their product range constantly. The PV-mounting system by Schletter is a modular ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you