Power Distribution System Equipment
-
Manufactured by Gull Wing Industries, Inc.based in USA
The MGW is our mini Gull Wing distribution system that is UL listed with modules that can be easily changed in the field for flexibility in the ...
-
Manufactured by F. Walther Electric Corporationbased in USA
Walther Electric welcomes the opportunity to manufacture custom power distribution systems (PDS) built to your requirements. Our application engineers are ready & willing to provide assistance and support during the technical specification & design process. The Walther combination outlet system uses standard NEMA wiring ...
-
Manufactured by Gull Wing Industries, Inc.based in USA
Our GW series portable power distribution system is rugged job after job, easy to handle, and brings the power unit to the job rather than taking the job site to the power pole. Applications include job sites, plant maintenance, festivals, special events, and carnivals . Built in 50 or 100 amp, 1 or 3 ...
-
Manufactured by Larson Electronics LLCbased in USA
The Larson Electronics MGL25-8C-480-120V-GFI Temporary Power Distribution System converts 480 VAC three phase electrical current to single phase 120V AC and 240V AC 60hz. This power distribution system provides operators the ability to safely tap into and distribute 480VAC ...
-
Manufactured by Larson Electronics LLCbased in USA
The Larson Electronics MGS-3X480.60A-150K-3X208.60A-12X120 heavy duty 3-phase power distribution substation gives operators the ability to plug in three 60-amp 480V devices into the primary panel. On the secondary side, operators can plug in twelve 20-amp 120V devices and three 60-amp 208V ...
-
Manufactured by Harbor Energy Solutions LLCbased in USA
Cable Bus is a power distribution system using multiple parallel conductors braced in a rigid enclosure. Each conductor is insulated and fully continuous from source to load. A standard range of cable bus systems are available from 600V to 218kV and up to 10,400 amps. However, cable bus systems are adaptable and ...
-
based in GERMANY
The power distribution system SVS14-10 optimises DC 24 V distribution on the field level in automated process control, industrial production and chemical plants. The system holds an integral ammeter (display 25 A) for the total current and offers ten ways for electronic and thermal-magnetic circuit breakers ...
-
based in GERMANY
The E-T-A power distribution system SVS02 is designed to accommodate the electronic circuit breaker series ESS20-003. It distributes the current supplied by a switch mode power supply up to 40 A to 4, 8, 12 or 16 channels. Mains connection is via screw terminals. The individual circuit breakers can be plugged in. ...
-
based in GERMANY
The power distribution system SVS15 for rail-mounting distributes the voltage potentials U1 and U2, which are supplied by a DC 24 V power supply, to 8 ways ( 4 x U1, 4 x U2) and protects the connected loads selectively by means of plugged-in circuit breakers. With a maximum load current of 8 A per way and a ...
-
based in GERMANY
The power distribution system SVS04 for DIN hat rail mounting is designed to distribute the current supplied by a switch mode power supply to 4 or 8 positions and selectively protects the connected loads by means of the plugged in circuit breakers. With a max. load current of 8A per channel and a max. total ...
-
based in GERMANY
The SVS09 power distribution system with integral signalling module optimises DC 24 V distribution at the machine-oriented field level in automated process control, production plants and power plants. Offering 10-plug-in sockets for electronic and thermal-magnetic circuit breakers and an integrated alarm handling ...
-
based in GERMANY
Each module accommodates two single pole plug-in circuit breakers with an individual housing width of only 12.5 mm and fits onto all industry standard mounting rails. The two-way modules can be mounted side-by-side to provide as many ways as required with a terminal block fitted at each end. A distribution busbar can be fitted on the supply ...
-
Manufactured by Amtec Industries Incbased in USA
Custom control and power distribution systems for all petrochemical industry ...
-
Manufactured by Harbor Energy Solutions LLCbased in USA
Designed to meet the unique challenges of electrical distribution in high rises, the revolutionary HighBus is the latest iteration of the SuperiorBus. HighBus is a custom-engineered, modular cable bus power distribution system designed for use in high rise apartment and office buildings. This innovative ...
-
Manufactured by Eurocardan S.p.Abased in ITALY
The drive shafts must be attached to the tractor’s power take-off (PTO) and to the implement’s one (PIC, PowerInput Connection). Eurocardan offers a wide range of fastening to meet different application ...
-
Manufactured by Scipar, Inc.based in USA
Scipar, Inc. provides modern and efficient solutions that offer automatic control and monitoring of hydroelectric plants. By developing and implementing state-of-the-art human machine interface technology, Scipar provides clients with the capability that allows system operators to observe a system’s current status and make control ...
-
Distributed by INGENCObased in USA
INGENCO can supply highly redundant, high quality, low-cost power. For more than 18 years, INGENCO has specialized in the design and construction of profitable Distributed Generation facilities. We design, build, install and operate (if desired) these small-scale multi-fueled power plants. We can turnkey an entire power plant ...
-
Manufactured by Gull Wing Industries, Inc.based in USA
This compact, lightweight portable power distributor is designed with portability and durability in mind. Available in G4, G6, G8, and G10 models, this system is UL and CUL listed. We welcome you to review our internal cut-away, side, back, front, and top view schematics. Constructed from aluminum to reduce weight, connections, and ...
-
Manufactured by Gull Wing Industries, Inc.based in USA
In addition to our portable power distribution units, we also custom fabricate unit enclosures, cabinets, and UL508A industrial control panels. Made from your choice of steel, aluminum, or stainless steel, our units are CNC program punched, bent, and powder ...
-
Manufactured by Gull Wing Industries, Inc.based in USA
Powder coat painted for ultimate durability, our UL-listed GD series generator distribution units can handle between 200 and 2,000 amps. Nema™ 3R rainproof construction, possum belly or flush mounted on the side of the trailer. For operator safety and accessibility, overcurrent protection and connections are located in same enclosure. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you