Power Generation Equipment In Bangladesh
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative combined heat and power configuration may be a more ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The mobileFLEX portfolio is the latest advancement from GE to deliver lower-cost, lower-emission power to drill rigs, artificial lift enhanced oil recovery and oilfield equipment. An all-gas alternative to diesel units, mobileFLEX is an EPA mobile-certified solution that provides a cost advantage to energy producers and operational ...
-
Manufactured by Thermax Limitedbased in INDIA
. With increased focus on technology development and market potential, costs are projected to come down in future. Internationally, solar power plant technology is still under development and hardly any efforts are made in India. Thermax is pioneering the indigenous development of solar thermal power plants. This development is focused on a cost ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. For maximum ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The Waukesha Series Four rich-burn engines are the engines of choice for the harshest and most demanding gas compression, power generation and mechanical drive applications. The engines can reliably produce more power on hot field gases, at high altitudes, and in remote locations, all while delivering low emissions when paired with a ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
services to the electricity grid, or to an individual consumer behind-the-meter. Energy storage may be deployed as stand-alone systems or with power generation as part of a hybrid energy system or microgrid ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
Inciner8 have developed a new Waste to Energy solution that utilises moving grate technology to provide a more consistent stream of waste fuel to power electricl generation 24/7. The i8-E35 has been designed from the ground up specifically for the waste to energy sector. It has been tested rigourously with a variety of RDF waste types to ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Clarke Energy recognised the requirements for a ‘power module’ based around the GE Jenbacher Type-6 engine. The power module scope which comprises of engine, enclosure, silencer cooling system and other key ancillary components has been optimised for the requirements of the Australian coal gas and remote power ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
by the inorganic constituents of the waste and may take the form of solid lumps or powder. In some cases, the heat generated by incineration can be used to generate electric ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Abandoned mine methane (AMM) can be recovered from disused coal mines. Abandoned mine methane (AMM) projects produce energy (thermal and electrical) with the added bonus of reducing atmospheric emissions of methane. Methane is a potent greenhouse gas and huge amounts of methane will escape from the mine for years to come following closure. Sealed abandoned mines offer an excellent opportunity for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you