Power Generation Equipment In United Arab Emirates
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Mars® gas turbine has been engineered for very high reliability and durability as well as ease of maintenance. Like Solar's other gas turbine families, Mars gas turbines are available for compressor, generator, and mechanical-drive ...
-
Manufactured by R Schmitt Enertec GmbHbased in GERMANY
ENERGIN GEN generators sets are designed for power production in island or parallel mode with other generators and/or the utility. They are based on the R Schmitt Enertec M Series Gas ...
-
Manufactured by OSMOSUNbased in FRANCE
Multiple Options To Implement The Solar Panels. The specific consumption among the lowest in the world of the OSMOSUN® units, with 2,5kWh/m3 produced with seawater at 35g/l, implies a solar generator of limited surface. The daily water production capacity depends on the solar generator power: about 0.75kWp, or 5 to 7 m² of ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan 130 continues Solar Turbines' legacy of highly reliable and durable gas turbine engines with low maintenance requirements. Like our other turbines used for power generation, the Titan 130 is also available for compressor and mechanical-drive ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 250 is our most powerful package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130. It provides 40 percent shaft efficiency with emissions reduced up to 30 ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar's modular concept for gas turbine generator sets has been optimized for transportation and the scope has been minimized for civil works with our Power Generation Module (PGM). Good for non-hazardous applications only, our PGM solution results in shorter installation and commissioning times, and reduces overall costs for our ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar’s modular solutions deliver cost and schedule predictability by reducing exposure to site construction risks, which can include weather, site location, security, labor availability, and more. Targeted standardization coupled with pre-fabrication can significantly improve project velocity. Installations feature reduced footprint, scalability, and re-deployability to adapt to changing ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar’s modular solutions deliver cost and schedule predictability by reducing exposure to site construction risks, which can include weather, site location, security, labor availability, and more. Targeted standardization coupled with pre-fabrication can significantly improve project velocity. Installations feature reduced footprint, scalability, and re-deployability to adapt to changing ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
If you need electricity and thermal energy simultaneously, a cogeneration system may be your solution, and can offer a favorable return on investment. Cogeneration allows you to benefit from two or three forms of energy for the price of one, with minimal environmental impact. These systems can turn clean-burning natural gas into cost-effective, reliable electricity, use steam for production ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Saturn gas®turbines have proven themselves in over 4800 installations. Introduced in 1960, they have logged more than 620-million operating hours and are available in a single-shaft, constant-speed configuration for driving ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Heat Transfer/Hot Oil Systems are designed to store and transfer heat transfer fluids used for industrial heating. The heat transfer fluid is normally stored in an elevated insulated vessel skid mounted. Special high temperature centrifugal pumps are used to circulate the heat media fluid from the storage tank through an electric process heater, gas fired heater or ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
The Integrated Flow Solutions 6012 Series Electric Heater Control Panels offer convenient, economical control of resistive loads. A broad list of configuration options allow the 6012 series control panel to fit most common electric heater control requirements. These pre-engineered, pre-wired panels require only sensor, load and power ...
-
Manufactured by Termomeccanica S.p.A. (TM.P.)based in ITALY
Can pumps designed for critical suction conditions. A solution with double suction first stage is available in order to operate with low values of NPSH ...
-
Manufactured by Evapco Inc.based in USA
An EvapTech EX Cooling Tower is an induced draft, crossflow tower custom designed to meet our customers' requirements for cost, footprint, power consumption and ...
-
Manufactured by Evapco Inc.based in USA
For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. These systems meet or exceed reciprocating engine ...
-
Manufactured by Integrated Flow Solutions, Inc. DXPbased in USA
Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. These systems meet or exceed reciprocating engine ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Centaur® gas turbines are at work today in thousands of installations both offshore and on land ranging from arctic to tropical ...
-
Manufactured by Elecnorbased in SPAIN
Elecnor is firmly committed to entering as a benchmark investor, diversifying its renewable energy portfolio with photovoltaic and thermoelectric solar energy projects. In this section, Elecnor has developed three 50 MW thermosolar plants, Astexol located in the municipality of Badajoz, and Aste 1A and Aste 1B, also of 50 MW each, located in Alcázar de San Juan (Ciudad Real), in which the ...
-
Manufactured by Elecnorbased in SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you